PROVN OF GUARD ROOM WITH ATT TOILET AND BATHROOM, CHAIN LINK FENCE AT KHARI ROHAR AND SPECIAL REPAIRS TO DRAINAGE AT MIL STN BHUJ UNDER GE ARMY BHUJ

Amount

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slope & gradient and n.exc 10sqm on plan and n 'exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed

Excavation in trenches n.exc. 1.5m wide and exc 1.5 m & n exc 3m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slope & gradient and n.exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed

Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),200 mm dia pipe of any description and in any position set and jointed in cement mortar complete all as specified and directed.

M&L for concrete bed to drain pipes in cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under, and haunching against the side of the pipes after they are laid tested for pipes of 200mm dia complete all as specified and directed

S&F jointing and testing for reinforced concrete drain pipes, 200mm bore, class NP-2, laid and jointed with collar in CM (1:1) complete all as directed.

Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as directed.

M&L for precast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete Type B-1, 1:5:10 (20mm graded aggregate and 12.50 mm in the ratio complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete/ fair surfaces of block masonry, finished even and smooth without using extra cement with and including mixing water proofing compound as per manufacturers instructions complete all as specified and as directed by Engr-in-Charge. Water proofing compound shall be measured and paid for separately under appropriate item of Sch "A' as supply only on requirement basis

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping exposed surfaces finished even and smooth using extra cement including necessary form work complete all as specified and directed by Engr-in-Charge.

Demolition of RCC drain covers of any description and in any position complete all as directed by Engr-in-Charge

M&L pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) for drain covers including placing in position and set in cement mortar (1:4) complete all as specified and directed.

M&L for mild steel TMT 10mm dia and over as in reinforcement cut to length bent to shape required including cranking etc and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-Charge

Returning ,filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed by Engr-in-Charge

Removing excavated soil/ materials to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as directed by Engr-in-Charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Demolition of concrete (unreinforced) of any description and in any position not specifically provided for complete all as directed by Engr-in-Charge

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation of for drain , mass concrete etc. complete all as directed by Engr-in-Charge

Surface excavation n.exc 15 cm deep & getting out in soft / loose soil complete all as specified & as directed.

Removing excavated soil material exc. 250 m but n exc. 500 m and depositing where directed

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) means over areas n. exc 1.5m depth (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) means over areas exc 1.5m depth but n. exc. 3.0m (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

M&L anti-termite treatment treating the backfill in contact with foundation at the rate of 7.5/5.0 litres of emulsion per square metre of vertical both side surface, top and bottom suface (Area of the sub structure in contact with backfill to be measured) complete all as specified & as directed.

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed.

M&L TMT bars 10mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality, and including 10mm dia in stirrups, spacers and binders all as specified and directed

M&L for RCC (design mix) M-30 for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, all as specified and directed.

M&L for RCC (design mix) M-30 for columns, pillars, pierrs, posts & struts etc all as specified and directed.

M&L for RCC (design mix) M-30 for beams cantilevers bressumers, lintels over 1.5m span etc all as specified and directed.

M&L for RCC (design mix) M-30 for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc all as specified and directed.

M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter all as specified & all as directed.

M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape all as specified & as directed.

M&L flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc all as specified and directed.

M&L,flat rough finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc all as specified & all as directed

M&L cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base.

M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4.

filling under floors or in foundations including watering and consolidation with excavated earth all as specified and directed

M&L rendering 5 mm thick in CM 1:4 on ceiling surface, surface finsihed even and smooth without using extra cement.

M&L preparation of newly plastered ceiling surface and applying three coat of white/colour wash all as specified and directed.

Supply only water proofing compound all as specified and directed.

M&L rendering 10mm thick in CM 1:4 on brick work or concrete surface, surface finsihed even and smooth without using extra cement.

M & L for two coats of oil bound distemper over a coat of alkali resistant primer incl preparation of newly plastered surface complete all as specified and directed.

M & L 15mm thick cement plaster, One Coat of 10mm thk in C.M. (1:6) & Second coat of 5mm Thick in CM (1:4) even & smooth without Using Extra Cement

M & L for preparation of newly plastered wall surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L glazed ceramic tiles in floor surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match and Including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6.

Ditto but on vertical surface such as skirtings, dados and risers to steps etc. and Including backing coat of mortar 10mm thick in CM 1:4

M&L Non skid ceramic tiles 7 to 8mm thick,(square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles. and Including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6.

Ditto but on vertical surface such as skirtings, dados and risers to steps etc. and Including backing coat of mortar 10mm thick in CM 1:4

Pressed steel frames for doors 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.

Preparation of new wooden surface of any description and applying two coat of synthetic enamel paint over a coat of pink primer over 10cm width or girth.

S & F of Factory made wire gauzed PVC door shutter 30 mm thick, i.e. panel will be of wire gauzed in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet and PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 Deg) used instead of exposed portion of PVC sheet beading. suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S & F of 5.5mm thick Sheet glass, ordinary quality and glazing sheet glass is ground or obscured or frosted, on one side with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification.

S & F of aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium handles, cast type, anodised of 150 mm size.

S&F Butt hinge, Stainless steel of 100 mm size

S&F mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white,including trap and connection to drain and flushing pipe and including flushing cistern including seat cover with flat bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan complete.

S&F vitreous china WHB white flat black size 550 x 400mm including brass CP 15mm dia pillar tap, 32mm dia waste pipe with CP waste coupling bracket etc in repair.

S & F for 500 ltrs capacity rotational moulded polyethelene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F in repairs 25 mm bore ball brass valves,high pressure,with polythene float and flunut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified.

Supply and fixing of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed.

Supply and fixing of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed.

Supply and fixing of PVC (SWR) junction single, (single T) equal or unequal provided with access door suitable for 110mm bore PVC pipes complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends any radius suitable for 110mm bore PVC pipes with access door complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends any radius suitable for 75mm bore PVC pipes with access door complete all as specified and as directed.

Supply and fixing of PVC (SWR) vent cowl for 110mm bore PVC pipes complete all as specified and as directed.

Supply and fixing of PVC (SWR) WC connector bent type for 110mm bore PVC pipes complete all as specified and as directed.

Supply and fixing of PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed as specified.

S & F in repairs to Harrison rails (Curtain Rails / Rod), anodised aluminium alloy, powder coated with fixing brackets, stops, rollers etc rate inclusive of brackets as per requirement complete all as specified and directed.

M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with water proofing compound @3% by weight of cement & laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint 0.2 litre /sqm as per the makes approved by the Engr-in-Charge.

M&L Hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified & as directed.

M & L for modular fly ash bricks in Cement mortar 1:6, straight or curved on plan exc 6m mean radius, built in complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in coping and finishing the exposed surfaces even and smooth by using extra cement including necessary form work complete all as specified and directed.

M & L for rendering 10 mm thick in CM 1:3 on concrete / fair surfaces of block masonary, finished even and smooth without using extra cement with and including mixing water proofing compound as per manufactureres instructions complete all as specified and directed. Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A' as supply only.

Supply only liquid water proofing compound (ISI Mark) complete all as specified and directed.

Supplying, fixing, jointing and testing reinforced concrete drain pipes 150 mm bore, class NP3, laid and jointed with collar in CM 1:1 complete all as specified and directed.

M & L for concrete bed to drain pipes in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) including packing under and hauching against the side of the pipes after they are laid tested for pipes of 150 mm dia complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.50mm graded aggregate) as in benching of surface channels/manholes including fair finishes of surfaces chamfering, throating and weathering and necessary form work complete as specified and directed.

M & L for precast cement concrete manholes covers in RCC 1:2:4 Type B-1 (using 20 mm graded stone aggregates) with duly engraved "MES" marking and placing in position and set in CM 1:4 complete all as specified and directed.

M & L for On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 User complete all as specified and directed.

M & L for Soakage wells having size 2.4m dia X 3.0m effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as directed and specified

M & L for 100 mm thick PCC 1:3:6 type C-2 (40 mm graded stone aggregate) as in sub base and all other similar works complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete inter locking paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Preparation of new or previously untreated surfaces of concrete and concrete based materials of any description and in any position over 10 cm width or girth and Material and labour for applying one coat of synthetic enamel paint on concrete surfaces complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes ) each n.exc 0.5 cum, getting out in hard dense soil including returning, filling in and ramming earth or broken rubble mixed with earth aroung, in layers not exceeding 25cm, watering and remooving surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

S & F of mild steel works posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 complete all as specified and directed.

M & L for preparing new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Supply only, PVC Coated chain link fencing having wire outer dia 5mm and wire mesh size of 50mm x 50mm complete all as specicfied and directed.

Fixing only chain link fencing incliding fline wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S & F of 10 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt & n.exc 5 cm long complete all as specified & as directed.

Supply only Mild Steel round Bar 10 mm dia Grade Fe-290 (Gde E-165) to be fixed as line wires in Chain Link Fencing complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description not exceeding 10cm in width or grith and applying two coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.

M & L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M & L Point wiring for one light/fan point controlled by one modular switch, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC conduit concealed wiring with all accessories/ fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surfaces of walls, panels, floors etc. complete all as specified and as directed

M & L Point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC conduit concealed wiring with all accessories /fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surface of walls, panels, floors etc. complete all as specified and as directed

All as per Sl item No 1 above but for one socket outlet point 5 amps on independent board controlled by one, one way switch.

All as per Sl item No 1 above but for one socket outlet point on the same baord with other switches.

S & F Modular switch 1 way 6A, 1 module of sigle pole, one way ,complete all as specified and as directed

S&F Modular switch 1 way 16A, 1 module of single pole, complete all as specified and as directed

S&F Modular switch socket outlet 3 pin 5 Amp' flush type controlled by one switch , complete all as specified and directed

S&F Modular switch socket outlet 3 pin, 15Amp, flush type, complete all as specified and as directed

Ceiling rose, Pilot 3 Plate ceiling rose 6A ,complete all as specified and as directed

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fittings complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed

Supply & fix ceilign fan complete with three blade, down rod, electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated all as specified & directed

S&F MCB DB epoxy powder coated , SPN 8 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed

Supply & fix MCB SPN capacity 32 amp, 'C' series , complete all as specified and directed

MCB SP 6 to 32 Amps, 240 Volts of 'B' series to be housed in DBs and suitable size cable lugs to be fixed with MCBs as in replacment, complete all as specified and directed

M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.

Supply, layingand testing XLPE insulated, armoured, heavy duty electric cable with aluminium conductor 1100 volts of size 10 Sqmm 2 core with stranded aluminium conductor complete all as specified and directed by Engr-in-charge of following sizes. (Note :- Excavation & earth work will be measured and paid separately under respective item).

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft loose soil.

M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type 1, flat as per size 250mm x 150mm x 40mm for LT cable and laid dry in trenches over underground cables complete all as specified and directed

S & F in GI pipe, light grade, of size 25 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection .

Supply and fixing UPVC pipe 50 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed

Supply and fixing UPVC pipe 25 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed

Supply and fix ball valve 25 mm dia including all fittings all as specfied and directed

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Gayatri Construction Co (BID ID -3460811)

Squad 7 Projects and Services Pvt Ltd (BID ID -3456094)