SPECIAL REPAIRS TO TOILETS OF CERTAIN AIRMEN BILLETS AT AF STN NALIYA

Amount

Taking down and refixing in shutters in same opening of any description exceeding 1sqm but not exceeding 2 sqm each complete all as specified & directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each ( without taking off shutters from the frames) complete all as specified & directed.

Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames) complete all as specified & directed.

M&L 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed complete all as specified & directed.

M&L preparing new wooden surfaces of backs of chowkats and treating ends of backs of chowkats with tar or coal tar black paint, area tarred exc 0.1 sq. m but n exc 0.50 sq. m each complete all as specified & directed.

Treating small articles such as holdfasts with tar or coal tar black paint, area n exc 0.1 Sqm each complete all as specified & directed.

M&L PCC 1:3:6 type C-1 (by using 20 mm graded broken stone aggregate) as in providing, cement concrete inlintel up to 1.5m clear span, cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs complete all as specified & directed.

S & F 35 mm thick, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified & directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing complete all as specified & directed.

M&L preparation of new wooden surfaces of any description exceedding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F powder coated aluminium ventilator shutters with frame (aluminium section weighing 0.55Kg/m), fixed without sash bars, openable type (Top hung double shutter) and glazing complete with 5.5mm thick coloured/tinted sheet glass and Aluminium wire mesh with necessary clips, hinges, aluminium(anodised) peg stay 30 cm long-01 No. with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as shown on drg No. CEAA/64 complete all as specified and as directed (Make of aluminium section: Jindal/INDAL/ Hindalco)

S&F stainless steel butt hinges medium weight with stainless steel pins 100 mm long complete all as specified and directed.

S&F in repair stainless steel butt hinges medium weight with stainless steel pins 100 mm long complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, 250mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F 140mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring ,fixed in floor complete as all as specified and directed.

Taking down cement plaster on brick, concrete surfaces etc including racking out joints hacking for key, scrubbing down with water etc from walls and ceiling surfaces of any description complete all as specified and directed.

M&L for rendering 5mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without extra cement complete all as specified.

M&L for rendering 10mm thick cement plaster in cement mortar (1:6) as 1st coat and 5mm thick in cement mortar (1:4) mixed with water proofing compound @ 3% by weight of cement as 2nd coat on brick or concrete wall surfaces, finished even and smooth without extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.

M&L for rendering cement plaster 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M &L for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer etc complete all as per specified and directed.

M&L for preparation of new plastered surface of walls and applying two coat of oil bound distemper white or any shade over a coat of alkali resistant priming paint over two coats of wall putty complete finished smooth complete all as specified and directed.

Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid coloured Ceramic tiles 300X 300X 6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for Coloured glazed ceramic liles 300x200x7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment including Rendering 10mm thick in cement mortar (1:4) as backing coat to tiles complete all as specified and as directed.

Demolition of lime/cement concrete of any description and in any position not otherwise specifically provided for including WC etc complete all as specified and directed.

M&L for Plain cement concrete (1:5:10), type E2, using 40mm graded stone aggregate in sunken floor surface finished fair and fair complete all as specified and as directed.

M&L for rendering 10mm thick, in cement mortar (1:3) on concrete/brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement complete all as specified and directed.

M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent including necessary pond testing in sunken portion complete all as specified and directed.

Providing plain cement concrete [1:2:4] type B0 using 12.5 mm graded aggregate 40mm average thickness as in sunken floor of wc/bath/toilet finished even and smooth without using extra cement mixed with water proofing compound Dr Fixit pidiproof LW+ or equivalent at 200ml/50kg of cement complete all as specified and directed.

Supply only integral water proofing compound all as specified.

M&L in repairs for vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap without provn of lime concrete complete all as specified supplied.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern ), white (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F in repairs, 10 litre capacity PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete as specified & directed.

S&F 32 mm dia flush pipe of polyethylene of low or high density or PVC for low level cistern connect to squatt pattern /pedestal pan, closet including all joints and making good to the floor complete all as specified and directed.

S&F in repairs Vitreous China Urinal flat back size 465x355x265 mm white (minimum) , with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified & directed.

S&F in repair Vitreous China wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including pillar tap 15mm bore, cast copper alloy fancy type chromium plated, waste fittings, PVC waste pipe 600 to 750 mm long, PVC connection, including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

Supply only 32mm dia LDPE PVC waste pipe, 600 to 750mm long (Pressure rating6kg/sqcm) for WHB includding socket & screw complete all as specified and directed.

