Establishment of Pasteurized Compost Making Unit (Capacity 35 MT) at Zonal Agricultural Office Karhama Tangmarg District Baramulla Civil work.

Engagement of mechanical JCB for general site clearance by way of removal of roots, tree stems and levelling of ground surface complete job etc.,

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil.

Providing and laying of stone solling duly hand packed including ramming, dressing and watering and all carriages complete job.

Providing and laying in position cement concrete ofspecified grade excluding the cost of centering and shuttering. All work up to plinth level: 1:4:8 (1 cement:4 coarse sand: 8 graded stone aggregate 40mm nominal) crushed.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete job etc.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Columns, Pillars, Piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms

Providing/filling of Boulders/GSB/RBM in underfloors icluding all carriages complete job.

Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing of 20mm dia 450mm long bolt full thread with nuts and washers for anchoring the steel structure incl. welding the bolts at bottom with 20 mm flat iron strip of atleast 200mm long all complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: Welded.

Providing and fixing colour coated Hi-Rib type G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, nuts bolts in horizontal/vertical or curved surface) excluding the cost of rafters, bolts and nuts 8mm diameter with bitumen and G.I limpet washers including ridges, hips, valleys all complete: 50mm thick complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) complete job.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported KD wood.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge: Imported KD wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured): 4 mm thick glass pane (weighing not less than 10 kg/sqm).

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.

12 mm thick cement sand plaster in 1:4 mix complete job etc.,

Finishing with Deluxe multi surface paint system for interiors: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter/10sqm.

Wall Painting with weather proof emulsion paint of approved brand and manufacture like APEX ULTIMA, Ace exterior emulsion, Protek etc., to give an even shade. Two or more coats on new work.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.. complete: 100x58x1.90 mm.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete: 150x10mm.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete: 100x10mm.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 125mm.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 100mm.

Providing and fixing of link lock sliding bolts complete job.

Providing and fixing of foundation and inaugration stones incl. curtains with curtain rods and necessary ancillary items required at site and directed by engineer incharge at site (Foundation and Inaugration stones comprises of two jobs).

Carriage of materials by MT from source to site of work complete job.

Coarse Agg. from 20 kms avg. lead:

Sand from 40 kms avg. lead:

Bricks from 35 kms avg. lead: