Providing and laying water supply pipe line from pump house to Arty toilet SOs Mess MI room and 120 jawan Barrack WW toilet at BSF Campus I under SHQ BSF BHUJ

Amount

Providing and fixing high density polyethylene (HDPE) pipes,having stability for 6 KG pressure water supply including all PVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching (average depth 900 mm), refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal outer dia Pipes

Making connection of CPVC distribution branch with HDPE main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 63 mm nominal bore

Providing and fixing polyvinyl chloride gate valve of approved quality :25 mm nominal bore

Providing and fixing polyvinyl chloride gate valve of approved quality :63 mm nominal bore

Providing and fixing PVC air valve of approved quality with bolts, nuts, rubber insertions,, tail pieces,tapers etc complete . :50 mm dia

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore

M/S Kanhaiyalal pandey