Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.5 LAccepted-AOC | 1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | DHARIYA MARINE ENGINEERING SERVICES L1 |
|---|---|---|---|---|
| 1.01 | Existing FRP surface must be abraded with at least 100 grit sand paper so that the topcoat /gelcoat will adhere. All surfaces should be clean & dust free, wipe with solvent and allow to dry. Apply topcoat / gelcoat with the required colour pigment, complete the work as per the direction and satisfaction of Engineer incharge of the work / department officials | 44.96 | sqm | 1,413.96 ₹63,575.88 Lowest |
| 1.02 | Clean and Fiber the damaged portion of the hull / any other portion of the vessel by good-quality fiber materials in two layers after proper surface preparation, finish and colour as per the direction and satisfaction of the Engineer in charge of the work / departmental officers. | 5.48 | sqm | 2,775.41 ₹15,209.25 Lowest |
| 1.03 | Clean and Fiber the various portion of the vessel by good quality fiber materials in four layers after proper surface preparation, finish and pigment colour as per the direction and satisfaction of engineer incharge of the work / departmental officers. | 3 | sqm | 3,098.76 ₹9,296.28 Lowest |
| 1.04 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | 4 | sqm | 5,666.79 ₹22,667.16 Lowest |
| 1.05 | Supply and replace damaged deck plywood with a new 18 mm marine plywood conforming to IS:710 as per the direction and satisfaction of the engineer in charge of the work / departmental officers. (The rate includes all material and labour charges.) | 5.48 | sqm | 2,980.13 ₹16,331.11 Lowest |
| 1.06 | Demolish the old, damaged portion of the deck plywood and FRP lamination without further damaging any other components in the vessel as per the direction and satisfaction of the engineer in charge of the work / department officials | 4.23 | sqm | 1,969.26 ₹8,329.97 Lowest |
| 1.07 | Replace the old damaged rubber rollers of the boat trailer assembly with new rollers of the existing dimension and specification as per the direction and satisfaction of the engineer in charge of the work / department officials | 16 | Nos | 3,092.34 ₹49,477.44 Lowest |
| 1.08 | Supply and install new side curtains of Nylon Tarpaulin sheets of 550 GSM at both sides and aft of the vessels by replacing existing damaged ones as per the direction and satisfaction of the engineer in charge of the work / department officials | 13.6 | sqm | 1,118.26 ₹15,208.34 Lowest |
| 1.09 | Supply and install approved Sun Control film with maximum Visible Light Transmission, Low Reflection, Solar Heat Reduction, UV Light Rejection, and Glare Reduction properties as per the direction and satisfaction of the engineer in charge of the work/department officials. | 4.18 | sqm | 1,737.03 ₹7,260.79 Lowest |
| 1.10 | Supply and installation of anti-slip rubber mat in the rest area in deck as per the direction and satisfaction of the engineer in-charge of the work/ department officials | 7.98 | sqm | 1,344 ₹10,725.12 Lowest |
Tender Value
₹3.4 L
EMD Value
₹8,410
Closing Date
8 Dec 2025, 4:00 pmClosed
Joint Director
O/OJoint Director, Hydraulic Research, KERI,Peechi
Repairs and maintenance of survey boat and trailer
2025_Irrig_820739_2
03/JD-HYR/2025-2026
Open Tender
Miscellaneous Services
Item Rate
45 days
Peechi
Please refer Tender documents
10 documents required · 10 mandatory
₹800
Yes
₹8,410
Yes
13 Jan 2026
1 Dec 2025
9 Dec 2025
1 Dec 2025
8 Dec 2025
1 Dec 2025
Amount
Existing FRP surface must be abraded with at least 100 grit sand paper so that the topcoat /gelcoat will adhere. All surfaces should be clean & dust free, wipe with solvent and allow to dry. Apply topcoat / gelcoat with the required colour pigment, complete the work as per the direction and satisfaction of Engineer incharge of the work / department officials
Clean and Fiber the damaged portion of the hull / any other portion of the vessel by good-quality fiber materials in two layers after proper surface preparation, finish and colour as per the direction and satisfaction of the Engineer in charge of the work / departmental officers.
