CONSTRUCTION OF VOCATIONAL LABS UNDER PM SHRI AT KENDRIYA VIDYALAYA AT AF STN NALIYA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n exc 3 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils.

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

Removing excavated material (soils) exc. 250m but n exc 500m and depositing where directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agregate as in foundations, filling and mass concrete.

M&L for Reinforced cement concrete M-30 (design mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for Reinforced cement concrete M-30 (design mix) in Columns, pillars, piers, posts and struts

M&L for Reinforced cement concrete M-30 (design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for Reinforced cement concrete M-30 (design mix) in Chajjas

M&L for Reinforced cement concrete M-30 (design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for Reinforced cement concrete M-30 (design mix) in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like

M&L for fair finished Formwork to fins, louvers, fascia

M&L for fair finished Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter (flat)

M&L for fair finished Formwork to sides of pillars, posts, struts, piers, columns and stanchions (square, rectangular or polygonal)

M&L for fair finished Formwork to chullah hoods, chajjas, troughs and similar items including edges (flat)

M&L for fair finished Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. (flat)

M&L for fair finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping, flat)

M&L for TMT (CRS) bars Mild steel 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for TMT (CRS) bars Mild steel 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for TMT (CRS) bars Mild steel 5 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for stirrups, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for block masonry with precast cement concrete type C1 1:3:6 (20mm graded aggregate) solid blocks exc 10cm in width and setting in cement mortar 1:6 all as specified and directed.

M&L for 10 mm thick rendering in cement sand mortar (1:6) on other than fair face of brick work surface finish even & smooth without using extra cement complete all as specified.

M&L for 15 mm thick rendering in cement sand mortar (1:4) on fair face of brick work surface finished even & fair.

M&L for 5mm thick rendering in cement sand mortar (1:3) on Ceilings finish even & smooth without using extra cement complete all as specified.

M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm thick graded stone aggregate as sub base in floors complete all as specified.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm thick graded stone aggregate as in flooring complete all as specified.

M&L for 20 to 25mm thick mirror polished kota stone slab over 20mm thick cement screed 1:4, laid and jointed with grey cement slurry with pigment to match the shade of the kota stone including rubbing polishing complete all as specified.

M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform Complete all as specified and directed

M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vetical surface complete all as specified.

M&L for Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade (double charged matt finish) complete all as specified and directed by Engineer-in-Charge (tiles shall be approved by Engineer-in-Charge)

Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified

S & F powder coated aluminum openable windows as per TD No.CEAG/AR/TD/05R dt 17 Nov 2022 (5ALPFW3B) of CE (AF) Gandhinagar zone including all necessary fittings compete all as directed by Engr-In-Charge.

M & L for Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors incl. hinges and all necessary arrangement; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 all as specified .

M&L for providing cement concrete 1:3:6 type C-0 using 10mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M & L for applying two coats of synthetic enamel paint over one coat of primer on steel surfaces of any description, over 10cm in width or girth, including preparation of new surfaces complete all as specified.

S&F Flush Shutters 35 mm thick , solid core construction, with block board core and plywood face panel , commercial type on both side, both side laminated complete. Including edges of door covered with teak bead and making provision for fixing mortice lock and hinges complete.

S&F100 mm Butt hinges, extruded powder coated aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ISI marked all as specified.

S&F 200mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed all as specified and directed.

S&F 150 mm Extruded powder coated aluminium alloy handles fabricated type, anodised all as specified.

S&F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & as directed.

S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with ecrews to timber frame work.

S&F continuous (piano) hinges, mild steel, 30mm width flaps (when open), bright finish or electro galvanised (ISI marked)

S&F 100 mm Extruded powder coated aluminium alloy handles fabricated type, anodised all as specified.

S&F 100mm size aluminum anodized barrel tower blots of extruded section and fixed (ISI marked)

S&F 150 mm long hasp and staple, safety type, aluminum anodised hinge pin including bolt to hinge plate and fixed with screws.

S&F in repair 25 mm dia aluminum anodised curtain rod cut to length and fixed including brackets, stops, roller etc all as directed.