Supply only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 15 mm bore of pipe including taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe including taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

S&F in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F in repair, pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S & F in repair, 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F Stop valves in repairs, 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair, 20mm bore stop valves, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 20mm bore complete all as specified and directed.

S&F in repairs 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 32mm- 45gnms complete all as specified and as directed.

Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) pipe , single socketed laid in trenches/ floors, in any length with rubber ring joints complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend any radius for 110 mm bore pipe incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal for 110mm dia bore as complete all as specified and directed.

S&F PVC 75mm dia (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend any radius for 75 mm bore pipe incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal for 75mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal for 75mm dia bore as complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

M&L in repairs salt glazed stone ware gully traps square of size 150mm x 150mm including for setting and jointing to drain with cement mortar (1:1) etc complete all as specified & directed.

M&L for cutting out cracks to 'V' section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.

M&L Water proofing treatment on RCC roof etc, comprising with the following operation & as specified here in below :- Taking down/scraping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n exc 250m and applying 15 mm thick plastering in cement mortar 1:3 finished even & smooth, preparing & cleaning of fully dried cement plastered surface applying one coat of cold bituminous primer to the plastered surface @ 1.50 Kg per sqm conforming to IS 3384-1986 & applying A layer of APP bases polymeric membrane 3 mm thick (minimum) weighing 3.5 Kg per Sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be 100 mm on transverse direction & 75 mm on longitudinal direction all as specified and as directed.

S&F rubber speed breaker made from heavy duty tough rubber and polyethylene with high resistance wear & tear property. Best suitable height of 2” (50mm) for speed Restriction UV stabilized colours in black & Yellow combination. High reflective mark showing arrows in white colour are marked on both sides of yellow and black bumps. The two bumps Yellow & Black are both having end caps of contrast with two holes . The size of breaker is 350x50x250 mm with four holes. The whole breaker is fixed with and including epoxy and hardener and bolts complete all as specified and as directed. Make:- Sinor (DA- 1005), 3M or equialant make as approved by GE.

Providing and fixing distance informatory/ destination sign boards made out of 3 mm aluminium composite panel size 90 cm x 75 cm rectangular as per design of IRC-67-2010. Reflectorised with retro reflective high intensity micro prismatic poly carbonate sheeting as per latest MOST specifications, letters and numbers should be both side as per IRC-67-1968, 2.80 M long (2 Nos) SS angle of 50x 50x 5 mm and NB65 mm SS pipe as required. The details of Symbols for each board Size/Shape/Colour shall be as per the instruction of Engineer - in- charge. The fixing at site shall be in (1:2:4) PCC block of size 45x45x60 cms for each leg including excavation curing etc, complete under the supervision of Engineer-in-charge HIgh intensity grade/ prismatic ASTM type IV. (Area of board only will be considered as area of each board for payment.) Note:- Cost of earthwork and PCC (1:3:6) type C1 (using 20mm graded stone aggregates) for fixing of poles shall be deemed to be included in the quoted rate.

S&F 800 mm Convex mirror made of PC material provided with suitable pipe post, grouted with PCC, duly painted and made good as per site requirements, having clear and definite mirror image having 130 degree of viewing angle suitable for road turnings, intersections, curves, parking lots, etc. Make:- SInor, 3M or equivalent Note:- Cost of earthwork and PCC (1:3:6) type C1 (using 20mm graded stone aggregates) for fixing of poles shall be deemed to be included in the quoted rate.

Taking down carefully copper/ aluminum point wiring (light, fan, socket or power etc.) complete including fitting and fixture such as switches, socket, ceiling rose, pendent, regulators, light fittings, etc. complete all as specified and as directed. Note:- Job including for taking out old gutties, screw, nails, casing caping/ conduit etc. and making good to disturbed surface of wall/ floor/ ceiling etc. to match with the existing surface.

M&L for point wiring with 1.5 Sqmm, FRLS, single core, PVC insulated, unsheathed, 1100 Volts grade with multistranded copper conductor drawn through and including PVC casing and capping with all accessories fixed to wall/ floor/ ceiling etc. and including provision of 1.5 Sqmm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including PVC box, ISI marked of suitable size for mounting the switches, socket outlets, fan regulators etc. complete all as specified and as directed for following:- One light/ fan point controlled by one, one way switch.

