Mtc of under JJM NRDWP ARWS RWS RIDF SH Lifting Lowering of different capacity of burnt disorder Submersible pump motor sets of existing SBDTW Schemes along with column assembly under the DWS SubDivision Badarghat during the year 2025-26 Gr I.

Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineering-in-charge.

Supplying & fitting fixing of single phase starter panel unit 3HP capacity comprise with 2 pole conductor,over load relay capacitor,volt meter,Ammeter of BCH/L&T make with necessary copper wire etc.complete as per direction of the Engg-in-charge.

i) 32 Amps

Supplying and fitting fixing M.S Pennal Box having size 75cm x 60cm with 4 way slope roof of 18G/1.25mm MS Sheet with front shutter (double door with proper looking arrangement fitted with 4 Nos. 50 x 50 x 5 mm MS angle of 1.60 mtr long in/c providing and fitting wooden board inside box having size 70 cm x 70 cm x 1 inch thick for all the electrical features like main switch,starter and electrical meter box complete in/c cost of necessary painting with wpoxy paint two more coat over steel priming coat as per direction of Engg-in-charge.

Providing and fitting fixing GI pipe (Medium class) confurming to IS:1239 for column pipe assemble for installation of submerssible pump motor as per direction of the Engineering-in-charge. A) 40 mm NB

b) 32 mm dia

Supplying & Installation of water lubricated submersible pump or Duke make (Modal No.DSP4RFH05) having capacity 1500GPH at total head of 45mtr. Coupled with submersible meter 2HP suitable for 240 volts (+10% verification) single phase 50HP. AC supply DOL starting method to run at 2880RPM along with 35 mtr. 2.5 sqm,PVC and 40 mm dia GI Pipe upto 100 ft (30 mtr) etc. complete as per direction of the Engg-in-charge (Required 40 mm dia GI Pipe will be supplied by the Deptt. at free of cost)

Supplying & Installation of water lubricated submersible pump or Duke make (Modal No.DSP4RFH05) having capacity 2000GPH at total head of 45mtr. Coupled with submersible meter 3 OHP suitable for 240 volts (+10% verification) single phase 50HP. AC supply DOL starting method to run at 2880RPM along with 35 mtr. 2.5 sqm,PVC insulated 3(three) core flat copper in/c fitting fixing & lowering 40 mm dia GI Pipe upto 100 ft (30 mtr) etc. complete as per direction of the Engg-in-charge (Required 40 mm dia GI Pipe will be supplied by the Deptt. at free of cost)

Labour charges for lifting of 2/3 HP submerssible pump motor in/c column pipe assembly by chain pulley block as per direction of the Engg-in-charge.

Labour charges for lowering of 2/3 HP submerssible pump motor in/c column pipe assembly by chain pulley block as per direction of the Engg-in-charge.

Providing and fixing G.I Full way valve as per CPWD specification and direction of the Engineer-in-Charge. A) 40 mm dia

Providing and fitting fixing with PVC insulated 3 core flat copper cable conforming to relevent IS code for Submerssible motor with all necessary equipement and fittings as required as per specification and direction of the Engineering-in-charge. i) 2.50 Sqm