Strengthening of Amel (Amel) Water Supply Scheme in Betalghat, Nainital

Amount

Supply of all materials and construction of Pump house (3.60M X 3.0M) as per type design and drawing complete.

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/submain alongwith earth wire with the following size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required.

2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of metal box of 180 rnmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required.

Supply and fixing of following way S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/RCCB/Isolator)

6 Way double door ,

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of 20 W LED tubelight complete in all respect (Bajaj/Philips I Equivalent make)

Supply in fixing of LED external lighting luminaires with mounting bracket etc. complete.

S.I.T.C. OF KIRLOSKAR MAKE CENTRIFUGAL PUMP SET CAPACITY 40 HP, HEAD 260 MTR, DISCHARGE 300 LPM WITH BRONZE IMPELLER, HEAVY DUTY BASE FRAME , COUPLING AND COUPLING GUARD.

S.I.T.C. CG MAKE MOTOR FOR ABOVE PUMP 40 HP 2900 RPM

S.I.T.C. OF FULLY AUTOMATIC STARTER PANEL CAPACITY: 40 HP

Control Panel

Power wiring and earthing material

Main Piping & Valves a. CI D/F Sluice Valves PN1.0 – 02 Nos. b. CS D/F Sluice Valves Class 300 ASA – 04 Nos.(80mm dia) c. CS D/F Reflux valve class 300 ASA-02 Nos. (80mm dia) d. Necessary Pipe & Fittings-

Gauges

Tools

Erection of Pumping Plant

Commissioning of Pumping Plant

Painting

Submersible Pump Set

Submersible Pumping Plant Details are given Below

Supply of Submersible pumping plant of 300LPM, 195Mt. head 20H.P. suitable for 200mm dia Housing 3 phase 50Hz AC supply.

Spare Pump Set of same duty.

Submersible cable size 1x3x6sq.mm.

Control panel Cum starter suitable upto 20HP submersible pumping plant complete with al l protections.

Main piping and valve 80mm dia with all accessories i.e. Cast Steel sluice valve 2 Nos., reflex Cast steel valve 1No., Tee 1No., Bend-2 Nos., D/F pipes and 80mm dia 5.4mm thick M.S. column pipe 40Mt. complete with interlocking arrangement with 2 pair M.S. clamp.

Pressure gauge and depth gauge set with M.S. fitting.

Chain pulley Block of 2 Ton capacity 4 Mt. lift tested on 3.0 Ton load.

Special tools and spanners.

Painting of all accessories with 2 coats paint.

Installation and commissioning of pumping plant and all accessories.

Rubber Insulation sheet 1mt. x 2mt.

Chain wrench suitable for 80mm dia column pipe.

Double loop earthing material of all electrical equipment including all material such as earth plate, earth pipe. earth strip. watering pipe, coal and salt.

100Amp, TPN main switch.

Servo Control Voltage Stabilizer 40KVA suitable for regulating incoming voltage 300 to 480Volt, outgoing voltage 415Volt with 63Amp. change over switch and 3½Core copper cable, first filling of Transformer Oil and complete installation.

Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories.

Liquid Chlorine required for six month maintenance

Packing Jarrican 50Ltr. Cap.

Chlorine Testing Kit

Internal & External Electrification of Pump house

Freight, insurance and local cartage of pumping plant upto site.

Supply of three phase digital rolling contact servo voltage stabilizer suitable for unbalance voltage & load including fixing of proper size copper lugs on input and output cables on both ends at different sites on trunkey basis including 5 years cost free maintenance Input voltage 330-460 volts (Phase to phase) Capacity - 40 kva(According to Availablity) (40 kva as per calculation)

Preparing & Lowering of Tube Well Assembly Starting From G.L to the Required Depth as per unit estimate. Including Cutting, Welding etc. as Required at Site With Complete T & P Required for Proper Completion of Work. Drilling of Bore by heavy duty direct rotary rig machine in Alluvial, Boulders, Pebbles, Rocky Stone, Sticky Clay etc. From Ground Level Upto Entire Depth for 200 mm dia linear assembly complete as per items of unit estimate.( 50m Depth). Mini Tube Well

Supply & Installation of elecronically controlled, electrically actuated,diaphragm operated, chemical metering pump, wall mounting suitable for delivering up to 6 litres of chemical solution/sodium hypochlorite solution per hour under maximum delivery pressure up to 6.0 KG/cm2 and suction lift not less than 1.5 meter with accessories.

Supply of all Materials, Labours, T&P etc. and construct a New Pump House with size (3.60 m x 3.0 m) as per design and drawings, including cost of all Labour & Fittings all complete. At SUMP / PUMPHOUSE

Provide all Materials, Labour, T & P etc and construct 3.60 m Wide Entrance Gate with Gate Pillars for controlling approach to the area.

Excavation in Pipe Line Trenches: Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.

MS ERW PIPE (Rising Main)

80 MM DIA

50 MM DIA

G.I. PIPE CONFORMING TO IS : 1239(PART-1)

15 mm dia G.I Pipe

20 mm dia G.I Pipe

25 mm dia G.I Pipe

32 mm dia G.I Pipe

40 mm dia G.I Pipe

50 mm dia G.I Pipe

65 mm dia G.I Pipe

80 mm dia G.I Pipe

100 mm dia G.I Pipe

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

Supplying of Brass/G.M. Sluice Valves (Scouring Purpose)Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand.

Brass/G.M. Valve IS 778 Class-I(Scouring purpose)

32 mm dia

Supplying of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand

C.I. Air Valve (Screwed)

20 mm Diameter

Providing & Fixing D.I. D/F Non Return Valves Confirming to IS: 14846-2000 in position including all material, labourer, T&P etc complete.

D.I. D/F Non Return Valve

50 mm dia

80 mm dia

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside the tank and alluminium ladder inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator,supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.

SUMP of 65 KL

CWR of 65 KL Top Tank

CWR of 35 KL at Zone - 1 Amel

CWR of 25 KL at Zone - 2 Aam Dali

CWR of 7.5 KL at Zone - 4 Kairali

Supply of FRP coated MS Bucket Type Chlorinator of 25 litres capacity with chlorination arrangement

PIPE/CWR PROTECTION WORK

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)-GI wire 10 gauge BWG

RCC Pillar for Holding Pipe

Construction of RCC Pillars For supporting of pipes

Anchor Block

Anchor Block (Details attached as separate estimate) (Size:- 1.20 m x 1.20 x 1.20 m)

Dismantling of Road

For Pipe Laying

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately (Considering 20%)

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately (Considering 5%)

Restoration of Road

For Pipe Laying

Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size of coarse aggregate not exceding 25 mm,mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Flow Meter

Providing & Fixing Woltman type Bulk Meter inline type, flange end with Integral mounted display and all necessary fittings etc complete.

50mm Dia

65mm Dia

80mm Dia

50mm Dia

65mm Dia

80mm Dia

100mm Dia

Supply of all labour, material required for restoring of existing house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections. (Considering 10% of 2020 Households)

Interconnection of new pipe line to existing pipe line including necessary cutting, supply and Installation of required specials fittings all as per direction of Engineer-In- Charge.

Providing and making house service connections from water supply distribution GI pipe line upto water meter chamber inside the property using GI pipe including supply and fixing of electrofussion saddle ,brass ferrules elbow, ball valve etc complete with earthwork, road cutting with restoration works

Testing of Pipes (G.I ,HDPE & D.I) which includes a)Parameters(Physical & Chemical) b)Tensile Sterngth Properties