One 3 pin, 5 Amp, socket outlet on independent board.

One 3 pin, 5 Amp socket outlet on the same board with other switches.

Descrition all as per Srl Item No. 2.00 here-in-before above but with 2.5 sqmm single core cable for one 3 pin socket outlet 15 Amps on independent switch board including 2.50 Sqmm as earth continuity conductor and connected to common earth dolly complete all as specified and as directed.

S&F of switch piano, flush type, single pole, one way, 5 Amp complete all as specified and as directed.

S&F of ceiling rose three terminal, PVC/ Polycarbonate, isolated body, complete as specified and as directed.

S&F of switch socket combination 2 in 1, multipurpose, 3 pin, 5/ 15 Amps, flush type, controlled by one switch complete all as specified and as directed.

S&F of switch socket combination 2 in 1, 5 Amp, flush type, controlled by one switch complete all as specified and as directed.

S&F of socket outlet 2 in 1, 3/ 5 pin, 5 Amp, multi purpose, flush type complete all as specified and as directed.

S&F in replacement of MCB DB, SPN, 4 ways double door with 240 Volt, 200 Amps rated bus bar with all accessories fixed in the wall including taking out old DBs any type and capacity and making good the disturbed surface to match with the existing surface of wall complete all as specified and as directed.

S&F in replacement of MCB, single pole and neutral, 6 to 32 Amps, 240 Volts, complete all as specified and as directed.

S&F in replacement of MCB, single pole, 6 to 32 Amps, 240 Volts, complete all as specified and as directed.

S&F for LED tube light with 01 No. of LED tube 18 Watt, fixed on two Nos. of square block with twin core copper flexible wire and including taking down old type tube light fitting etc complete all as specified and as directed. Make:- Bajaj Cat Part No. BLRB 18W CW for tube and BLRB-DB 118 for Batten or equivalent model & make of Bajaj/CG/Havells/Surya or as approved by GE.

S&F in replacement of lamp holder, PVC/ Polycarbonate type, insulated body with back plate batten/ angle type for batten fitting complete all as specified and as directed.

S&F LED bulb 10 watt white B-22, complete all specified & directed.

S&F 4 blade metal body exhaust fan AC single phase 230/240 V of size 300mm sweep grey with louver, speed 1400 RPM complete all as specified & directed. Note: Rate shall including taking out old exhaust fan and will be deposited in mes store yard. Cat Part No. FHEHDSPDB120 of make Havells or equivalent model and make of crompton, khaitan, usha, bajaj, orient, anchor or as approved by GE.

M&L in replacement for sub main wiring with two runs of single core multistranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS), drawn through and including PVC capping & casing not less than 25mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 2.5.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke (FRLS) as earth wire fixed to wall, ceiling roof etc including taking down old unserviceable sub main wiring of any size with capping & casing/ conduit with all accessories complete all as specified and as directed. Note:- Two runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

Supply and laid in trenches/roof/wall etc. galvanised steel water tubing of size 50mm dia bore, medium grade including necessary fittings such as GI bends, Tees, Union etc. complete and connecting to water supply pipe line including taking out existing old/ rusted out steel tubing and connections complete all as specified and as directed. Note:- Cost of nececesary excavation, returning filling shall be deemed included in quoted rate.

Supply and laid in trenches/roof/wall etc. galvanised steel water tubing of size 25mm dia bore, medium grade including necessary fittings such as GI bends, Tees, Union etc. complete and connecting to water supply pipe line including taking out existing old/ rusted out steel tubing and connections complete all as specified and as directed. Note:- Cost of nececesary excavation, returning filling shall be deemed included in quoted rate.

Supply and laid in trenches/roof/wall etc. galvanised steel water tubing of size 20mm dia bore, medium grade including necessary fittings such as GI bends, Tees, Union etc. complete and connecting to water supply pipe line including taking out existing old/ rusted out steel tubing and connections complete all as specified and as directed. Note:- Cost of nececesary excavation, returning filling shall be deemed included in quoted rate.

S&F 25mm dia stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or fixed unions, including taking down old rusted stop cock any type.

S&F 50 dia bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 20mm bore bib taps, cast copper alloy with fancy type, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and including removing of old unserviceable bib taps any type complete all as specified & directed.

Hari Construction

KALIKAY ENTERPRISES

Krishna Engineering