Loading
Loading…
Loading…
Tender Value
₹30.9 L
EMD Value
₹61,900
Closing Date
21 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTENANC
12 conditions · 1 needing a document upload
The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
47 conditions · 6 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm
The Bid Security shall be deposited either in cash through the e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non-submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module; uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of aPartnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
DHARMAVARAM - Provision of Electrical Arrangements for Construction of New Crew lobby with all facilities
GTL-EM-51-2026-27~SCOR
GTL-EM-51-2026-27
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹61,900
28 Sept 2026
28 Sept 2026
7 Oct 2026
87 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 30,94,110.9 | ||
| — | Breakup | for details. | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.( sl.no: 1.14 of DSR 2025) | — | — | — | 5,93,900 | |
| — | Breakup | for details. | — | ||
| Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(Sl No.1.17 of DSR- 2025) | — | — | — | 55,400 | |
| — | Breakup | for details. | — | ||
| Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Sl No.1.21 of DSR-2025) | — | — | — | 3,69,300 | |
| — | Breakup | for details. | — | ||
| Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Sl No.1.24 of 1.24 DSR-2025) | — | — | — | 51,500 | |
| — | Breakup | for details. | — | ||
| Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. (Sl No.1.27 of DSR-2025) | — | — | — | 54,220 | |
| — | Breakup | for details. | — | ||
| Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.(Sl No.1.3 of DSR-2025)( consignee inspection) | — | — | — | 4,20,200 | |
| — | 200.00 | — | — | ||
| Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.(Sl No.1.33 of DSR-2025). | — | — | — | 20,800 | |
| — | 6.00 | — | — | ||
| Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.(Sl No.1.57 of DSR-2025) | — | — | — | 4,842 | |
| — | 50.00 | — | — | ||
| Supplying and fixing PVC batten/ angle holder including connections etc. as required. (Sl No.1.58 of DSR-2025) | — | — | — | 6,600 | |
| — | Breakup | for details. | — | ||
| Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.(Sl No.2.2 of DSR-2025) | — | — | — | 8,127 | |
| — | Breakup | for details. | — | ||
| Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(Sl No.2.3 of DSR-2025) | — | — | — | 14,159 | |
| — | Breakup | for details. | — | ||
| Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (Sl No.2.5 of DSR-2025) | — | — | — | 13,512 | |
| — | Breakup | for details. | — | ||
| Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (SI No.2.10 of DSR-2025) | — | — | — | 2,140 | |
| — | 5.00 | — | — | ||
| Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.(Sl No.5.2 of DSR-2025) | — | — | — | 38,290 | |
| — | Breakup | for details. | — | ||
| "LED Down lighter (COB Type) (System lumen efficacy >=120 lm/Watt )Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round / square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.>=0.95, IP20, CRI >80 , UGR (Unified GlareRating) < 19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. ""complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >=120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector."(Sl No.8.5 of DSR-2025) | — | — | — | 4,28,280 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 20A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendment Cat.Nos: 811010 with all connected accessories. | — | — | — | 2,300 | |
| — | 30.00 | — | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in Full Elliptical(FE), Half Elliptical (HE), SemiElliptical (SE), Parabolic /Triangular shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 with its latest amendments. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. The Font size and Board sizes shall be adopted as per site conditions. All Neccasary Clamping arrangements shall be provided as per the instructions of Site supervisors | — | — | — | 71,673.3 | |
| — | Breakup | for details. | — | ||
| Brush Less Direct Current (BLDC) Fan with Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades,30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.(Sl No.9.1 of DSR-2025) | — | — | — | 72,050 | |
| — | 200.00 | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments including laying of cable in the trench and connected and with necassary lugs and terminations at both the ends complete. | — | — | — | 1,03,048 | |
| — | 200.00 | — | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 36,200 | |
| — | 200.00 | — | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 2,400 | |
| — | 400.00 | — | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 57,360 | |
| — | 100.00 | — | — | ||
| Excavation of cable trench in cement concrete bed flooring by using power drill to a depth of 1.0 Mtr and a width of 0.3mtr. After laying the pipe and refilling the trench with excavated earth and undertaking cement concrete bed flooring to its original shape as was prevailing earlier to the satisfaction of Railways site Engineer.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 44,676 | |
| — | 5.00 | — | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 650 | |
| — | 5.00 | — | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92,IEC 60947-3 with necessary terminals suitable for cables upto 25 Sq mm and all necessary accessories complete. | — | — | — | 8,850 | |
| — | 10.00 | — | — | ||
| Supply and Erection of LINNET Aesthetically designed linear mirror LED light 7W Provided with a high output PMMA diffuser for glare free light conforming to IS:10322 of model no. LCL-07-CDL of Crompton make or it's equavalent with all necessary accessories complete as per attached Railway specification. | — | — | — | 9,870 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Hand Dryer as per IS:302-2-30:2007 or latest. | — | — | — | 5,750 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811010 with all connected accessories. | — | — | — | 2,300 | |
| — | 5.00 | — | — | ||
| Provision of mobile Charging Arrangements with following accessories (i)3 x 6 Amps one way modular switch (as perIS 3854:1997) of makes Havells/Legrand/GM/Goldmedal. (ii)3 x International Socket 13/6 Amps of makes Havells/ Legrand /GM/Goldmedal (iii)1 x 16A SP MCB, of Makes:Havells/GM/ Legrand/Goldmedal (iv) 12 module or suitable Plastic Enclosures with Cover plate for Surface Mounting of makes Havells/Legrand/GM/Goldmedal,fixing of charging point on the wall complete including connections with all other connected materials and works. (v) Supply and fixing of 02 No's of dummy plates in the 12 modular plastic encloseure including Fixing of Charging point on the Wall/Pillers/Structure with suitable clamps/ rag bolts etc complete including all other connected materieals and accessories. | — | — | — | 5,405 | |
| — | 5.00 | — | — | ||
| Supply and installation of high quality statinless steel mobile charging stand to provide at staions made stainless steel (2 mm thick)material with dimension 24cm*22cm* 4cm which is light weigt and tough at the same time look bright and elegant with mirror polish with three screw holes to easily fix on wall /pillar structure with suitable clamps/rag bolts etc complete. | — | — | — | 2,000 | |
| — | 10.00 | — | — | ||
| Supply and fixing of BLDC star 200 mm 20W 1600 R P M Exhaust fans including necessary plastering, Massinory work and clamps nuts bolts etc. | — | — | — | 20,580 | |
| — | 1.00 | — | — | ||
| Supply of self contained drinking water cooler of capacity 150 Lrs cooling capacity and 150 Ltrs storage capacity, confirm to IS: 1475 (part-i) 2001 suitable for operation on 230 Volts +10%, 50 Hz single phase AC supply with latest amendments etc... Makes: USHA/BLUESTAR/VOLTAS | — | — | — | 45,579 | |
| — | 1.00 | — | — | ||
| Supply and fixing of ON Delay/Interval timer of Supply Voltage - 200V-240VAC, 50/60Hz Model - 800XU. | — | — | — | 578 | |
| — | 1.00 | — | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. in above junction box. | — | — | — | 971 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendment Cat.Nos: 811010 with all connected accessories. | — | — | — | 2,300 | |
| — | 6.00 | — | — | ||
| Supply, fixing, testing, connecting and commissioning of 2.0 Ton capacity Hi wall split inverter Air conditioner 5 star rated with hermitically sealed Copper Condensor and ISEER 5- 5.5, R- 32 Refrigerant including all accessories & fixing of Outdoor Mounting Stand etc with required lenght of the cables between indoor and outdoor units Note: (1) AC unit supplied to railways must match with the BEE Star Rating valid as on the date of supply. (2)The Product must be registered, on the name of Consignee, with OEM, after successful installation and the firm shall submit the BIS Certificates. | — | — | — | 3,69,000 | |
| — | 6.00 | — | — | ||
| Supply, installation, testing and commissioning of Energy Saver for air conditioning units for 2T Capacity having memory based micro controller, with Dual sensor & display for room and coil temperature, measures room /coil/ ambient temperatures- features A 10-PT programmable menu and a remote to change your set temperature, which constantly analyses the temperature transfer profiles between the air and evaporator coil. (Warranty Period : Upto 30 months from the date of delivery.) | — | — | — | 71,083.2 | |
| — | 6.00 | — | — | ||
| Supply and fixing of wall/floor mounting type Voltage stablizer of V-Guard VG 500 Voltage Stabilizer for AC up to 2 Ton (170 - 270 V) with all connected accessories and works. | — | — | — | 11,880 | |
| — | 30.00 | — | — | ||
| Supply and provision of set of copper pipes i.e. from Indoor to outdoor and outdoor to indoor unit suitable for 1.5-ton/2 ton inverter AC including foam insulation over and above of 3 mtrs. of set of pipes supplied along with AC by OEM as per site requirement | — | — | — | 24,111 | |
| — | 4.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) or latestas advised by the site supervisor with all necessary accessories complete | — | — | — | 13,991.6 | |
| — | 6.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) or latest as advised by the site supervisor with all necessary accessories complete. | — | — | — | 20,386.8 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 63 A 4P MCB C Curve , 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 5,548 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811010 with all connected accessories. | — | — | — | 2,300 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
JPO Digging of cables
ATTACHMENT
HVACSpecification23-236.pdf
ATTACHMENT
FirepreventionGuideline.pdf
ATTACHMENT
LatestCPWDGENSPEC_compressed.pdf
ATTACHMENT
GCC 2022 with Correction Slips
ATTACHMENT
EarthingSpecificationMFEandOther.pdf
ATTACHMENT
Technicalspecifications--9-26.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips._compressed.pdf
ATTACHMENT
CEGETechnicalCircular07-04-2022_compressed.pdf
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
RITESInspection.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
NITIREPSWorksEM-51_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .