Modernization of the APTRANSCO TLC Stores at Kadapa based on Master Plan & Architectural Design: Construction of of PEB Blocks 1 &2, Common Toilets, Watch Tower, Security and Cabin etc., including Facade works, Electrification, Plumbing, CC Roads and Platforms.

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shurbs and trees of girth upto 300 mm removal of stums of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per technical specification clause 201 MORD/Morth, complete for finished item of work as per the directions of the Engineer in Charge.

Levelling by filling with borrowed gravel by mechanical means including cost & conveyance of gravel, depositing the soils in filling areas , spreading soils, breaking clods, sectioning and consolidation with three wheel 8 to 10 MT static Road Roller and 2to4MT Road Roller / hand roller/vibratory roller in the areas between structures ( where ever rolling with 8 to 10 MT roller is not possible) @ OMC to meet requirement as per standard specification , including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per (Payment will be made based on level for finished item of work).

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Providing Sand cushion for foundations and basement in layers, not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost & conveyance of all materials, operational, incidental, labour charges, hire charges of T&P at all leads, lifts etc. complete as per the directions of the Engineer in charge for the finished item of work

Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Plain Cement concrete - Nominal Mix (1:3:6) with 12 to 20mm (50% each) HBG metal with necessary form work including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456) FOR WALLS etc

Plain Cement concrete - Nominal Mix (1:2:4) with 12 to 20mm HBG metal with necessary form work including cost and conveyance of all materials, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Construction of RR Masonry in CM (1:6) with available dismantled RR stone at site including cost and conveyance of all materials, labour charges, water lead , Curing, all leads and lifts, excluding the cost of RR stone etc., complete for finished item of work as per directions of the Engineer-in-charge.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe-500/Fe-500D/Fe-550 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work For SWITCH YARD WORKS

Brick Masonry in CM (1:6) with Fly ash cement/ lime solid blocks with compressive strength not less than 50kg/sqcm confirming to IS: 12894-1990 class 5 of size 225 X 100 X 60 mm of approved quality, including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . For Masonry works below 1.2m height

Plastering to Uneven surfaces of BM, RR /CR, PCC with CM (1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts, curing and without scaffolding complete as per the directions of the Engineer in charge for the finished item of work.

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, curing, without scaffolding complete as per the directions of the Engineer in charge for the finished item of work.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Plain Cement concrete pavement with Nominal Mix (1:2:4) with 40 to 20mm (50% each) HBG metal using concrete mixer laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work) including cost and conveyance of all materials, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456). FOR ROAD PAVEMENT WORK

Construction sawn joint groove (using diamond studded blades) 3 to 5mm wide and dowel bars complying with clause 602.6.5 of specifications for road and bridge works (third revision) published at New Delhi in 1955 by IRC on behalf of Government of India, Ministry of surface transport and as directed in the drawings. the construction joints shall be out as soon as the contract as undergone intial hardening and as hard enough top take take the load of joints sawing machine without causing damage to the slab. the joint ceiling compound shall be of hot poured bitumen type having flexibility resistance to age hardening and due ability of the sealent shall be in accordance with BS5212 (part-2) with all lead and lift including cost and conveyance of all materials etc.,

Supply & Spreading of gravel for formation of Road berms including cost of all materials, all leads and lifts, rolling with hand roller, watering , consolidation etc.complete as per the directions of the Engineer in charge for the finished item of work.

Supplying & fixing of 600 mm dia RCC Hume pipe for culvert with RCC plain ended pipe & collars required confirming to BIS 458/2003 NP – 3 Class including cost & conveyance of all materials, labour charges complete for finished item of work as per the directions of the Engineer-in-charge.

Supplying &fixing of 300mm dia RCC Hume pipe for culvert with RCC plain ended pipe & collars required confirming to BIS 458/2003 NP – 3 Class including cost & conveyance of all materials, labour charges complete for finished item of work as per the directions of the Engineer-in-charge.

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Plain Cement concrete - Nominal Mix (1:3:6) with 12 to 20mm (50% each) HBG metal for bed concrete including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Construction of RR Masonry in CM (1:6) using hard CRS, rough stone other than granite and bond stones (0.16 cum) including cost and conveyance of all materials., labour charges, water lead , Curing, all leads and lifts etc., complete for finished item of work as per directions of the Engineer-in-charge.

