PROVISION OF SEWAGE NETWORK LINES AND CONNECTED CIVIL AND EM WORKS INCLUDING SEWAGE TREATMENT PLANT AT BHUJ

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 32

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATIONS" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34

Lump sum price worked out by the contractor for "ROAD & PATH" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36

Lump sum price worked out by the contractor for "MANHOLES" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 39

Lump sum price worked out by the contractor for "FENCING, COMPOUND WALL & GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Rs. B/F from Sl page No. 41

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45

Lump sum price worked out by the contractor for "ELECTRO-MECHANICAL EQUIPMENT FOR 2 & 0.2 MLD STP" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46

Sch 'A' PART-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid under Sch "A" Part-II "SITE CLEARANCE, EXCAVATION & EARTHWORK"

INTERNAL WATER SUPPLY S&F of 2 way bib cock 15mm dia complete all as specified and directed.

S&F Angular stop cock quarter turn (wall mount) with 20 mm diameter made of brass complete all as specified and directed.

S&F for Stainless steel concealed stop cock, Regular body with adjustable wall flange, size 20mm dia complete all as specified and directed.

S&F Florentine Pillar cock with quarter turn of brass, knob controlled complete all as specified and directed.

S&F Health faucet (ABS body) with 01 meter long PVC tube & wall hook complete all as specified and directed.

INTERNAL ELECTRIFICATION S&F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver with not less than 100 lumens per watt etc complete with all accessories internally pre-wired including connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F decorative mirror type LED tube light fitting 1x10 watt including LED tubular lamp with IP20 protection, inbuilt driver, with not less than 100 lumens per watt, etc complete with all accessories internally pre-wired including connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 40mm bore light grade , 1.5 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed.

ROAD & PATH M & L 150 mm thick (compacted thickness) WMM in two layers each of 75 mm thick (each layer to be rolled and consolidated separately) confirming to the grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanically means & rolled by using 8-10 ton vibrator power rolled over compacted surface of soling as specified in clause 406.3.5 of MORT&H specification complete all as specified and directed.

M&L for preparing bituminous surface of road and applying road marking paint 2.5 mm thick and width n exc. 15 cm with hot applied thermoplastic road marking paint like such as stop lines, dashes, arrows etc of approved colour conforming to BS 3262-1989 with 20% glass beads (intermixed) spread and laid by automatic mechanical machine engine at approx. temperature of 160 degree celcius with special applicator machine all as per manufacturer's instruction complete all as directed

FACTORY MADE PRE-CAST REINFORCED MANHOLES: - S & F Factory made Pre-cast reinforced cement concrete Minimum M-35 grade design mix as in Circular Manholes of 1200 mm and 1500 mm dia, comprising of various componants as per IS-17725-2022 i.e base Slab, Base Riser, Riser Unit and Cone Section, etc. including fixing of DWCPE pipes at inlet and out as per standard enginering practice, S & F standard PVC encapsulated rungs at 300 c/c all as specified and shown on drawing. Notes: - 1. Reinforcement measured and paid separately under sch "A" Part VI. 2. Excavation and earthwork shall be measured and paid separately under sch "A" Part-II.

SEWAGE NETWORK M & L for DWCPE pipe (ISI Marked) of class SN8 complete laid in trenches, for sewer network, laid on and including the fine screened soil obtained from excavation, of layer of 25 cm. loose thickness, at any depth fixed and jointed with and inlcluding integral socket or coupler and EPDM sealing ring and tested complete all as specified in IS 16098:2013 complete all as specified and as directed for following size of pipes.:-

150 mm dia pipe

200 mm dia pipe

250 mm dia pipe

300 mm dia pipe

400 mm dia pipe

500 mm dia pipe

NOTES FOR ITEM NO 24.00 TO 24.06:- (i) Inner & outer dia shall be as per IS code. (ii) Stiffness class of the pipe shall be of SN8.(iii). The pipes shall be laid on the fine screened soil obtained from excavation, of layer of 25 cm. loose thickness. The rates quoted shall be inclusive of returning filling of fine screend soil below the pipes. The soil obtained from excavation shall be screened of size as directed by Engineer-in-charge, to avoid any damage to the pipes. Returning filling of the excavation shall be done carefully to ensure safety of the pipes.(iv) All Excavtion and earthwork, (except refilling of screened soil below pipes obtained from excavation), shall be measured and paid separately.