M&L for 50mm thick PCC 1:3:6 C-0 using 12.5mm graded crushed stone aggregate as in roof padding over a coat of cement slurry including water proofing compound complete all as specified.

M&L for 10 mm thick screed bedding in cement mortar 1:3 on concrete surfaces, finished fair & even including mixing water proofing compound as per manufacturer's instructions. (WPC to be measured separately as supply only)

M & L for applying a priming coat of cold bitumen primer @ 0.30 ltr/sqm as per para 11.44.5 of MES SSR Part-I complete.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface shall be laid by torch application method and the entire surface shall be finally painted with one coat of bituminious paint complete all as specified.

Supply only Integral waterproofing compound ISI marked.

S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer white in colour hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and as directed by Engineer-in-Charge.

M & L for cement concrete 1:5:10 type E2, using 40mm graded stone aggregate as in foundation, filling and mass concrete for sunken portion complete.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F 32 mm size CP waste coupling (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl waste pipe

S&F 15mm bore PVC connection with PTMT nuts length 450 mm

S&F 75 mm bore CI floor trap plain one way/two way with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified.

S & F PVC (SWR) bends any radius for 75mm bore pipe including jointing material complete all as specified and directed.

M&L for PVC (SWR)/CI gully trap 125/110 mm, setting and jointing with solvent cement

M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

M & L for three coats of white wash on roof ceiling including preparation of newly plastered surfaces complete all as specified.

M&L for two coats of plastic emulsion paint over a coat of primer including 3mm thick birla wall care putty on newly plaster surfaces of walls incl preparation of surfaces complete all as specified..

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation.

M&L for aluminum (extruded section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard & dense soil

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.

M&L for Broken stone hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified.

M&L for Machine pressed rubberised precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as spcified and directed.

M&L for 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4, type B-1 20 mm graded stone aggregate as in kerb stone, fair faces, including chamfers, weatherings, throat-ing etc. and setting in CM 1:6.

M & L for cutting existing GI tubing 50mm dia in position and screwing the pipe of both sides for insertion of tee equal 50 x 50 x 25mm dia for branch line etc for new water connection complete all as specified and directed.

M & L for 25 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors/trenches etc complete all as specified.

M & L for 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors/trenches etc complete all as specified.

S & F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F PTMT float valve with epoxy coated aluminum rod and high density plastic ball of size 20mm bore complete all as specified and directed.

M&L for conc 1:3:6 type C2 using 40mm graded aggregateas in bed to 150mm drain pies incl packing under and haunching against the sides of pipes after they are laid and tested for.

M & L for Reinforced concrete pipes, class NP2, 150mm dia, laid and jointed complete with collars complete all as specified and directed by Engineer in charge.

M&L for block masonry with precast cement concrete type 1:3:6 (20mm graded aggregate) solid blocks exc 10cm in width and setting in cement mortar 1:4.

M&L for rendering 15mm thick in cm 1:4 concrete walls or stone masonary walls surfaces as in wall finishes even and smooth using extra cement incl mixing of WPC. (Note: WPC shall be measured and paid for seperately)

M&L for cement concrete type B1 (1:2:4) using 20 mm graded cushed stone aggregate as in coping, benching and the like including fair finished form work.

M&L for Precasted reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in drain/ manhole covers set in cement mortar 1:4. (Note : Slab covers shall be floated with surface vibrator, and over turfed base, arrangement for turfed base has to be from contractors side)

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, incl forms moulds, mitered/stopped ends etc.

Supplying and laying of CPVC pipes of outer dia 20 mm SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC pipes of outer dia 16 mm SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 15mm bore CP bib tap, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions brass ferrule and fixed.

S & F 15mm bore stop valves, cast copper alloy, screwed down, high, pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions brass ferrule and fixed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-2 10gms/ 25mm-455gms/ 40mm - 690gms)

S&F 20 mm Gun-metal, globe or gate valves, with iron: wheel head, screwed both end for iron pipe and fixed.

M & L for point wiring complete with 1.5 sqmm single core multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLSH PVC insulated unsheathed copper earth wire including Suitable for modular switches and sockets for One light/fan point controlled by one, one way switch complete all as specified and directed by Engineer-in-Charge.

