FABRICATION, SUPPLY AND INSTALLATION OF LINEAR WORKSTATIONS AND MOBILE PEDESTALS IN NILA BUILDING TECHNOPARK PHASE I CAMPUS, TRIVANDRUM

Amount

FABRICATION, SUPPLY AND INSTALLATION OF LINEAR WORKSTATIONS AND MOBILE PEDESTALS IN NILA BUILDING TECHNOPARK PHASE I CAMPUS TRIVANDRUM AS PER THE TERMS AND CONDITIONS OF THE TENDER DOCUMENT ETPK/PH-I/2023-24/AT-198

Linear Sharing Workstations (Size:- 1200 mm (W) X 600 mm (D) X 750 mm (H)) • Table Top: 25 mm thick pre-laminated particle board in E1 grade finish with 2 mm thick PVC edge banding of REHAU make and 681Kg/M3 density with 0.68 N/mm2 Tensile strength, 475 rev abrasion resistance (min) with 6.25 mg/100g dry board formaldehyde content, grommet hole with cap should be provided on table top to access plug sockets below the table. • Support Legs: The tabletop shall be supported on 50 X 50 mm, MS Powder coated square legs with 16 gauge metal thickness. Crossbar should be made of 40 X 20 mm MS tube with powder coated finish (60-80 microns). • Privacy Screens: Sandwitch glass screens with 8 MM thick laminated glass (300 mm Height) of approved colour supported on brackets duly powder coated. • Wire Management: Wire manager raceway frame for electrical & network of size 50 mm thick X 250 mm Height CRCA sheet with 16 gauge thickness with powder coated finish should be provided on main span below the table with separator for data and power cables. Necessary cutting has to be provided for placing the sockets (electrical/network) as per the directions of Technopark. The Wire entry box should be provided to each cluster of workstations and the size of wire entry should be 200 w x 50 d x 425 ht (mm) made of 16 gauge thick MS sheet.

Linear Non - Sharing Workstations (Size:- 1200 mm (W) X 600 mm (D) X 750 mm (H)) • Table Top: 25 mm thick pre-laminated particle board in E1 grade finish with 2 mm thick PVC edge banding of REHAU make and 681Kg/M3 density with 0.68 N/mm2 Tensile strength, 475 rev abrasion resistance (min) with 6.25 mg/100g dry board formaldehyde content, grommet hole with cap should be provided on table top to access plug sockets below the table. • Support Legs: The tabletop shall be supported on 50 X 50 mm, MS Powder coated square legs with 16 gauge metal thickness. Crossbar should be made of 40 X 20 mm MS tube with powder coated finish (60-80 microns). • Privacy Screens: Sandwitch glass screens with 8 MM thick laminated glass (300 mm Height) of approved colour supported on brackets duly powder coated. • Wire Management: Wire manager raceway frame for electrical & network of size 50 mm thick X 250 mm Height CRCA sheet with 16 gauge thickness with powder coated finish should be provided on main span below the table with separator for data and power cables. Necessary cutting has to be provided for placing the sockets (electrical/network) as per the directions of Technopark. The Wire entry box should be provided to each cluster of workstations and the size of wire entry should be 200 w x 50 d x 425 ht (mm) made of 16 gauge thick MS sheet.

Mobile Pedestals (Size:- 400 mm (W) x 450 mm (D) x 650 mm (H)) with central locking. • Pre laminated mobile pedestal unit with 3 drawers. Upper 2 box drawers + 1 file drawer. • PLPB (Pre Laminated Particle Board) pedestals with complete18 mm thick pre laminate particle board and with PVC lipping. • All pedestals with heavy duty soft closing telescopic slides. • Each set of slides can bear a load of 35kgs per drawer. • All pedestals supported by 5nos heavy duty castors ,pedestal can with stand load of 80kgs. • Lock keys and body made of antibacterial material. • Master keys are to be provided in case of loss of keys. • PLPB (Pre Laminated Particle Board) pedestals come with Aluminium/ PVC depressed handles and with side Aluminium groove opening without any handles.

Naran Chirakkal Corporate Pvt.Ltd.

METAFAB TECHNOLOGIES

Featherlite Office Systems Pvt Ltd