Clean and Fiber the various portion of the vessel by good quality fiber materials in four layers after proper surface preparation, finish and pigment colour as per the direction and satisfaction of engineer incharge of the work / departmental officers.
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
Supply and replace damaged deck plywood with a new 18 mm marine plywood conforming to IS:710 as per the direction and satisfaction of the engineer in charge of the work / departmental officers. (The rate includes all material and labour charges.)
Demolish the old, damaged portion of the deck plywood and FRP lamination without further damaging any other components in the vessel as per the direction and satisfaction of the engineer in charge of the work / department officials
Replace the old damaged rubber rollers of the boat trailer assembly with new rollers of the existing dimension and specification as per the direction and satisfaction of the engineer in charge of the work / department officials
Supply and install new side curtains of Nylon Tarpaulin sheets of 550 GSM at both sides and aft of the vessels by replacing existing damaged ones as per the direction and satisfaction of the engineer in charge of the work / department officials
Supply and install approved Sun Control film with maximum Visible Light Transmission, Low Reflection, Solar Heat Reduction, UV Light Rejection, and Glare Reduction properties as per the direction and satisfaction of the engineer in charge of the work/department officials.
Supply and installation of anti-slip rubber mat in the rest area in deck as per the direction and satisfaction of the engineer in-charge of the work/ department officials
Supply fabricate and install a locking arrangement for keeping the wheelhouse door in open condition with a Stainless Steel chain and hook in the vessel as per the direction and satisfaction of the engineer in charge of the work/department officials
Supply, fabricate, and install a new single bitt bollard of Stainless steel SS316 grade having a 3-inch diameter and 8-inch height with a square base of 6-inch x 6-inch by replacing the existing damaged single bollard at the front side of the boat with adequate stainless steel fasteners as per the direction and satisfaction of the engineer in charge of the work/department officials.
Supply, fabricate, and install a new double bitt bollard of Stainless steel- SS316 grade, having a 2-inch diameter and 4-inch height with a square base of 4-inch x 4- inch at the sides of the boat, with adequate stainless steel fasteners as per the direction and satisfaction of the engineer in charge of the work/department officials.
Supply, fabricate and install new Stainless steel SS316 grade 0.5-inch Sch-5S Pipe handrails at the bow of the vessel by replacing the damaged ones as per the direction and satisfaction of the engineer incharge of the work /department officials
Supply and install new 12 volt DC powered submersible Bilge pump with required connections, hoses and control switches, complete the works as per the direction of department officials
All the Electrical Systems and installations like lights, Horn, Navigational Lights, Search lights, Windshield Wipers, Electrical switches, Fans, electric cables etc are to be inspected, repair works to be carried out, and all the electrical installations to be made operational, Damaged items/spares are to be supplied by the department. All works to be completed as per the direction and satisfaction of the Engineer in charge of the work / department officials.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm
Repainting the KIV Registration Number, Port of Registry, draft marks, plimsoll mark, Vessel Name, Name of Department, etc, with approved colour, in the vessel as per the direction and satisfaction of the engineer in charge of the work/department officials
The complete surface area to be painted in the vessel to be buffed and cleaned thoroughly as per the direction and satisfaction of the engineer in charge of the work / department officers
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1376886.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
Affidavit.pdf
Tender Documents • 0.02 MB
Agreement.pdf
Tender Documents • 0.13 MB
BOQ_1376886.xls
BOQ • 0.28 MB
biddoc.pdf
Tender Documents • 0.25 MB
NIT.pdf
Tender Documents • 0.02 MB
Epaymentform.pdf
Tender Documents • 0.01 MB
ipact.pdf
Tender Documents • 0.01 MB
FOT.pdf
Tender Documents • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .