REPAIRS TO FLOOR/ROOFING I/C FALSE CEILING, BIRD PROOF NETTING AND MISC REPAIRS TO CERTAIN BUILDING IN TECH AREA AND 308 TRU AT AF STN BHUJ

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Supply & fix mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1998 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and directed by Engineer-in-Charge

Supply & fix mild steel for wind ties of size 25mm x 5mm for roof including securing bolts ,incuding cutting tops to shape as directed , drilling holes and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

Supply & fix MS framed work by fabrication such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work of water tanks etcincluding portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Supply & fix MS purpose made butt hinges conforming to Fe-290 Gde-E-165 suitable for fixing to stone/ concrete door and window frames including fabrication work etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new or previously untreated steel and iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of rid oxide primer or zinc chrome on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new or previously untreated steel and iron surfaces of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of rid oxide primer or zinc chrome on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.

Supply & fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply & fix coloured galvalume ridges,corner piece,barge board,window flashing etc, 0.50 mm thick, fixed with L or J type,special screw or cranked hook bolts in roofs , walls etc complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete any description any thickness and any positioncomplete all as specified and directed by Engineer-in-Charge.

Material & labour for 75mm thick cement concrete type C2 1:3:6 using 40mm graded aggregate as in plinth protection finished even and smooth without using extra cement, laid in bays, joints filled with sand and bitumen mixture at 1:1 ration complete all as specified and directed by Engineer-in-Charge.

Material & labour for 75 mm thick cement concrete type C-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.

Material & labour for 60 mm thick (M-25 mix) glossy rubber mould interlocking tiles conforming to IS-15658-2006 laid dry over 30 mm compacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge.

Material & labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Material & labour for 100 mm thick for PCC 1:2:4 type B2 (using 20mm graded stone aggregate) as in path/ hard standing finishing smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for 100 mm thick for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in path/ hard standing complete all as specified and directed by Engineer-in-Charge.

Forming contraction (Dummy) joints 65mm X 10mm wide, filled with sealing compound Gde 'B' for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt without damaging structure and removing the debris outside the MD land and M&L for plaster 15 mm thick on concrete surfaces in cement mortar 1:4 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to receive WPT treatment , applying a coat of bitumen primer confirming to IS - 3384-1986 @ 3% per sqm ,providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application over primed surfaces complete all as specified and as directed by Engineer-in-Charge.

Dismantling wall and ceiling boards, any thickness including cover fillets, grid work of any description complete all as specified and directed by Engineer-in-Charge. .

Material & labour for providing 12mm thick Gyp boards in ceilings fixed to ceiling sections with screws @ 300mm centre to centre and making good joints Gypsum binder including preparing the surfaces of ceiling boards and applying 2 coats of acrylic oil emulsion distemper with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofits at approxly 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50 mm and flange of 26 mm each side with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed by Engineer-in-Charge..

Material & labour for false ceiling corners with designed angular shape of size 100x100mm with POP fixed on 6mm thick fibre board with 20x20mm, 0.55mm thick galvanised sections fixed at intervals not more than 750mm complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs for false ceiling of perforated particle board/tiles 60X60 cm in size and 12mm thick fixed with nails to timber frame work or with staples on snap grid fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge..

Supply & fix 4.00 mm thick sheet figured glass pin headed type and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Taking down chowkaht or frame (without taking off shutter from frame) exc. 1.50 Sqm but n.exc. 4.00 Sqmcomplete all as specified and directed by Engineer-in-Charge.

Taking down Chowkaht or frame (without taking off shutter from frame) n.exc. 1.50 Sqm complete all as specified and directed by Engineer-in-Charge.

Supply & fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, S&F in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, S&F in the frame at site complete all as specified and directed by Engineer-in-charge.

Supply & fix 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and as directed by Engineer-in-Charge.

Supply & fix stainless steel 100mm size of hinges butt hinges, medium weight complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed by Engr-in-Charge

Supply & fix 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge

Supply & fix aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engr-in-Charge. .

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-charge. .

Material & labour for PCC 1:3:6 type C2 as in foundation, filling, and mass concrete complete all as specified and directed by Engineer-in-Charge. .

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. .

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed by Engineer-in-charge. .

Material & labour for rendering 15mm thick in CM (1:4) on block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. .

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed by Engineer-in-Charge

Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of birla white putty by finishing the surfaces even and smooth complete all as specified and directed by Engr-in-Charge

Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer complete all as specified and directed by Engr-in-Charge. .

Supply & fix in repairs bird proofing netting in hangers, storage accn etc complete all as specified bird proofing net of Co-Polymer Nylon monofilament, ultraviolet stabilized with aperture of 25mm x 25mm Machine Knotting with the dia of filament wire as 0.80mm, melting point 260 deg, tensile force to resist 23.08 Kgs as approved by GE complete all as specified and directed by Engineer-in-charge. Note:- Height of Bldgs approx 12mtr considered .

Repairing/ taking down aluminium window/doors of any description area exc 1.00Sqm n. exc 2.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, aluminium snap bidding, glazing clips and re-fixing resuring in same opening complete all as specified and directed by Engineer-in-Charge. .

Repairing/ taking down aluminium window/doors of any description area n. exc 1.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, aluminium snap bidding, glazing clips and re-fixing resuring in same opening complete all as specified and directed by Engineer-in-Charge. .

Supply & fix anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-charge. .

Supply & fix anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-charge.

Supply & fix galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs steel rolling shutters 1 mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr-in-Charge.

zotabrothers

BHAVANI PROVISION STORES