COMPREHENSIVE MAINT OF CERTAIN SMQs AT AF STN BHUJ

Amount

Material & labour for preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying two coat of white wash, complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of old treated surfaces of ceiling including brooming down, scrapping down smoke soots etc. and appying two coat of white wash, complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of old treated surfaces of wall surfaces and applying one coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of old treated surfaces of wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and directed by Engr-in-Charge.

Material & labour for applying 1-2mm thick wall care putty on wall surfaces complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over incl primer complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of old or previously untreated concrete or PCC block masonry external surfaces and applying one coat of exterior emulsion paint (in camouflage pattern as approved by the GE) complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Material & labour for writing letter or figures ( Block, roman , Italic or Indain ) n,exc 30 cm high using synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Material & labour for writing stops, commas , short lines, dashes , hypens , brackets etc using synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description complete all as specified and directed by Engr-in-Charge.

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed by Engr-in-Charge.

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering 15mm thick in two layers first coat 10mm thick in CM 1:4 and second coat 5mm thick in CM 1:4 with wate proofing compound @3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

Material & labour for preparation new plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coa of water base primer complete all as specified and directed by Engr-in-Charge.

Supply only water proofing compound (ISI Marked) complete all as specified and directed by Engr-in-Charge.

Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15cm thick (below or above ground level) and removing rubbish off the MD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc complete all as specified and directed by Engr-in-Charge.

Material & labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Material & labour for glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10 mm thick plaster in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Material & labour for in repairs for 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engr-in-Charge.

Material & labour for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engineer-in-charge.

Material & labour for pressed steel frames for doors size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed by Engineer-in-charge.

Material & labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides), Fe-410- W(Gde-E-250) quality- B and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

Running welding in repairs, Thickness of metal to be welded n. exc 6mm complete all as specified and directed by Engineer-in-Charge.

Welding in repairs,n. exc 2.5cm in length and Thickness of metal to be welded, n. exc 6mm thick. complete all as specified and directed by Engineer-in-Charge.

Supply & fix 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge.

Supply & fix 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified and directed by Engineer-in-charge.

Supply & fix stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

Supply & fix in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-charge.

Supply & fix 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-charge.

Supply & fix 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Supply & fix 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size complete all as specified and directed by Engineer-in-Charge.

Supply & fix floor door stopper of brass body and tongue with hard drawn steel spring, overall length of cover plate 150mm and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer in Charge.

Supply & fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed by Engineer-in-Charge.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engineer-in-Charge.

Material & labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) complete all as specified and directed by Engr-in-Charge. Note :- Aluminium grill fixed under above item shall be measured and paid separately

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engr-in-Charge.

Repairing/ taking down aluminium window/doors of any description area exc 1.00Sqm n. Exc 2.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, aluminium snap bidding, glazing clips and re-fixing resuring in same opening complete all as specified and directed by Engr-in-Charge.

Resecuring without taking down Chowkhats or frames not exc. 1.5 sq. m each complete all as specified and directed by Engr-in-Charge.

All as per Item 52.00 above but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.

Resecuring without taking downChowkhats or frames exc 1.5 sq. M but n exc 4 sq. m each complete all as specified and directed by Engr-in-Charge.

All as per Item 54.00 above but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

Resecuring or easing & adjusting without taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed by Engr-in-Charge.

Supply & fix 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply & fix 18mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply & fix 12mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply & fix 05mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC coated basket for kitchen drawers of required size n. exc 0.5 sqm and including sliding channels complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs citreous china wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

Supply & fix swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed by Engr-in-Charge.

Supply & fix shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs two way angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs for vitrious china squattin pan ,orrissa paattern size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete, including supply and fixing of seat cover complete all as specified and directed by Engr-in-Charge.

Supply & fix grating square 150 mm size of but with waste hole of PTMT. (Minimum weight 100gms) complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, flaot and handle including brackets of 10 Ltr capacity complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs for brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Material & labour for in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed by Engr-in-Charge.

Material & labour for in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE and complete all as specified and directed by Engineer-in-Charge

Supply & fix towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 750 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 1000 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engr-in-Charge.

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks complete all as specified and directed by Engr-in-Charge.

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 500 liters and n.exc. 1000 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks complete all as specified and directed by Engineer-in-charge.

Supply & fix 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs tank top cover (lid) white/black with locking arrangement complete of make : Sintex suitable for 500 ltr capacitym complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs tank top cover (lid) white/black with locking arrangement complete of make : Sintex suitable for 750 ltr capacitym complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs tank top cover (lid) white/black with locking arrangement complete of make : Sintex suitable for 1000 ltr capacitym complete all as specified and directed by Engineer-in-Charge.

Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor complete all as specified and directed by Engr-in-Charge. Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge. of following sizes: (SDR-13.5)

20mm bore of pipe

25mm bore of pipe

Dismantling of cast iron,PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required complete all as specified and directed by Engr-in-Charge following bore of pipe

100/110mm dia of pipes

75mm dia of pipe

Supply & fix UPVC ultra drain, pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engr-in-Charge of following size

100/110mm dia of pipes

75mm dia of pipe

Supply & fix of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engr-in-Charge of following sizes :-

100/110mm dia of pipes

75mm dia of pipe

Supply & fix in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and directed by Engr-in-Charge.

Material & labour for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Supply & fix of UPVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes complete all as specified and directed by Engr-in-Charge.

Supply & fix of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs 20/22mm dia fancy type PVC coated best quality drophery rods for curtains fixed to walls with screws including brackets,clamps, bracket ,end ball , rounded block (coated with brown/cherry/golden colour best quality as of approved pattern and shade complete approved by GE complete all as specified and directed by Engr-in-Charge. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the rubbish from the work site complete all as specified and directed by Engr-in-Charge.

Material & labour for preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor complete all as specified and directed by Engineer-in-Charge. (IWPC will be paid separately).

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed by Engr-in-Charge.

Material & labour for PCC type C2 1:3:6 (using 12.50 mm graded stone aggregate) as in sunken slab filling complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair GI spouts of 40 mm dia pipe , approxly 700mm long in sunken floors including necessary cutting , chipping of walls and making good with PCC 1:2:4 type B0 or cement mortar 1:3 with WPC complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed by Engineer-in-Charge.

BHAVANI PROVISION STORES (BID ID -3339046)

Gayatri Construction Co (BID ID -3331900)