EXTERNAL ELECTRIFICATION Supply, installation, commissioning and testing of company make Automatic Power Factor Correction (APFC) Panel for 3 Phase, 415 V & 50 Hz system of capacity 30 KVAR in 6 steps ( 5 KVAR x 1 Nos fixed compensation + 5 KVAR x 5 Nos complete with relays, capacitor banks for automatic operation to power factor above 0.95. The panel should be complete with followings:-

TP air break contacts of capacitor contacts of duty with suitable switchgear, MPP heavy duty shunt capacitor impregnated, having rated voltage of 440 V type with internal electrical switch gear each element as per IS 13340-1993/IS 13341-1992, IEC 60831 Part I & 2 of outdoor type double door (KIOSK type) complete with interconnections with suitable size of copper wiring, PVC insulated unarmoured cable and PVC sheath etc as required. The panel shall be made out of 3.15mm thick CRCA sheet powder coated with angle frame of size 50X50X6 mm cubical type including interconnection wiring, indicating lamps etc confirming to IP 42 specifications including grounding of panel as per electrical standards, electrical connections shall be made by using proper thimbles/lugs, cable gland complete all as specified and directed by Engineer-in-charge.

OUTGOING: (a) Accessories for 5 KVAR fixed compensation capacitor bank - MCB, TP, 10 Amp, 10 KA, D curve. (b) Accessories for 5 KVAR capacitor bank - capacitor duty contactor (AC6b) 5 KVAR with damping resistors which limit xinrush current, 440 volt, 3 ph, 50 Hz, coil-220 lac & MCB TP 10 Amp, 10 KA, D curve. Note:- (a) Ventilating fans of required size to dissipate the heat liberated by capacitor units complete with automatic switching ON and OFF of fans depending upon the temperature of panel, 230 V AC, 2650 RPM, 160 Cum/h, flying leads. Panel shall have silicon based fire/heat resistance coating fire retarding DMC/SMC filling for the opening around the busbar near to the sectional barriers and door interlocking for all compartments - 01 lot. All Accessories pre wired with suitable size copper conductor cable insulated with fibber glass insulation to with stand (b) high temperature, housed in cubical panel (CPRI approved) made out of 3.15 mm thick MS sheet factory made duly powder coated front and rear door open able with locking arrangement complete with foundation as required or recommended by manufacturer.

S&F cable path indicator made of RCC (size 0.2 m * 0.1 m * 0.75 m hight) 1 : 2 : 4 type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia TMT bars 100 mm c/c horizontally vertically , Voltage & Cable size mentioned in bold letters painted with brown paint & black ground with two coats of yellow paint in foundation PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregated of size 0.3 mtr * 0.2 mtr * 0. mtr including necessary excavation & earth work removal compete all as specified and directed.

M&L for sand cushioning to underground cable screened, 8 cm below the cable and 15 cm above the cable including levelling and consolidation complete all as specified and directed. Note : Thickness of the sand will be measured after punning down.

ELECTRO-MECHANICAL EQUIPMENTS : - S & F SS Manual coarse screen of 2 m x 6.5 m capacity with all necessary fittings for screen channel clear spacing of 10 mm between bars complete as all specified and directed

S & F Non clog vertical submersible pumps with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete of 100 Cum/Hr flow rate capacity pump at 13 mtr head for Wet well complete as all specified and directed. Make: - KSB/Kirloskar/WiloMather/Rotomac Industries Pvt. ltd.

Supply, laying, connecting, jointing and testing ductile iron pressure pipe, ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, Class K-7 with socket and with cement mortar lining inside & finishing layer of bituminous paint on outside the pipe but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed for following size of pipe:-

200 mm dia pipe

150 mm dia pipe

100 mm dia pipe

Supply, installation, connecting and testing sluice valve, non rising type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed for following size:-

250 mm dia

100 mm dia

50 mm dia.

S & F cast iron reflux valve with by-pass Arrangement, complete as all specified and directed for following size:-

250 mm dia

100 mm dia

50 mm dia.

SITC of Float type Level switch (vertical) 220/230/250 Volts, IP 67 Float Switch Sensor for Water Level Controller with required length of Wire complete as all specified and directed

SITC of pressure gauge range 0 -2.5 bar, 100 mm dia dial gauge glycrine filled, MOC Steel, bottom connection, 0.5' connection size for delivery line on pipe complete as all specified and directed.

