MPLADS

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Sand filling in foundations cost and conveyance of sand and all labour charges for filling watering and ramming etc. complete as per drawing and technical specification clause 305.3.9 & 304 MORD Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Footings

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Pedastal

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns upto GL

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Plinth beam

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Roof beams

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Roof slab of 125mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Stair case waist slab of 175mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Steps

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Lintels

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Sunshades

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab including Overhead charges & Contractor's Profit @13.615% etc.complete but Excluding Seigniorage charges & GST

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Basement

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure

Plastering with CM (1:5) 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For Super structure

Ornamental Plastering with CM (1:5) 8 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For Super structure

Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 20mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, and labour charges such as cutting, bending,placing in position, tying etc. complete including overhead charges and contractor's profit @13.615% but excluding GST.

Cost and supply of MS Grills including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.

Supply and Fixing of best 1st class Teak wood Door size 1.52 x 2.44 mts and frame of 75 x 100mm Thick and Z Hold Fasts 9" and Brass Buthing 5" - 6 Nos and Brass Aldrops 12" - 1 No., Brass Towers Bolts 6"-3 Nos and Brass Handles - 2 Nos with all specified fixtures as per approved design including cost and conveyance of all materials & labour Charges, Overhead Charges and contractor's profit @13.615% but excluding GST.

Supply and Fixing of best 1st class Teak wood Door size 1.20 x 2.10 mts and frame of 75 x 100mm Thick and Z Hold Fasts 9" and Brass Buthing 5" - 6 Nos and Brass Aldrops 12" - 1 No., Brass Towers Bolts 6"-3 Nos and Brass Handles - 2 Nos with all specified fixtures as per approved design including cost and conveyance of all materials & labour Charges, Overhead Charges and contractor's profit @13.615% but excluding GST.

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm) including contractors profit & over head charges but excluding GST & seigniorage charge.

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - for Internal walls

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST for external walls

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Flooring with Ceramic Tiles set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Providing skirting to internal walls to 15 cm height/risers of steps with Nano polished Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .