Construction of 1 ACR at Primary School Pati Dursuma Kangan

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.including all carriage involved complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level complete.i incl all carriage involved from approved source to siteof work complete.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers etc all complete.

Providing wood work (Imported Wood) in frames of doors, windows, clestory windows and other framed work and fixed in position with holdfasts, lugs or with dash fasteners of required dia complete as per the directions of Incharge Enginner.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and fixing of 30mm panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enambled MS butt hinges with necessary screws, all complete as per the directions of Incharge Engineer. (Imported Wood).

Proviidng and fixing of 3.5mm thick glass panes of approved brand and manufacture inclusing all necessary beading, nails and other fittings/fixtures complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) all complete.

Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer all complete.

Structural steel work (welded ) in built up sections, trusses and framed work, including MS sheet eveas boarding and soffits, cutting, hoisting and fising in position and applying of priming coat of approved steel primer including MS sheets for eves boarding and soffit projaction etc carriage of material all complete.

Providing/Fixing of Plain Colour coated profile sheets for roofing including vertical/curved surface fixed with Polymer coated J or l hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers or with G.I Limpet washers filled with white lead, including overlapping of sheets complete (upto any pitch in horizantal/ vertical or curved surface) excluding the cost of purlins, rafters (0.50mm thick) complete as per the directions of Incharge ENngineer.

Providing and fixing of 10mm thick ply wood of standard quality in ceiling including cost of imported jambs 2"x1.5" by making 4"x4" square pannels including cost of imported wooden jambs 2"x1.5" size and all necessary nails, screws all complete.

Providing and fixing of 12mm thick factory made imported veneered flat pressed three layers or graded wood partical board for panelling of doors all complete.

Providing and fivxing of Aluminium Hardware iteams of approvewd brand and make including necessary fittings/fixtures complete:-

Tower Bolts 6"

Tower Bolts 4"

Handles 6"

Handles 4"

Aldrop

Carriage of materials from approved source to site of work:- Sand/ stone aggregate for an average lead of 10Kms.