Supply & Fix of SS-304 screen of 0.90 m width x 2 m height with all necessary fittings for screen channel clear spacing of 6 mm between bars complete as all specified and directed

S & F Non clog vertical submersible pumps set of capacity suitable for not less than 83.5 Cum/Hr flow rate at 10 mtr head with chrome steel impeller and cutter, to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete for Equilization tank complete as all specified and directed.

SITC Twin-Lobe Roots Type, Metallic blades, Air Blower heavy duty , 750 cum/hr flow at 0.4kg/cm2 not less than 25 HP electric motor for Blower room complete as all specified and directed. Make: - TMVT/Akarsh/Everest/Atlas Copco.

SITC of Fine Bubble EPDM Diffuser Dia 90mm x 1000 mm diffuser with 1 inch Air inlet connection and SS nipple EPDM membranes duly clamped all as specified for MBBR tank complete as all specified and directed. Make: - Scogen/EDI/Rehav/EQV/ Enviro water solution.

SITC of Coase Bubble Wide band Diffusers Dia 90mm x 800 mm diffuser with 3/4 inch Air inlet connection and SS nipple all as specified for Equalization tank complete as all specified and directed. Make: - Scogen/EDI/Rehav/EQV/ Enviro water solution.

SITC of MBBR filter media of size as per OEM design and surface area 500 sqm/cum, loose media in bags complete all as specified and directed. Make: - Cool dvck/MM Aqua/EQV

PVC COOL Tubes CD-TS120 (Loose Leaves), Surface Area: 11 m2/m3 at 60 deg Angle inclination; vertical ht 750 mm complete as all specified and directed. Make: - Cool dvck/MM Aqua/EQV

SITC of 2.75 mtr dia & 2 m HOS (High Operating pressure) Sand media filter (PSF) complete MOC of vessel FRP with sand media, multiport valve, Stand, etc of capacity for 83.5 cum/hr flow capacity near chlorine contact tank complete all as specified with necessary fitting and piping complete as all specified and directed. Make: - ION Exchange, Optimus, Pentair.

SITC of 2.75 mtr dia & 2 m HOS (High Operating Pressure ) ,ACF media filter complete MOC of vessel FRP with ACTIVATED CARBON FILTER media, multiport valve, Stand etc for 83.5 cum/hr flow capacity near chlorine contact tank complete all as specified with necessary fittings and piping complete as all specified and directed. Make: - ION Exchange, Optimus, Pentair.

SITC of centrifugal pumping sets with Stainless steel impeller, electric driven, copper wound Motor of suitable capacity, complete including PCC foundation. of Filter feed pump for Sludge transfer pump of capacity 42 cum/hr and 20 mtr head near Chlorine contact tank complete as all specified and directed.

SITC of centrifugal pumping sets with Stainless steel impeller, electric driven, copper wound Motor of suitable capacity, complete including PCC foundation. of Filter feed pump for Sludge transfer pump of capacity 12 cum/hr and 10 mtr head near sludge tank complete as all specified and directed.

Supply and fix Sliding gate valve, of size 200 x 200 mm. M.S BODY, GATE-SS 304 of following sizes all as specified.

All se per item No. 46 above but of size 250 x 200 mm.

All se per item No. 46 above but of size 300 x 300 mm.

SITC of Solenoid Operated Electronic Dosing Pump Chlorine dosing pump not less than 5 LPH, 120 SPM, With Electric Cable, Tubing, Strainer cum foot valve & Anti Syphon Valve complete as all specified and directed. Make :- Grunfos/Pritine water

SITC of Solenoid Operated Electronic Dosing Pump Poly dosing pump not less than 5 LPH, 120 SPM, With Electric Cable, Tubing, Strainer cum foot valve & Anti Syphon Valve complete as all specified and directed.

SITC of Digital Flow transmitter Flanged & Screwed connection Supply -230 V * 5 Amp Output 4-20-uA Housing: Weather. proof for nominal dia 100 & 150 mm Protection Class for Sensor : IP 65 complete as all specified and directed. Make: - SBEN Pune/EQV

SITC of DO Analyzer DIGITAL DO PROBE (With Breakthrough Luminescent Technology), ASSY, PROBE, LDO MODEL 2, 10M HACH P/N.: 9020000, SC 200 CONTROLLER, 1 Channel AC-DC, DIGITAL, HACH MAKE P/N.: LXV404.99.00502 complete as all specified and directed.

