WELCOME MAINTENANCE AND MISC WORK SERVICES AT OMQ AT AF STATION NALIYA

Amount

Taking down of cement plaster from surfaces of wall of any description including raking out joints, hacking out for key, scrubbing down with water etc including complete treatment if any complete all as specified and directed.

Material and labour for rendering 15mm thick in two coats (10+5mm) on concrete surfaces of walls. 1st coat 10 mm thick in CM 1:6 as base coat and 2nd coat 5mm thick in CM 1:4 using liquid water proofing compound (2% by weight) finished the surface even and smooth without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separatly.

Material and labour for rendering 5 mm thick cement plaster on concrete surfaces of chajja in CM 1:4 using liquid water proofing compound (2% by weight) finished the surface even and smooth without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separatly.

Material and labour for preparation of new surface of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, alkali and fungal resistance, dirt resistance exterior paint of required shadewith silicon additives @1.43 litre/10Sqm over and including priming applied @ 0.90 litre/10 Sqm over new plastered surfaces compelte all as specified and directed.

Material and labour for rendering 10mm thick on concrete surfaces of walls in CM 1:6 , finished the surface even and smooth wihout using extra cement etc complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls, and applying two coats of oil bound distemper over a coat of primer all as specified and directed

Material and labour for rendering 5 mm thick on concrete surfaces of ceiling in CM 1:3 , finished the surface even and smooth without using extra cement etc complete all as specified and directed.

Material and labour for preparation of new plastered of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of with alkali resistant priming paint over 3mm thick layer of wall putty complete all as specified and directed

Material and labour for preparation of old surface of ceiling of any description and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for 3mm thick wall care putty on wall complete all as specified and directed.

Material and labour for cutting and widening existing cracks not exceeding 10mm in depth in 'V' shape in wall and then filling in CM (1:3) including making good to facings complete all as specified and directed.

Material and labour for preparation of decorated / undecorated surfaces of walls, soffits of chajjah of any description and at any position and applying one coat of 100 % acrylic anti fungal paint as, exterior grade, complete including complete removal of existing surface finish and necessary scaffolding arrangement for carrying out the work, as required complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or /aluminium /metal frame, glazed with putty or fixed with beads.

Supply and fix 3mm thick sheet glass ordinary quality fixing with oil putty/wooden/aluminium including rubber gasket beads in GF/FF, area of glass pane n.exc 0.50 Sqm including replacing damaged beadings complete all as spcified and directed.

All as per serial item number 18.00 here-in-before but 3mm thick figured glass pin head type

Supply and fix in repairs cup & saucer Kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel (heavy duty) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as spcified and directed.

Supply and fix in repairs cutlery kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel (heavy duty) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as spcified and directed.

Supply and fix in repairs partition kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel (heavy size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as spcified and directed.

Supply and fix in repairs plain kitchen basket of size 431x508x200mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel (heavy duty) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as spcified and directed.

Supply and fix in repairs plain kitchen basket of size 431x508x150mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel (heavy duty) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as spcified and directed.

Supply and fix in repairs dish (plate) basket of size 431x508x250mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel (heavy duty) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as spcified and directed.

Supply and fix in repairs telescopic channel (heavy duty) of size 300mmxx450mm long and roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete for each basket of kitchen cabinate complete all as specified and as directed.

Material and labour in repairs for prelaminated particle board 18/19mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed for cuboards/shelfs etc. complete all as specified and directed.

Supply and fix in repairs 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

All as per serial item number 28.00 here-in-before but 100mm long.

Supply and fix in repairs 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix in repairs MS 300mm long ordinary rat tail rod pattern springs including roller and roller plate to the wooden frames or MS frame including welding etc as required complete all as specified and directed.

Supply and fix in repairs aluminum door closer hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg complete all as specified and directed.

Supply and fix in repairs 125mm extruded aluminium handles,cast type, anodised fixed complete all as specified and directed.

Supply and fix in repairs 150mm extruded aluminium handles, cast type, anodised complete all as specified and directed.

Supply and fix in repairs 100mm long aluminium anodised hasp and staple complete all as specified and directed.

Supply and fix in repairs 25 mm dia stainless steel drapery/curtain rod with fixing bracket, complete all as specified and as directed.

Supply and fix in repairs fancy type stainless steel curtain rod bracket suitable for 25mm dia curtain rods fixed with chromium plated screws complete all as specified and directed.

Supply and fix in repairs 150mm long floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor, with rubber bush fixed complete all as specified and directed.

Supply and fix in repairs bathroom Mirror cabinet plastic fixed to wall of size 300mmx 343mm x250 mm complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick, (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc,laid over 15mm thick screed bed in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles over vertical surface of wall,350x 250x 7mm/ 450x350x7mm thick (or nearest size), set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in CM(1:4) complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in CM(1:4) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as directed.

Material and labour for 18-20mm thick Granite (of any type) pre-polished in cooking platforms and like fixed with neat cement slurry over 15mm thck cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down chowkat or frames not exceeding 1.5 sqm each with shutter(without taking of shutters from the frame) and removing from MD land complete all as specified and directed.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified and directed.

Supply and fix PVC solid door frame factory made size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced, with MS square, supplying and fixing in opening as per specification complete all as specified and directed.

Taking down chowkat or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutter(without taking of shutters from the frame) and removing from MD land complete all as specified and directed.

Material and labour for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Material and labour for preparing surfaces of wood and wood based materials, and treating back of chowkats with tar or coal tar black paint complete all as specified and directed.

Supply and fix mild steel hold fast and similar small articles conforming to Fe 290-0 or E 165 complete all as specified and directed.

Material and labour for cement concrete type C1 1:3:6 (20mm graded aggregate) for hold fasts complete all as specified and directed.

Supply and fix 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 35mm thick factory made 2nd class HW glazed/gauzed and Skelton shutter open rebated and prepared to receive glass, gauzed etc edges of framing plain chamfered fitted with cut and mitred beads for securing wire mesh all as specified and directed.

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples rate including taking down aluminium windows/wooden door/ wooden windows of any size and refixing to same frame with all fixtures and screws as required to replacement/ repair of window complete all as specified and directed.

All as per serial item number 60.00 here-in-before but fixed in repair.

Supply and fix stainless steel butt hinges medium weight with stainless steel pins 100mm long complete all as specified and directed.

Supply and fix 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed.

Supply and fix 125mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed.

Supply and fix 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

All as per serial item number 66.00 here-in-before but 125mm long

Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over one coat of primer complete all as specified and directed.

Supply and fix in repair, plate rack of overall size 24" x 24" x 10 inch made out of 0.65mm thick stainless steel sheet complete all as specified and directed.

Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washer and including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down PVC pipes including all fittings like shoes, bends, etc of any dia complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) pipe, single socketed in any length rubber joints fixed to walls complete all as specified and directed.

Material and labour in repairs, 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

All as per serial item number 76.00 above but for 110mm dia bore

Supply and fix 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed

All as per serial item number 78.00 here-in-before but for 110mm dia bore.

Supply and fix in repair vitreous china squatting pan, 'Orissa' pattern, 630 x 450 mm with integral foot rests including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor (excluding flushing cistern and flush pipe fixed) all as specified and directed.

Supply and fix in repair vitreous china wash down water closet semi-pedestal pattern (anglo-Indian type), white, including PVC sheet cover with fixtures, black/ white closed pattern with flat bottom, connection to drain and to flushing pipe, antisyphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and directed.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white including SS Jet spray (Butterfly) with braided tube 1.50 mtr and PVC seat cover with fixtures, black/ white closed pattern with flat bottom (excluding flushing cistern and flush pipe), including connection to drain (or out going pipe) complete all as specified and directed.

Supply and fix in repair vitreous china wash basin white, flat back, size 550 x 400 mm including 15mm dia fancy type CP pillar tap, 32mm dia flexible waste pipe and fixing with brackets complete all as specified and directed.

Supply and fix in repairs, PVC water closet seat, black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for EWC fixed as in repairs complete all as specified and directed.

Supply and fix in repair PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern low level white with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix unplasticised PVC pipes of pressure rating with all fittings and fixed to walls and ceilings or laid in floors for 15 mm bore of pipe including taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Supply and fix unplasticised PVC pipes of pressure rating with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe including taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Supply and fix in repiars PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fix in repairs PVC waste pipe flexible 32mm or 40mm bore 60cm long for sink or WHB complete all as specified and directed.

Supply and fix in repairs 15 mm dia CP bib cock with flange complete all as specified and directed.

Supply and fix in repairs 15mm bore CP stop cock regular body complete all as specified and directed.

Supply and fix in repair 15 mm dia CP pillar cock complete all as specified and directed.

Supply and fix in repair 15 mm dia CP Angle cock with flange complete all as specified and directed.

Supply and fix in repair two way angle cock with flange complete all as specified and directed.

Supply and fix in repair 5" overhead ABS shower with brass arm 225mm with flange complete all as specified and directed.

Supply and fix in repair health faucet with 1metre SS tube and hook complete all as specified and directed.

Supply and fix in repair Corner glass shelf 300mm complete all as specified and directed.

Supply and fix in repair brass CP Soap Dish complete all as specified and directed.

Supply and fix in repair brass towel rail complete all as specified and directed.

Supply and fix brass towel rack chromium plated Make Prayag/ Jaquar or equivalent all as specified and directed.

Supply and fix in repair chromium plated Wall mixer with L Bend

Supply and fix in repairs CP Centre hole basin mixer complete all as directed.

Material and labour for liquid water proofing compound

Supply and fix Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms)

Hari Construction (BID ID -3117989)