Plastering to Uneven surfaces of BM, RR /CR, PCC with CM (1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts, curing and without scaffolding complete as per the directions of the Engineer in charge for the finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe-500/Fe-500D/Fe-550 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work For SWITCH YARD WORKS

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (A) RAFT for Box Culvert

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (B) For Vertical Wall Upto Ground Level for Box Culvert

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (C) FOR ROAD CULVERT SLABS (upto 300 mm thick)(AVG thk 230mm)(STEEL CENTERING)

Dismantling of existing stone masonry in cement mortar, including carefully stacking materials useful for re use and clearing all debris 1.0KM away from the site with all lifts, labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling of existing cement concrete by mechanical means including T&P and scaffolding wherever necessary, sorting the dismantled material. disposal of unserviceable material and stacking the serviciable material with all lifts and lead of 1000m, labour charges, complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris 100M away from the site with labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling the existing RCC by mannual means and carefully stacking the reuseful material at site and disposing the unserviceable metraial to any remote place 1000 mts distance away from site with all leads and lifts includung cost of T&P ,labour and as per the directions of the Engineer-in - charge for finished item of work.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them at departmental stores ( By departmental Vehicle) and disposing the unserviceable metraial away from site premises by contractors own transport as specified and directed by the engineer-in - charge.( Not exceeding 3 sq.m. in area)

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them at departmental stores ( By departmental Vehicle) and disposing the unserviceable metraial away from site premises by contractors own transport as specified and directed by the engineer-in - charge.( Exceeding 3 sq.m. in area)

Dismantling of existing GI sheet roofing including carefully stacking materials useful for re use and clearing all debris 1.0KM away from the site with all lifts, labour charges, T&P complete complete for finished item of work as directed by Engineer - in – charge.

Dismantling steel work in all types of sections of factory buildings, godowns building etc., dismembering by gas cutting at all heights, scaffolding, labour charges, including stacking of all dismantled materials with all lifts and lead upto 1000m etc., complete for finished item of work.

Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction and backfillng and stacking of serviceable material by manual means with all leads & lifts as per technical specification clause 201 MORD/MORTH (A) Girth above 300mm. To 600 mm

Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction and backfillng and stacking of serviceable material by manual means with all leads & lifts as per technical specification clause 201 MORD/MORTH (B) Girth above 600mm. To 900 mm

Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction and backfillng and stacking of serviceable material by manual means with all leads & lifts as per technical specification clause 201 MORD/MORTH (C) Girth above 900mm. To 1800 mm

Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction and backfillng and stacking of serviceable material by manual means with all leads & lifts as per technical specification clause 201 MORD/MORTH (D) Girth above 1800mm. To 2700 mm

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Excavation in Ordinary rock (HDR, soft rock ) (not requiring blasting) whereever necessary for foundations. The rate includes labour charges, cost of tools and tackles, disposing of unuseful excavated materail at all leads and lifts, complete for finished item of work as per directions of the Engineer-in-charge

Providing Sand cushion for foundations and basement in layers, not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost & conveyance of all materials, operational, incidental, labour charges, hire charges of T&P at all leads, lifts etc. complete as per the directions of the Engineer in charge for the finished item of work

Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Construction of RR Masonry in CM (1:6) using hard CRS, rough stone other than granite and bond stones (0.16 cum) including cost and conveyance of all materials., labour charges, water lead , Curing, all leads and lifts etc., complete for finished item of work as per directions of the Engineer-in-charge.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe-500/Fe-500D/FE-550 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and Fixing of 180 GSM LDPE sheet of approved make over slabs and beams centering before placing of Steel reinforcement to avoid slurry leakage and to avoid honeycomb, including labour charges for laying the sheet neatly, cutting and jointing the sheet properly with overlapping of 20cm at joints with Fevicol & Tape and for tying in position with binding wire, removing sheet while removing the centering including cost & conveyance of all materials, tools at all leads and lifts etc complete as per the directions of the Engineer in charge for the finished item of work.