Supply and lay UPVC Pipes (SCH-40) including Specials i.e. fittings etc for OD 150 mm dia complete as all specified and directed.

SITC of filter press with Electro Mechanical Plate Shifting Device Plates type Filter Press of SIZES 1200 X 1200 mm for 7 bar Filtration Pressure with a hydraulic closing devices.Moc of Filter Element : Polypropylene Cast Iron, SS 304, SS 316 Liquid Holding capacity - 55 Lit complete as all specified and directed. Make: - Envicare/AIR TECH

S&F for Mechanical Aggitator for suitable RPM with gear box assembly and motor for poly dosing tank complete as all specified and directed.

SITC of Electrical Panel with 3 pole Power contactor type MNX with copper bushbar Density 0.8 A/sqmm, Fabrication : Pre Treatment :7 Tank Process Painting : Powder Coated with Siemens grey (RAL-7032) Type : Free Floor resting , Fix type, Single front , Semi Compartmentalized Cable Entry complete as all specified and directed :TOP ( detachable Gland plates).

SITC of PVC sheathed ,armoured copper conductor Cable of size 4Cx 2.5 Sq.MM area for total Plant in and including PVC conduit complete as all specified and directed.

S & F LED Solar street light of 35 watt, including 12.8 V, 40 Ah, life of battery, MPPT controller along with GI Octagonal Pole 7 m Length including GI bracket, excavation and earthwork and PCC concrete complete all as specified.

SITC of 35 W LED security light including GI pipe mediun grade Bracket with 1 M projection, 40 mm dia (Pipe), with junction box, including MS plate, nut and bolts complete as all specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of strata, PCC (1:3:6) Type C-0 in chamber, precast RCC 75 mm thick in cement concrete (1:2:4) type B-0 Cover, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20 mm bore GI pipe medium grade watering pipe, lugs, 40 mm bore GI pipe medium grade protection pipe up to 7.5 m.complete as all specified and directed.

M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of strata, PCC (1:3:6) Type C-0 in chamber, precast RCC 75 mm thick in cement concrete (1:2:4) type B-0 Cover, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. GI earth wire and protection pipe beyond 7.5 m shall be measured and paid for separately.

DG SET Supply and installation and commissioning of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel for automatic starting on main failure, control panel having meter and sound proof canopy as per latest CPCB norms and foundation etc. of capacity not less than 160 KVA with AMF panel with following specifications''

The engine shall consists of following specification :- The scope of supply includes:- Electrical starter motor 12V DC, Battery charging alternator- Turbo charger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection (i) Radiator cooling, with turbo charged after cooling (ii) CRDI Fuel injection SYSTEM. (iii) Electronic Governor (iv) Dual spin-on fuel filter (v) Spin-on full flow lub oil filter (vi) Residential silencer (vii) Dry type air cleaner (viii) Recovery bottle (ix) Cut-off coil with safeties for LLOP/HWT (x) Flywheel and flywheel housing to suit single bearing alternator

(i) Alternator:- suitable for operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire system, conforming to BS 5000 / IS 4722. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features:- -+ 1 % Voltage regulation (max.) in static conditions -IP: 23 Enclosure -Permissible overload of 10% for one hour in 12 hours of operation as per standards (ii) Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. The steel shall be TESO / SAIL or equivalent make (iii) Control panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for a weather-proof, long lasting finish. 1) Read all genset inputs and controls gensets 2) controls engine speed ( Speed governing) 3) Supports Auto-Mains Failure (AMF) functions and Manual control Panel.

The control panel consists of following parts: -Standard engine instrumentation -Multi function meter which measures: 1) Individual phase current (Amps) 2) Phase voltages (V) 3) Generator output frequency (Hz) 4) Engine water temperature (Deg.C) 5) Lube oil pressure (kg/cm2) and equipped with hour counter -MCCB of suitable rating -Key switch -Push button (Starter) -LED: Battery charging alternator fail indication -Current transformers -Instrument fuses duly wired and ferruled Acoustic enclosure: The acoustic enclosure is made of 1.6/ 2 mm thick CRCA sheets and structural/ sheet metal base frame duly painted.

