Call for Supply of Various Type of Survey Work for Consruction Work, Repair Work etc For Gondia And Goregaon Taluka

Lead Statement Of MATERIAL FOR GONDIA TAH.FOR MREGS WORK

Items No 68A Providing and Fixing RCC Boudary/Guard/Chain age Blocks of size 75 x 20 x 20 cm including excavation and fixing in a block of 45 x 45 x 45 cm in M-15 Concrete With Oil painting of two

ITEM NO. 68 B :- Providing and fixing RCC Km / half km / submergence boundary blocks of size 95 x 20 x 20 cm including excavation and fixing in a block of 45 x 45 x 45 cm in M-15 Concrete with oil painting of two coats, lettering etc. complete as directed. (Height of stone above GL 60 cm.)

ITEM NO. 69 :- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer-in-Charge.

Item No. 84 :- Double leveling using Auto level to connect Geodetic Trigonometrically survey, bench mark and establishing permanent bench mark at Dam site at place along the canal alignment, submergence and in command area etc complete, as directed. (Excluding cost of B.M. structure)

Item No. 85 :- Block contour survey of 10m x 10m grid (Not less than 121 raw data points distributed uniformly over a Hector) for irrigation projects using digital state of art Total Station / DGPS, including transfer of entire data to computer system in different geo referential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. The test print of the drawing shall be approved by Engineer-in-charge and the same shall be delivered in a CD format as well as hard copy in six numbers including one print on tracing paper, as directed.

Item No. 86:- Block contour survey of 15 m x 15 m grid (Not less than 64 raw data points distributed uniformly over a Hector) for irrigation projects using digital state of art Total Station / DGPS, including transfer of entire data to computer system in different geo referential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. The test print of the drawing shall be approved by Engineer-in-charge and the same shall be delivered in a CD format as well as hard copy in six numbers including one print on tracing paper, as directed.

Item No. 87:- Block contour survey of 20m x 20m grid (Not less than 36 raw data points distributed uniformly over a Hector) for irrigation projects using digital state of art Total Station / DGPS, including transfer of entire data to computer system in different geo referential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. The test print of the drawing shall be approved by Engineer-in-charge and the same shall be delivered in a CD format as well as hard copy in six numbers including one print on tracing paper, as directed.

Item No. 88:- Block contour survey of 30m x 30m grid (Not less than 25 raw data points distributed uniformly over a Hector) for irrigation projects using digital state of art Total Station / DGPS, including transfer of entire data to computer system in different geo referential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. The test print of the drawing shall be approved by Engineer-in-charge and the same shall be delivered in a CD format as well as hard copy in six numbers including one print on tracing paper, as directed.

Item No. 89:- Block contour survey of 60m x 30m grid (Not less than 15 raw data points distributed uniformly over a Hector) for irrigation projects using digital state of art Total Station / DGPS, including transfer of entire data to computer system in different geo referential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. The test print of the drawing shall be approved by Engineer-in-charge and the same shall be delivered in a CD format as well as hard copy in six numbers including one print on tracing paper, as directed.

Item No. 90:- Block contour survey of 150m x 30m grid (Not less than 5 raw data points distributed uniformly over a Hector) for irrigation projects using digital state of art Total Station / DGPS, including transfer of entire data to computer system in different geo referential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. The test print of the drawing shall be approved by Engineer-in-charge and the same shall be delivered in a CD format as well as hard copy in six numbers including one print on tracing paper, as directed.

Item No. 91 :- Carrying out line survey with digital state of art Total Station for fixing FRL / HFL including C/s survey with levels at 20m interval/ survey for 'L' section of alternative Dam site and 'L' section of river 1Km u/s 1Km D/s of alternative Dam site etc complete including station, including transfer of entire data to computer system in different geo referential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. The test print of the drawing shall be approved by Engineer-in-charge and the same shall be delivered in a CD format as well as hard copy in six numbers including one print on tracing paper, as directed.

Item No. 92 :- Survey for main canal, branches, distributaries with digital state of art Total Station on falling contour including investigation of alternative line, taking falling contour fixing canal line, taking 'L' section and cross section on final line and distributaries survey including transfer of entire data to computer system in different geo referential layer/ themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval and scale. Absolutely linear survey for all types of canals (Length of survey for L-section and cross sections to be measured separately for payment) etc complete, as directed. (Excluding fixing apex/ chain age stones)

Item No. 93 :- Preparation of detailed construction plan for pipe distribution network system including necessary command survey, linear survey for pipe laying, chalk planning, designing of pipe network, and preparation of estimates, as directed.

Item No. 94:- Providing permanent bench mark dressed stone of basalt, granite or gniess of size 30cm X 30cm X 45cm at least 15cm below the ground and embedding it to a depth of 30cm in grade M-15 in situ concrete of size 90cm X 90cm X 60cm deep over 1M deep foundation concrete of grade M-10 including excavation, concrete, providing and fixing dressed stone and backfilling the pit up to ground level with sand etc complete, as directed.

Item No. 95 :- Fixing precast RCC alignment blocks (Pillar) on alternative dam site finally approved of size 900 x 175 x 100 mm at 90 M interval including fixing in 1:3:6 (600 x 450 x 450mm) cement concrete, excavation, backfilling and coloring etc, as directed. (0.75 kg steel)

Item No. 96 :- Supplying labour for Double leveling to connect Geodetic Trignometrical Survey Bench Mark and establishing the Permanent Bench Mark at Dam site at place along the canal alignment submergence and in command area etc, as directed. (Excluding cost of P.B.M. structure)

Item No. 100:- Excavation for taking trial pits on final alignment of dam and canal at specified interval and in Nalla-bed of size 2.00 x 2.00 x 2.50mtr. in length, breadth and depth respectively or size as may be directed by Engineer In charge including backfilling trial pits etc complete, as directed.

Item No. 104:- Cleaning cutting thorny shrubs bushes, grass with 15m. lead and all lifts etc. complete as directed.

Sarvesh Construction Company

Lalitkumar Yashwantrao Badwaik