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (A) For FOOTINGS

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (B) For PEDESTALS

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (C) For PLINTH BEAMS

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (D) FOR COLUMNS with Steel scaffolding GROUND FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (E) FOR COLUMNS with Steel scaffolding FIRST FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (F) FOR LINTELS with steel scaffolding GROUND FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (G) FOR LINTELS with steel scaffolding FIRST FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (H) FOR ROOF BEAMS with Steel Centering GROUND FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (I) FOR ROOF BEAMS with Steel Centering FIRST FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (J) FOR SLABS (upto 150mm thick) with steel centering Ground Floor

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (K) FOR SUNSHADES (0.60 M X (0.075M avg thick) X1M Ground Floor (Steel Centering)

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (L) RCC Flooring for Mezzanine flooring

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (M) RCC Vertical wall for Control House Basement, Cable Duct Vertical Walls upto Ground Level

Brick Masonry in CM (1:6) with Fly ash cement/ lime solid blocks with compressive strength not less than 50kg/sqcm confirming to IS: 12894-1990 class 5 of size 225 X 100 X 60 mm of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work .

Brick Masonry in CM (1:6) with Fly ash cement/ lime solid blocks with compressive strength not less than 50kg/sqcm confirming to IS: 12894-1990 class 5 of size 225 X 100 X 60 mm of approved quality, including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . For Masonry works below 1.2m height

Plain Cement concrete - Nominal Mix (1:3:6) with 20 to 12mm (50% each) HBG metal (HAND MIXING) for Fixing hold fasts in Brick walls including cost and conveyance of all materials, labour charges, water lead, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Plain Cement concrete - Nominal Mix (1:2:4) with 12 to 20mm HBG metal over the top of Cable duct wall and Retaining wall including cost and conveyance of all materials, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456).

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt - 2 Nos., 6” D handles - 2 Nos., 10” Aldrop - 1 No., Butt Hinges - 6 Nos, Mortise Lock of approved quality - 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work. for Double leaf Door

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension for finished item of work as directed by Engineer in charge.

Providing and fixing factory made uPVC white colour fixed glazed windows /Ventilators comprising of uPVC multi-chambered frame and mullion (whereever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape&size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion(if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge inclusive of cost of Single / double glass panes and silicon sealant. Fixed windows / Ventilators made of (small series) frame 47x50mm & mullion 47 x 68 mm both having wall thickness of 1.9±0.2mm and single glazing bead of appropriate dimension

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size of 45x75MM (ISI Make) with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control handdrilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. and fixing with 28-30 MM thick solid Wood Polymer Composite (WPC ) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum (ISI Make). shutter will be fixed to the frame using 3 inch hinges. A minimum of 4 hinges will be required including cost of fixtures like 4Nos. Aluminium Butt hinges (IS:205)- 75 mm , 2Nos. MS-Powder Coated Door Handles (IS:208) 150 mm, 1No. Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mm and 1No. MS-Powder Coated Aldrops (IS:2681) 200 mm, cost and conveyance of all materials, labour charges for fixing, Transportation etc., complete for finished item of work and as per the directions of the Engineer-in-charge

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost & conveyance charges of all materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

RCM facia 5cm thick in CM(1:3) for dropwalls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and formwork, lift charges etc.,complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903)

Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing etc complete as per the directions of the Engineer in charge for the finished item of work. (A) For Ground Floor

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing etc complete as per the directions of the Engineer in charge for the finished item of work. (B) For First Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (A) For Ground Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (B) For First Floor

Plastering to Uneven surfaces of BM, RR /CR, PCC with CM (1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts, curing and without scaffolding complete as per the directions of the Engineer in charge for the finished item of work.

Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (A) For Ground Floor

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (B) For First Floor

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (A) For Ground Floor

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (B) For First Floor

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Ground Floor. (A) For Ground Floor

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Ground Floor. (B) For First Floor

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, removing projections using cutter machine applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls upto a height of 3.66m. (A) For Ground Floor

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, removing projections using cutter machine applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls upto a height of 3.66m. (B) For First Floor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (A) For Ground Floor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (B) For First Floor

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (A) For Ground Floor

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (B) For First Floor

Providing and fixing of false ceiling in true horizontal level 600 mm x 600 mm, 15 mm thick Mineral Fibre sheet 600 x 600 of fissured-ANF (Board / Tegular) Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stiched cross tee of size 24 x 27 mm at evry 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete as per the directions of the Engineer in charge for the finished item of work. ( Recommended brands: ARMSTRONG, Insula etc)

Providing stainless steel hand railing with 304 Grade stainless steel sections using 48.26mm OD pipes/ squares as styles/ verticals at required intervels, 48.26mm OD pipes/ squares as hand railing/ top sloped member and 3 Nos 17.145mm OD pipes/ squares as intermediate members or any other hand railing design specified by the Engineer in Charge including fabrication of stainless steel railing works using stainless steel welding rods, buffing, polishing, lacquer finishing for seamless finish including fixing the verticals by drilling the holes in the concrete/ granite/ tiled floor, grouted with suitable Resin anchor grout such as Lockfix-S of Fosroc or any equivalent chemical including cost of all materials and labour charges for finished item of work as approved and directed by the Engineer-In - Charge.