All as per item No 60.00 to 60.05 here-in-before but of capacity not less than 30 KVA complete all as specified and directed

Providing and Fixing, treated water supply lines, standard length ISI mark, IS 4984, HDPE Pipes suitable for potable water for both mainline and branch line including fittings, jointing, for gardening network complete as all specified and directed.

40 mm (OD) PN6 pipe

75 mm (OD) PN6 pipe

110 mm (OD) PN6 pipe

125 mm (OD) PN6 pipe

250 mm (OD) PN6 pipe

S&F PP-R Ball valves (brass insert) of 40 mm as per requirement of the site complete as all specified and directed, treated water pipe line

M&L for Construction of brick Masonary valve chamber of size 600 X600 X 750 mm (Internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , one brick thick walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in CM (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in any type of strata, 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

SITC of Non clog vertical submersible pumps set for discharge of 12 cum/hr @ 26 mtr head with chrome steel impeller and cutter, to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance to pump treated water from earthan pond to 1 Lakh ltr treated water tank complete as all specified and directed

SITC of Non clog vertical submersible pumps set for discharge of 100 cum/hr @ 29 mtr head with chrome steel impeller and cutter, to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance to pump treated water from earthan pond to 1 Lakh ltr treated water tank complete as all specified and directed

S&F Cast iron butterfly valve conforming to IS 13095, for the outlet connection from the 1 Lakh litre tank 150 mm dia complete as all specified and directed

SITC of cool float CD BF 22, PP with UV stabilized. Dia 22mm, ht 20mm, surface area 500m2/m3, Loose media in bags complete all as specified and as directed

S&F Cast iron Non return Valve (NRV) 100 mm dia complete as all specified and directed.

Providing, constructing, hydraulic testing, commissioning and giving satisfactory trials of, STP consisting of packaged type compact STP of MBBR based compact Packaged type 200 KLD STP system including all Electromechanical items as specified in drawing No. CEJZ/E&M-D/44/2022 i.e Fine bar Screen chamber(manual) Raw sewer Pump (2 Nos), Feed Pumps(2 No), Moving Bed Bio Reactor(s) with plastic media (of appropriate density, size and quantity to keep very high MLSS > 15,000 mg/lit), Air Blowers for MBBR and airation grid, Tube Settler assembly, Sludge handling unit of appropriate size, Chlorine Dozing System, Poly dosing system, Filter Feed tank, with tertiary treatment it also includes Filter Feed Pumps, Dual Media Filter, Activated Carbon Filter, Foundation for all E/M equipments, Associated piping work with required valves, gates, drains, pathways, Electrical control Panel with interconnecting cable, spare parts etc. as required for satisfactory operation, complete as turnkey job with all involved electrical, digital and mechanical works as per detailed specifications for electrical and mechanical components complete all as specified and directed.

ARBORICULTURE Digging of pit n.exc 0.25 cum in any type of soil incl removal and filling back to pit with suitable growing media like red earth by treating with farm yead manure in the ratio (3:1) fertilizers and pesticides (i.e Bevation and neem cake BHC 10% linson dust. Thimment or phorate, manures super and vermicompost) and making up the trench area to proper level including supply and planting healthy tree plants of following species of height not less than 3 ft as approved by GE etc as directed by Engr-in-Charge.

Neem (Azadirachta indica),

Mango

Chicoo

Jamun

S & F Mild steel Tree Guard 1.50 Mtrs high above GL , and 50 cm. below GL, with MS wire mesh of size 78 x 37 mm and 2 mm dia of wire and MS angle iron 20 x 20 x 3 mm verticals (3 Nos) & MS flats 14 x 3 mm around the tree guard (3 Nos top , middle and bottom) equally spaced and embedded vertical angles in PCC 1: 3:6 Type B-I including excavation in post holes and removal of excavated material to a n.exc 50 mtr and applying two coats of synthetic enamel paint including one coat of red oxide primer to tree guard and complete all as specified and directed.

Phase - III (a) (M&O FOR packaged type STP): - This Phase will start immidiately after completion of Ph-I. Manning and operation of STP for two years during defects liability period in two shifts per day 0600 to 1400 hours and 1400 to 2200 hours having minimum one STP opeartor having past experience of such work, in each shift for sewage treatment plant of capacity 0.2 MLD consisting of the equipment like Submersible sewage pump non clog type 3 Phase, Compressor motor 3 Phase, Filter of 2 no's , filter pump, Equilization Tank feed motor and other connected items like valves etc and maintaing of log book complete all as specified and directed.

Phase - III (b) : - All as per item No. 73 above but Manning and opertion for third year.This Phase will start immidiately after completion of Ph-III (a).

Phase - III (c) : - All as per item No. 73 above but Manning and opertion for fourth year.This Phase will start immidiately after completion of Ph-III (b).

Phase - III (d) : - All as per item No. 73 above but Manning and opertion for fifth year.This Phase will start immidiately after completion of Ph-III (c).

Phase - IV (a) : -(M&O FOR 2 MLD STP): - This Phase will start immidiately after completion of Ph-II Manning and operation of STP for two years during defects liability period in two shifts per day 0600 to 1400 hours and 1400 to 2200 hours having minimum one STP opeartor and one helper having past experience of such work, in each shift for sewage treatment plant of capacity 2.0 MLD with consisting of the equipment like Submersible sewage pump non clog type 3 Phase, Compressor motor 3 Phase, Filter of 2 no's, filter pump, Equilization Tank feed motor and all other connected items like valves etc and maintaing of log book complete all as specified and directed.

Phase - IV (b) : - All as per item No. 74 above but Manning and opertion for third year.This Phase will start immidiately after completion of Ph-IV (a).

Phase - IV (c) : - All as per item No. 74 above but Manning and opertion for fourth year.This Phase will start immidiately after completion of Ph-IV (b).

Phase - IV (d) : - All as per item No. 74 above but Manning and opertion for fifth year.This Phase will start immidiately after completion of Ph-IV (c).

NOTE FOR SERIAL ITEM NO. 73 & 74 The defect liability period of STP work is two years. Therefore the M & L cost of repair and replacement of defective spares as observed during DLP of two years are included in the rates quoted of respective schedule for works under Ph-I and Ph-II respectivly.

NOTES FOR SERIAL ITEM NO. 73, 73.01,73.02, 73.03, 74,74.01,74.02 & 74.03 (i) Testing of water sample shall be carried out by contractor from Govt.approved lab/registered lab monthly and the should be produced to Engineer-in-Charge for every month without fail. (ii) contarctor shall submit ID proof,police verfication, Bank A/C deatils, Educational certificate to department and obtain approval from GE before employing person as a STP operator and helper . (iii) Payment shall be done by crossed cheque through aadhar linked bank account only and it shall not be less than minium fair wages as per act in vogue. The contractor shall submit proof of payment before claming payment. (v) Contarctor has to submit proof of payment of ESI ( insurance ), EPF subscription made by him as applicable as per latest laws/acts before claming RAR. (vi) Contarctor shall provide two set of uniform, shoes, safety belt, stationery, basic tools,log book to each employed person. (vii) STP operator should be minimum ITI qualified and done any course related to Maintanence and operation of STP from state /Govt recognised institute and having 3 years of experience in operation of STP . (viii) STP helper should be minimum 10th pass from state /Govt recognised institute. (ix) The cost of all consumables for satisfactory functioning of STP during DLP of two years and further period of three years shall not be included in the rates quoted. All the consumables shall be supplied by the department free of cost through issue voucher. (x) The defect liability period of STP work is two years. Therefore the cost of repair and replacement of defective spares etc as observed during DLP of two years are included in the rates quoted. (xi) The Unit rates quoted shall be inclusive of testing of treated water during initial testing, periodical testing during defect liability period and further period of three years during Manning and operation period. No extra payment will be made for the same, separately.(xii). The testing shall be carried out from NABL accredite Lab as approved by GE.

M/s. Shiva Engineers (BID ID -3217357)

M K ENGINEERS CO. (BID ID -3217921)

M/s SK Traders (BID ID -3218357)

FRIZO INDIA PVT LTD (BID ID -3218080)

PRAGMATIC INFRASTRUCTURE LIMITED (BID ID -3219226)

Komal Buildcon Pvt. Ltd. (BID ID -3219405)

JASPAL SINGH & CONST (BID ID -3219519)

R R CONSTRUCTION (BID ID -3219299)

City Promoter and Buildwell Pvt. Ltd. (BID ID -3219588)