REPAIR TO PCC FOOTPATH AND HARDSTANDING, FENCING AND GATES AT VARIOUS SECTORS OF AGE CHARDUARUNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above the ground level) (un-reinforced) and removing to a distance n.exc 50m distance complete all as specified and directed.

M&L for Hardcore of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15mm thick watered and rammed to true surface using broken stone aggregate complete all as specified and directed.

M&L for 75mm thick cement concrete type C2, 1:3:6 (using 40mm graded crushed stone aggregate ) as in foot path and making finished even and smooth without using etra cement complete all as specified and directed.

M&L for 100mm thick cement concrete type B2, 1:2:4 (using 40mm graded crushed stone aggregate ) as in hard standing and making finished even and smooth without using extra cementcomplete all as specified and directed.

Dismantling floors, hearth or wall tiles including cment mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premi etc complete all as specified and directed.

M&L for chequered cement concrete tiles of 200mm x 200 mm x 25mm thick set and jointed in neat cement slurry in floor with grey cement and pigment complete all as specified and directed.

M&L for screed bed or bedding layers of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

Brushing neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

M&L for sand filling under floors or below blocks or in foundations incl watering and consolidation complete all as specified and directed. Note:-Sand shall be sharp,angular free from organic and harmful matters and consolidated thickness shall be consider for measurement.

Dismantling precast concrete articles on floors complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade set jointed and pointed with grey cement and pigment complete all as specified and directed.

M&L for cement concrete in foundation (1:3:6) type C2 (using 40mm graded stone aggregate as in surface channels & drain complete all as specified and directed.

Demolition of brick work masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM(1:4) on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 20 mm graded crushed stone aggregate) as in coping kerbs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of white wash and treated with two coats of white complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using (20mm graded crushed stone aggreagates) in pre cast posts, fencing posts, strainig or terminal posts, struts etc, for fencing, average sectional area exc 100 sq cm but n.exc 250 sq.cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia cut to length bend to shape required including cranking bending spirally for hooking for columns hooking ends and binding with & incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 8mm dia cut to length bent to shape required including cranking bending stirrups,spacers and binders and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good distubed ground posts embedded in concrete, brickwork, masonary complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good distubed ground posts embedded in natural ground complete all as specified and directed.

Excavation in post holes or similar holes each n.exc 0.5 Cum getting out, returning ,filling and ramming earth in layers n.exc 25cm , watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

S&F Rolled MS in joist, angle, channel sections fixed independently without connecting plates etc of grade Fe 410W (Gde E-250) quality B complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooking ends and fixing to chain link fencing complete all as specified and directed.

S&F in repair Galvanized 2 stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

M&L for chain link fencing MS galvanized 3.14 mm dia 100mm x 100 mm mesh fixed to RCC post including securing or tying with GI MS wire stape etc complete all as specified and directed.

M&L for chain link fencing MS galvanized 3.00 mm dia 75mm x 75 mm mesh fixed to RCC post including securing or tying with GI MS wire stape etc complete all as specified and directed.

S&F MS screw bolts 11to15 mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and haxagonal or squqre exc 15cm and in n.exc 22.5 cm long complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for etc complete all as specified and directed.

M&L MS works as in framed work such as grills gratings etc with ends of bars shouldered and/or riveted or forged into spikes and siilar works conforming to Fe-290, Gde E-165 etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description exc 10cm width or girth and applying one coats of synthetic enamaled paint complete all as specified and directed.

Raj Enterprise

M/S JALALUDDIN AHMED

SRI JAINATH SINGH