All as per item No.95 above but one 3 pin 5 Amps socket out let on independent board

All as per item No.95 above but one 3 pin 5 Amp socket outlet on the same board

All as per item No.95 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

S&F Modular switch 1 way 6A, 1 module

S&F Modular switch 1 way 16A, 1 module

S&F ceiling rose surface bakelite 65mm x 50mm three terminal all as specified and directed

S& F modular socket 6/16 Amp, 2/3 pin, combined, 2 Module. ISI marked all as specified and directed by Engineer-in-Charge.

S& F modular socket 6 Amp, 2/3 pin, combined 2 module, ISI marked all as specified and directed by Engineer-in-Charge.

S&F Fan step regulator, 120W - 2 module

S&F modular white cover plate with frame 3 module

S&F modular white cover plate with frame 6 module

S&F modular metal flush box 3 module

S&F modular metal flush box 6 module

S & F LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

M & L for sub main wiring with two runs (two runs measured as one run) of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core size copper conductor drawn through and including PVC concealed conduit with accessories and 2.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI marked earth continuity wire complete all as specified and directed.Note : -Two runs of conductor with one run of earth wire and one run of conduit will be measured and paid as one unit

S&F double door Sheet metal enclosures factory made DBs with protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 240 volts powder coated painted all as specified.

S & F MCB DB SPN 12 way double door with 240 V, 200 Amp rated bus bar with all accessories fixed in the wall.

S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN, 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning.

S&F 240V 10KA 'C' curve miniature circuit breaker (MCB) of SPN, 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning.

S&F 240V 10KA 'C' curve miniature circuit breaker (MCB) of SP, 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning.

S & F ceiling fans complete with blades, down rods, electronic regulator/remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by the Engineer-in-Charge.

S & F metal body exhaust fan AC single phase, 230/ 240 volts of size 300 mm sweep with net frame including making hole of suitable size to fix the exhaust fan,as per manufacturer instruction, connecting with and including 1.5 sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete all as directed by Engineer-in-Charge.

S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

M & L for Earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including galvanised earth lead wire 4.0 mm dia by means of nuts bolts checknuts and washers of galvanised iron including 15 mm bore GI pipe, medium grade upto 7.50 mtr long all as shown in electrical plate No. 3, SSR PART-I, and testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric or XPM [Weight hot less than 4 Kg/Sqm, with cast iron funnel with wire mesh, GI watering pipe of 20mm bore, medium grade test point and lugs complete.Note: (i) Item includes cost of 7.5 mtr length of GI pipe and earth lead for protection of earth lead ,any variation in length shell be adjusted through deviation order (ii) on testing if earth resistance less than specified not obtained earthing will be regenerated at no extra cost till the desired earth resistance is obtained.

M & L for clear, dry river sand in trenches/ ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth (punned down to 10cm) after laying the cable complete all as specified. Note: Punned thickness shall be measured and paid.

Supplying and laying unreinforced precast cement concrete cable: covers, Class LV Type- 1, Flat size 250 mm x 150 mm x 40 mm in trenches for cable protection embossed with “LT 1100 VOLTS ELECTRIC" on the top surface complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminum conductor of sizes 25 sqmm 4 core.

M & L for cutting the existing road hard standing surface to a depth of 70 mm and 50 mm width and getting out for laying underground pipe including returning filling in watering well ramming in layers not exceeding 25 cm in soil and filling the top 15 cm thick with PCC 1:2:4 type B1 using 20 mm graded stone aggregate and finishing even and smooth without extra cement including despread of stockpiles soil.

Supply and lay pipe galvanized, "Light grade", including fittings 50mm (2") dia complete all as specified and directed.

S&F 4 pole MCCB 63 Amp, 50Hz , 415 V with rupturing capacity 16KA all etc complete as specified and directed.

Vijay Construction Co (BID ID -3470128)

Hari Construction (BID ID -3469005)

Krishna Engineering (BID ID -3478974)

Sukhi Electricals (BID ID -3478279)