CA NO CWE/HILLS/PGH/24 OF 2020-21

Amount

Maintenance and complete servicing/overhauling of existing DG Set of capacity 320 KVA including replacement of filters, di-assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / assessories, oiling / greasing of complete moving parts, calibration and resetting of governer by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited unwanted materials including oiling / greasing and repair of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as specified and directed. Note:- (i) Spare parts will be measured and paid seperately under respective items of BOQ. (ii) Make of parts shall be same as per existing make of DG set & parts. (iii) The contractor and rep of Engineer-in-charge shall prepare jointly a list of unserviceable parts after opening the DG Set.

Supply only the following spare part of existing make & size, suitable for DG Set 320 KVA complete all as specified and directed. :- Supply only Rubber hose pipes with fixing clamps

Supply only lubrication oil filter

Supply only fuel filters

Supply only by Pass filters (as per sample), Make-Cumins

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Fan belt (as per sample) Make:- Fanner

Engine gasket.

Lubrication Oil, Make - Castrol Servo.

Air filter

Replacement of Hose pipe, Make - Air Cleaner.

Replacement of Gasket: oil filter

Replacement of Gasket: O -Ring

Replacement of Ring: Seal

Maintenance and complete servicing/overhauling of existing DG Set of capacity 30/20 KVA including replacement of filters, di -assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / assessories, oiling / greasing of complete moving parts, calibration and resetting of governer by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited unwanted materials including oiling / greasing and repair of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as specified and directed. Note:- (i) Spare parts will be measured and paid seperately under respective items of BOQ. (ii) Make of parts shall be same as per existing make (iii) The contractor and rep of Engineer-in-charge shall prepare jointly a list of unserviceable parts after opening the DG Set.

Supply only the following spare part of existing make & size, suitable for DG Set 20/30 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Supply only lubrication oil filter

Supply only fuel filters

Supply only by Pass filters (as per sample)

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Engine gasket.

Lubrication Oil, Make - Castrol Servo.

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Maintenance and complete servicing/overhauling of existing DG Set of capacity 10.4 KVA including replacement of filters,di -assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / assessories, oiling / greasing of complete moving parts, calibration and resetting of governer by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited unwanted materials including oiling / greasing and repair of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as apecified and directed. Note:- (i) Spare parts will be measured and paid seperately under respective items of BOQ. (ii) Make of parts shall be same as per existing make (iii) The contractor and rep of Engineer-in-charge shall prepare jointly a list of unserviceable parts after opening the DG Set.

Supply only the following spare part of existing make & size, suitable for DG Set 10.40 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Supply only lubrication oil filter

Supply only fuel filters

Supply only by Pass filters (as per sample), Make-Cumins

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Fan belt (as per sample) Make:- Fanner

Engine gasket.

Lubrication Oil, Make - Castrol Servo.

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Maintenance and complete servicing/overhauling of existing DG Set of capacity 18.5 KVA including replacement of filters,di -assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / assessories, oiling / greasing of complete moving parts, calibration and resetting of governer by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited unwanted materials including oiling / greasing and reapir of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as specified and directed. Note:- (i) Spare parts will be measured and paid seperately under respective items of BOQ. (ii) Make of parts shall be same as per existing make (iii) The contractor and rep of Engineer-in-charge shall prepare jointly a list of unserviceable parts after opening the DG Set.

Supply only the following spare part of existing make & size, suitable for DG Set 18.5 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Supply only lubrication oil filter

Supply only fuel filters

Supply only by Pass filters (as per sample), Make-Cumins

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Fan belt (as per sample) Make:- Fanner

Engine gasket.

Lubrication Oil, Make - Castrol Servo.

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Replacement of Gasket: O -Ring

Replacement of Ring: Seal

Maintenance and complete servicing/overhauling of existing DG Set of capacity 200 KVA including replacement of filters,di -assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / assessories, oiling / greasing of complete moving parts, calibration and resetting of governer by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited unwanted materials including oiling / greasing and repair of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as specified and directed. Note:- (i) Spare parts will be measured and paid seperately under respective items of BOQ. (ii) Make of parts shall be same as per existing make (iii) The contractor and rep of Engineer-in-charge shall prepare jointly a list of unserviceable parts after opening the DG Set.

Supply only the following spare part of existing make & size, suitable for DG Set 200 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Supply only lubrication oil filter

Supply only fuel filters

Supply only by Pass filters (as per sample), Make-Cumins

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Fan belt (as per sample) Make:- Fanner

Engine gasket.

Lubrication Oil, Make - Castrol Servo.

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Maintenance and complete servicing/overhauling of existing DG Set of capacity 125 KVA including replacement of filters, di -assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / assessories, oiling / greasing of complete moving parts, calibration and resetting of governer by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited unwanted materials including oiling / greasing and repair of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as specified and directed. Note:- (i) Spare parts will be measured and paid seperately under respective items of BOQ. (ii) Make of parts shall be same as per existing make (iii) The contractor and rep of Engineer-in-charge shall prepare jointly a list of unserviceable parts after opening the DG Set.

Supply only the following spare part of existing make & size, suitable for DG Set 125 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Supply only lubrication oil filter

Supply only fuel filters

Supply only by Pass filters (as per sample), Make-Cumins

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Fan belt (as per sample) Make:- Fanner

Engine gasket.

Lubrication Oil, Make - Castrol Servo.

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Decanning of diesel oil from diesel tank of 1000 ltrs capacity in empty barrel, dismantling of inlet & outlet fuel connection, removing all deposited unwanted material from bottom, cleaning the diesel tank with 'K' oil, scraping of old paint from outer side of tank and applying two coats of synthetic enameled paint on outer surfaces of tank, marking & painting of oil levels on tank, making inlet and outlet connection, re-filling of clean decanned diesel in the tank complete all as specified and directed.

Decanning of diesel oil from diesel tank of 20 to 200 ltrs capacity in empty barrel, dismantling of inlet & outlet fuel connection, removing all deposited unwanted material from bottom, cleaning the diesel tank with 'K' oil, scraping of old paint from outer side of tank and applying two coats of synthetic enameled paint on outer surfaces of tank, marking & painting of oil levels on tank, making inlet and outlet connection, re-filling of clean decanned diesel in the tank complete all as specified and directed.

Decanning of diesel oil from diesel tank of 20 to 500 ltrs capacity in empty barrel, dismantling of inlet & outlet fuel connection, removing all deposited unwanted material from bottom, cleaning the diesel tank with 'K' oil, scraping of old paint from outer side of tank and applying two coats of synthetic enameled paint on outer surfaces of tank, marking & painting of oil levels on tank, making inlet and outlet connection, re-filling of clean decanned diesel in the tank complete all as specified and directed.

Dismantling of self starter from DG Set of capacity 320 KVA by unscrewing nut & bolts, disconnecting battery leads, transporting the same to workshop for armature rewinding, taking out burnt out armature winding, cleaning the same and re-winding the same with equal gauge of insulalted copper wires and insulating paper, varnishing and drying etc. including replacing of carbon brushes & lubricating, oiling and greasing bushes/bearings, carrying back the same & fixing it on its original location, connecting battery leads and testing complete all as specified and directed.

S& F in replacement of self starter assembly suitable for existing capacity of DG set 320 KVA including dismantling complete all as specified and directed. Note :- all accessories as nut, bolt washer, wiring etc deemed to be included in quoted rate.

S& F in replacement of self starter assembly suitable for existing capacity of DG set 20 KVA including dismantling complete all as specified and directed. Note :- all accessories as nut, bolt washer, wiring etc deemed to be included in quoted rate.

S&F in replacement of external battery chargering unit suitable for 2x12 Volt 95/150/185 AH battery capacity complete all as directed and approved by GE.

S&F in replacement of Auto Voltage Regulator ( AVR) suitable for DG set of capacity 10 KVA to 25 KVA complete all as specified and directed and approved by GE

S&F in replacement of Auto Voltage Regulator ( AVR) suitable for DG set of capacity 125 KVA to 200 KVA complete all as specified and directed.

S&F in replacement of Auto Voltage Regulator ( AVR) suitable for DG set of capacity 320 KVA complete all as specified and directed and approved by GE.

S&F solonoid switch suitable for existing DG set of capacity 320 KVA complete all as specified and directed.

S&F solonoid switch suitable for existing DG set of capacity 125 KVA to 200 KVA complete all as specified and directed.

S&F solonoid switch suitable for existing DG set of capacity 10 KVA to 25 KVA complete all as specified and directed.

Cleaning of diesel tank of oil fired incinerator by removing all deposited unwanted material from bottom of tank complete all as specified and directed.

Servicing of blower motors of capacity 5 HP by lubricating, oiling and greasing of bearings etc complete all as specified and directed.

S&F photoswitch suitable for oiled fired incinerator of existing size complete all as specified and directed.

M&L for earthing complete with galvanised or steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically (to a depth not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI strip 32 x 6 mm size with nuts, bolts, check nuts, washers with 40 mm GI pipe light grade for protection of GI strip, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick all around, top & bottom watering pipe 20mm bore of GI medium grade with funnel and wiremesh all as shown in electrical plate No. 3 of SSR -2009 Part I and connecting to arthing test point, main switch board and testing on completion including PCC chamber concrete 1:3:6, type C-2 and RCC cover 75mm thick with MS TMT bar 8mm dia @ 150mm c/c both ways in cement concrete (1:2:4), type B-1 complete all as specified and dirfected.

Supply and fixing/laying of galvanized iron strip of size 32x6 mm as earth continuity conductor provided in between earth test point terminal and upto the equipment incl nuts, bolts and washers complete all as specified and directed.

S&F indicating lamp assembly (LED) Red, green, yellow, blue and making necessary connection including taking down existing unserviceable indicating lamp assembly complete all as specified and directed.

Supply only cotton waste white material, complete all as specified and directed.

Supply only broom sweeper (made out of bamboo sticks) complete all as specified and directed.

Supply only caustic soda complete all as specified and directed.

Supply only distilled water (1 ltr bottle) complete all as specified and directed.

Supply only coolant complete all as specified and directed.

Supply only copper battery leads of size 1.5 m long complete all as specified and directed.

Supply only copper battery terminals complete all as specified and directed.

Supply only copper battery leads of size 0.80 m long complete all as specified and directed.

S&F rubber mat suitable for LT 1100 Volts of size 1Mtr x 2Mtr x 10mm thick complete all as specified and directed.

Supply and fixing in Replacement Battery 12V 180Ah including testing complete all as specified and directed.

Supply and fixing in Replacement Battery 12V 150Ah including testing complete all as specified and directed.

Supply and fixing in Replacement Battery 12V 70 Ah including testing complete all as specified and directed.

S&F MCCB 4 pole 100 Amps with breaking capacity 16 KA 415 volt & electric connection etc complete all as specrfied and directed.

S&F MCCB 4 pole 160 Amps with breaking capacity 25 KA 415 volt & electric connection etc complete all as specrfied and directed.

S&F MCCB 4 pole 250 Amps with breaking capacity 25 KA 415 volt & electric connection etc complete all as specrfied and directed.

S&F MCCB 4 pole 500 Amps with breaking capacity 36 KA 415 volt & electric connection etc complete all as specrfied and directed.

S&F wooden box (one side open ended) of size 90x75x45 cm having thickness 12 mm of ply (BWP) extieor grade including locking arrangement with provision of incoming and outgoing cable conductor including fixing arranement on wall with two coats of white emulsion paint over a coat of pink primer complete all as specified and directed.

S&F 10 mm thick MS chequered plate cover for cable duct including 2 coats of synethic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F TPN off load change over switch of capacity 400 Amp including dismantling of existing complete all as specified and directed.

S&F TPN on load change over switch of capacity 630 Amp including dismantling of existing complete all as specified and directed by Engr-in-charge.

Dismantling of existing change over switch including disconnection and connection of LT cable complete and supply fixing of offload change over switch of capacity 200 Amp TPN with enclosure box including handle and other accessories complete all as specified and directed.

Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc 1.5 mtr in depth for LT cables complete including bricks complete all as specified and directed.

Returning, filling in, any type of soil and spreading in layers not exc 25cm thick each layer including watering & well ramming complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 mtr & depositing where directed at a level not exc. 1.5mtr above the starting point complete all as specified and directed.

M&L for brick protection to cable using old size sub class 'B' bricks, laidflat, dry butt jointed, laid lengthwise perpendicular to the axis of cable all as specified and directed.

M&L for dry and clean sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of calbe in trenches complete all as specified and directed. Note:- (Punned thickness shall be measured and paid separatelly)

Supply and laying XLPE insulated , armoured heavy duty electric cable with alumnium conductor, 1100 volts grade, corss sectional area 120 sqmm 3.5 core complete all as specified and directed.

All as per ser item No. 50 above but cross sectional area 150 Sqmm 3½ core complete all as specified and directed.

All as per set item No. 50 above but cross sectional area 185 Sqmm 3½ core complete all as specified and directed.

All as per set item No. 50 above but cross sectional area 240 Sqmm 3½ core complete all as specified and directed.

S & F in replacement GI pipe light grade 100mm bore for cable protection, fixed to pole/ alongwith wall/ floor/ under road/ across the drain or nallaha etc complete all as specified and directed.

All as per ser item No.54 above but size 80mm bore.

S&F of fly wheel assembly of suitable size and compitable to existing diesel genrator set of existing make of capacity 320 KVA including testing complete all as specified and directed.

S&F Electric shock Treatment chart on flex/pvc reflecting sheet with of size 50x100 cm complete all as specified and directed.

M/S Shahjee Fridge Service

SK Traders Sons