Supply and planting of plants like flowering plants fruit bearing plants etc., including manual excavation of pits of size 0.6x0.6x0.6m., filling the pit with a mixture of red earth, sand, manure in the ratio of 2:1:1 including cost and conveyance of all materials with all leads and lifts including watering the plants for a period of six months, complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parry ware make with WHITE colour glazed with 'S' trap, Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 Litres capacity single Flush and external fixtures complete as per the approved colour and directions of the Engineer in charge for the finished item of work.

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of standard make, Chrome Finish with 7 years warranty including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying & Fixing 550x400 mm- single C.P. Pillar cock Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing Pedestal for wash hand basin (HSW/ Parry/ Earthenware ) make including cost of all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed flat back Bowl urinal basin (Indian type) of size 440x 265x 315mm of HSW/ Parry/ Neycer make including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed URINAL PARTITION (Division Plate) of Hindware /HSW/ Parryware/ Neycer make of size 690mm long and 325mm wide including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 19.05mm dia and 609.6mm long C.P. Towel rod of Ist quality including cost of brackets as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing NP Soap dish heavy type with NP Screws including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing TV Shape mirror with PVC frame size 609.6x457.2mm including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 110mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 110mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 75mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 75mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (A) 34.9 mm OD pipe SDR 13.5

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (B) 28.6 mm OD pipe SDR 13.5

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (C) 22.2 mm OD pipe SDR 13.5

Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work. 32 mm dia Nominal Bore

Supplying and fixing long body C.P. Taps including cost and conveyance, labour charges complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing 101.6 mm dia PVC Nahani Trap/Floor trap of standard make including making connection to PVC pipes/waste water lines with cement concrete base for embedding traps in position, finishing up to floor level with water proof cement plaster with grating at top complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing of 12.7 mm NP stop cock Indian make heavy duty Seiko/ Senior/ Nice/ Senior/ Nice or equivalentincluding cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Construction of 457.2mmx457.2mm brick masonry in CM (1:6) man hole upto 914.4 mm depth and fitted with light weight 457.2 mmX457.2 mm CI frame and cover of 20 Kg weight including cost and conveyance of all materials, labour charges complete as per the directions of the Engineer in charge for the finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with of 2000 liters Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc complete as per the directions of the Engineer in charge for the finished item of work.

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. (A) 19mm / 20mm x 12 mm height

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. (B) 25mm x 12 mm height

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. (C) 30mm/ 32mm x 12 mm height

