SR(P) Structural Repairs to Buddhist stupa at Bhattiprolu, Palnadu Dist., A.P.

Amount

Underpinning and cracks stitching the missing/ eroded brick wall surface after scooping out the missing surface area and insert new special bricks of size 45 x 30 x 8 cm in Lime mortar 1:2 in the gap in tune with adjoining layer and texture to the brick stupa including curing etc. complete as directed by the site in-charge.

Filling and Grouting to drum wall area of stupa with Lime mortar 1:2 it includes cost of materials and labour charges etc. complete as directed by the site in-charge.

Filling moorum all around stupa area to overcome the water stagnation includes cost of materials and labour charges etc. complete as directed by the site in-charge.

Demolishing brick work(Removing the damaged tree guards) manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc., complete as directed by the site in-charge.

Dismantling barbed wire or flexible wire rope/Chain linked mesh in fencing(Existing dwarf wall fencing is below the road level due to this village drain water is coming inside the fencing) including making rolls and stacking within 50 metres lead etc., complete as directed by the site in-charge.

CR Masonry for Construction of Dwarf wall to increase the height of existing dwarf wall it includes cost of materials and labour charges etc. complete as directed by the site in-charge.

Providing chain linked mesh (diamond mesh of size 50X50mm, 8 gauge) fencing over dwarf wall with 50x50x6mm iron angles as verticals at every 2.50m c/c fixed in the dwarf wall with 40X40X5mm L Angle alround frame including fabrication charges and painting the grill with two coats of smoke-grey enamel paint after applying necessary iron primer etc. complete complying with standard specification and as directed by the site in charge.

Pointing to CR Masonry with cement mortar 1: 3 including cost and conveyance of all materials and labour charges etc. complete as directed by the site in-charge.

Coping over dwarf wall fencing and Base of the drain line by laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per ISI: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as directed by the site in-charge.

Providing synthetic enamel painting in two coats to Old mild steel grill and MS chain link mesh to avoid rust etc. including cost of paint, Labour charges etc. complete as directed by the site in-charge.

Providing granite stone benches of size 0.60X 0.45x0.15 for legs, 1.50 X 0.45x0.15 for seat including cost, conveyance of all materials, labour charges, quarrying, cutting in to required sizes, assembling, fixing in position etc., complete as directed by the site in-charge.

Cost, supply and installation of prefabricated cement board cabin of size 15x10x8.0 feet (Fabrication specification includes-a) Wall paneling with cement boards with thickness of 50mm (fire, water and termite resistant). b) 2inch GI Square pipes (12kg, rust resistant) .c) two doors (flush door 30mm thickness) with frame of size 6x3 feet including hardware fittings. d)2 nos. Sliding doors with black mirror for windows with frames of size 3x3 feet. f) Paint with 2 coats(1 primer,1 colour coat) with joint finishing and enamel paint for iron items. g) Ceiling with V Board 6 mm thickness (water, fire resistant). h) Roof sheets of 0.50mm thickness. i)3x6feet iron rack for shelves. j) Electrical items includes All wiring shall be concealed and shall be PVC insulated copper wires of ISI quality, suitable for 240 volt, 50 HZ single phase AC power supply. 2.5 mm thick cable for lighting, 5ampswitches with 3pin Sockets, bulk head light above the door, 4mm thick cable for main electrical supply & with MCB protection. Poly cab ISI Mark and includes cost of transportation, labour and all taxes etc. complete. As directed by the site in charge.(As per enclosed drawing.)

Providing drinking water facility for the visitors includes cost, supply and installation of industrial RO (250LPH) plant and blue star water cooler including water cooler Including all taxes etc. complete as directed by the site in-charge.(Please refer Annexure-A)

Providing CNB including cost, conveyance of all materials, labour charges, fixing and fitting in position as directed by the site in-charge..(As per enclosed drawing.)

Manufacture and supply of “Vitreous Enamel” (All Weather Proof) long lasting porcelain base, ceramic coated “Direction Notice Board (DNB)” made out of 16-gauge thick CRCA mild steel sheet, support frame of MSA 50x50x6 mm and enameled in blue back ground and white letters with specified matter in Telugu, Hindi & English with ASI ‘LOGO’ on top left corner, as per approved text. Provided with rust proof galvanized supporting anglestand of size 70x70x8mm, 3350mm long of 1 no per board with nut, bolt and washers & welded hold-past at bottom and embedded in cement concrete in 1:2:4 of size 45x45x60 cm complete. Size of board- 1200mm height x 900 mm width- 1200mm height x 900 mm width- including GST and other applicable taxes etc. complete as directed by the site in charge..(As per enclosed drawing.)

Cost and Supply of Injection Grouting pump (Flow rate 12 lpm, Pump pressure- 6 Bar, Hopper capacity-15Kg, Single phase 220 V, Electrical trolley mounted east to move.) including transportation charges and other charges etc. complete as directed by the site in-charge.

Shifting of Existing lime grinder from Anupu to Bhattiprolu and back it includes cost of labour and transportation charges etc. complete as directed by the site in-charge.

CHINTHADA VENKATA RAO

V SURENDRA NAIDU