Supply and fixing of 25 mm outer dia (1.60-1.80) mm thick mediium grade with IS: 9537 part 3 regid PVC pipe (ISI mark) ( Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin makes) concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Wiring with 2 runs of 1.5 Sqmm ISI marked FRSLS/ FRLS-H/ HFFR/ ZHFR PVC insulated flexible copper cables 1100V grade as per IS:694/ 1990 & IS: 17048/ 2018 specifiation for copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi) in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 Module Modular switch of makes Legrand (Allzy)/ Crabtree Verona / Lauritz Knudsen (Formerly L&T)/ HPL/ SchneiderLivia/ GM- (G NINE/ GX) C&S/ Goldmedal (Curve/ Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90 series/ Precision( Series 5)/ Koncept (Samrat/ Qura)/ / Polycab (Levana / IndoAsian/ Pointer/ CPL/Kolors/ Vihan/ Hosper/ Vimal/ DEC (Unicus)/ Fybros/ Infinity/ Elleys (e-soft) , and 3 plate Ceiling Rose of makes: GMG Home/ Gold Medal Olive/ Million Zoom/ Greatwhite Omega/ Koncept/ Vimalopel/ Anchor/ Vihan/ CPL/ Havells Reo/ Elleys with modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of 6A/10A 3 pin 2 Module Modular socket with shutter & 6A/10A 1 way 1 Module Modular switch control of makes:: Legrand (Allzy)/ Crabtree Verona / Lauritz Knudsen (Formerly L&T)/ HPL/ Schneider Livia/ GM- (G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision( Series 5)/ Koncept (Samrat/ Qura)/ / Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vimal/ DEC (Unicus)/ Fybros/ Infinity/ Elleys (e-soft) on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 16A/6A 1 way combi socket modular switch with shutter ( Legrand (Allzy) / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vima make) with 16A/20A 1 way 1 Module Modular switch control on a separate metallic box of size 200x150x60mm made of 18SWG sheet steel box coated with two coats of zinchromate redoxide with 1 or 2 module cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of HID / batten holder / slanting holder (Wipro/G.E./Phillips) in lieu of ceiling rose of light point complete with all connections and all labour charges with 7to9W LED bulb with input voltage 90 to 300V Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Arrt / GoldMedal / Luker/Leo/Orbit /Rhino / GLO LED (for new installation) with all labour charges, Material etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 18" (450 mm) ISI, 900 RPM heavy duty exhaust fan with metallic blades with mark (Crompton / Almounard / Havells Turbo Force/ Halonix/ Krypton makes) including cost and conveyance of all fixtures, fittings, labour for fixing in wall inclding making holein wall with necessary connections at all positions of building complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of 12" (300 mm) ISI, 900 RPM heavy duty exhaust fan with metallic blades with mark ( Crompton / Almounard / Havells Ventil Air-DB makes) including cost and conveyance of all fixtures, fittings, labour for fixing in wall inclding making holein wall with necessary connections at all positions of building complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of 48" (1200mm) Sweep star rated ceiling fan with double ball bearings air delivery more than 200Cum/Min of makes: Crompton HS Plus / Havells ES PLUS/ Orient Energy Star/ Halonix (Zephyr)/ Polycab (Synergy 50 ISI) / G.M. (Air Wave Premium)/ Bajaj - Edge/ Arcline (Glacier) models with suitable down rod covered with flexible pipe, 2 module modular type electronic Stepped type fan regulator ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura)/ Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ imal/ DEC(Unicus)/ Fybros/ Infinity make) with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.

Supply and fixing of 20W, not less than 1100mm length LED batten light and all standard accessories of makes Wipro / G.E. / Phillips / Crompton / Bajaj/ Havells/ HPL/ Halonix on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply, Erection and transportation of 120W LED light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass / temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 100 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec- 3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection a) LUMINAIRE Makes: Syska / GM / C&S/ VIN/Gold Medal /Pharox / Cosmo / Enrich// Renesola / Stanjo / Goldwyn/ Ib LED/ Orbit/ Luker/Trinic/ GLO LED/ Vimal/Transrail /Valmont/Benlo/ Goldwyn/ Lumirise/Sturlite. b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG / LG.. with earth connection with Fixture including cabling and connection, labour charges etc.omplete with fixing on wall with 1m, 40mm dia GI pipe bracket, anti-tilling MS flat, 36/0.30, 2.5 Sqmm flexible copper cable (Finolex / RR kabel / Havells/ KEI/Polycab/Gloster/Goldmedal/GM make) including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of 4 Way SPN DB with IP 30 Protection as per IS:13032 and suitable for 4Nos S.P out goings and for 1 No Incommer etc complete of makes ABB/ Standard / Havells-euro II / C&S / Lauritz Knudsen (Formerly L&T)/ GM / Gold Medal/ Salzer/ Polycab/ Million/ Benlo/ BCH with IP-30 protection suitable for single Phase supply of 40A, DP Isolator of makes as incomer and 10KA-6-32A range SP_ MCBs of make ABB- S200/ Standard / Havells-euro II / C&S / Lauritz Knudsen (Formerly L&T)-Exora/ GM/Gold Medal/ Salzer / Polycab/ Million/ Benlo/ BCH as out-going including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for surface/ flush mounting.

Supply and Run of 2 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution board to Lighting point Board.

Supply and Run 4 of 6.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable of makes :Finolex / RR kabel / Havells/ Fine Cab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ fortune Arrt/ Anchor/ Million/ APAR (Anushaksthi) in the existing pipe for run of Mains from AC panel to 32Amps Main switch as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run 2 of 2.5Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR (Anushakthi) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run 1 of 1.50Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible copper cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run 1 of 2.5Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR (Anushakthi) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run of 1 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building

Providing independent earthing by excavating a trench to a depth of 2.1m in all soils, as per size specified in the data, using 40mm dia 'B' class GI pipe of 2.5m length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing in position 32A 240V SPN ISI marked Rewirable Fuse Switch in SS Enclosure as per IS:13947 of makes: HPL/ Havells/ Standard/ Indo Asian/ Benlo including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of decorative gate lamps to the gate of sub station including cost and conveyance of materials, and labour charges complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 36W Recessed / Surface mounting 2"x2" (600x600mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, constant current driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , with operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of > =90 lumens / watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty (Makes : Surya / C&S / Syska / Enrich / Stanjo / Polycab / Ib LED/ Opple/ Luker/ Orbit/ Trinic / ilite/GLO LED / Vimal/ Akarui/ Million /Fybros /Victoria /Benlo / Goldwyn b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing 4Way TPN Distribution board with IP-30 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going of Makes Standard / Havells-euro II / C&S / L&T/GM /Gold Medal/Salzer/Polycab/Million including internal connection and labour charges for surface / flush mounting etc., complete for finished item of work as directed by Engineer-in-Charge. ( 40A FP Isolator/RCCB/ELCB-1 No for incomer, 10KA-6-32 A SP MCBs-12 Nos for outgoing)

Providing and laying heavy-duty VDF/Tremix concrete flooring for PEB warehouse floors over well-prepared and machine-compacted subgrade, including 100–150 mm thick compacted granular sub-base/WMM layer, polythene vapour barrier, reinforcement with 8 mm dia TMT bars @150 mm c/c both ways placed with proper cover blocks, and laying 150 mm thick M25 grade concrete finished using vacuum dewatering and power trowel process to achieve a smooth, dense, and durable surface. The work shall include groove cutting/expansion joints, edge shuttering, proper levelling, curing, finishing, and all labour, materials, machinery, tools, and accessories complete as per approved drawings and specifications for industrial warehouse usage as directed by the Engineer in charge for the finished item of work.

Supply & Installation of the Pre-Engineered Building (PEB) Structure rigid frames, secondary framing & roofing elements manuf. off-site and assembled on-site. The adhere to industry standards with rigorous quality control measures & inspection procedures throughout the construction process.Light Frame strucure as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply, fixing and installing Pre-painted Galvalume Profile steel sheets wall cladding for PEB Blocks walls above 3.60m heights with 0.50mm thickness, Coating Alu-Zinc coating AZ 150 GSM, Tensile Strength 550 MPA, Paint coating Regular Modified Polyester painting, Painting thickness (Top) 18 to 20 Microns, (Bottom) 5 to 7 Microns, Sheet Width 1.020, Length Maximum 12 Meters with Regular Range Colours, approved profile and shade, fixed over the secondary structural framework with self-drilling screws, EPDM washers, flashings, trims, sealants, and all accessories complete, including proper jointing and sealing for leak-proof performance as per approved drawings and specifications including cost and conveyanc of all materials, labour charges for fixing with Bolts, Washers etc., complete for finished item of work as directed by Engineer - in - charge.

Supplying, and installing insulated roofing sheets consisting of polyurethane foam or similar insulating materials, sandwiched between two layers of metal sheets. The insulation thickness shall be 50mm, ensuring efficient thermal and acoustic insulation. The installation process will follow the provided design, ensuring proper fixing of vertical side coverings with secure jointing and sealing to avoid leakage and as directed by the Engineer in charge for the finished item of work at all levels of building.

Façade structural glazing with st176 saint gobain 12mm with 135mm x 65mm section aluminium powder coated, complete work including installation as per the shade selected by authority and as directed by the Engineer in charge for the finished item of work at all levels of building.

Aluminium composite panels, cladding with 25mm x 25mm aluminium sections fixed into PEB strucrure and silicon joint of standard quality and as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply of fresh air exhaust fan of light duty 250V A.C.50Hz.. 225 mm (9") / 300mm size (12") 1350 R.P.M Metallic body plastic blades, wire mesh, etc., complete as directed by the Engineer in charge for the finished item of work at all levels of building.

GST applicable on total value of above civil works