Increasing height of compound wall with GI Grill and providing and laying internal CC Road and Paver block and kerb wall at Kandla MCC Station.

Amount

Dismantling Of suport angle/Barbed wire/coping

Dismantling barbed ire or flexible wire rope in fencing including making rolls and stacking with 50mtr

By back of dismantling material like as barbed wire

Dismantling Of suport angle

By back of dismantling material like as barbed wire

Dismantling old coping compound wall as directed at site without damaging other parts of compound wall including stacking of serviceable materials and disposal of unserviceable materials within a lead of 500 mtr. cost of supply of all labours, tools & plants, scaffolding and all other charges etc. complete.

Earth work in excavation by mechanical means (hydraulic excavator ) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as10 sqm on plan) inluding getting out and disposal of excavated earth lead upto 50m lift uotp1.5m, as directed by Enginner in charge.

Dry stone packing under foundation using soling stone of approved quality and size including properly hand packed, filling interstices with local sand /moorum and consolidating with hand rammers to the required compaction including spreading, watering and mixing binding materials, earth or moorum etc including the cost of all materials, labours, tools and plants and all other charges etc complete as directed.

Supplying and filling in plinth with river sand under floors, including watering, ramming, consolidating and dressing complete.

Supplying and filling in plinth with moorum under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) 150mm thick base layer of road including batching, mixing, laying, compacting in layers with rammer and as directed, curing & cost of centring and shuttering, supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) 125mm thick base layer of road including batching, mixing, laying, compacting in layers with rammer and as directed, curing & cost of centring and shuttering, supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and laying precast cement concrete factory made kerb stone of M-30 grade cement in position to the level required line level and curvature jointed with cement mortar 1:3)1 cement : 3 sand) including making joint with or without

Providing & laying at per level factory made pavor block M-30 grade cement, made by table vibratory method using PU mould, laid in requird colour & pattern over 50mm thick compacted bed of ourse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand & cuting of paver bolcks as per required size & pattern, finishing and sweeping extra sand, all complete as per manufacturers specification and direction of engineer incharge (80mm thick cement concrete paver block of M-30 grade with approved colour design and pattern)

Providing & laying roof insulation with 40mm thick impersive spread closed cell free rigid polyurethine form over a deck insulation confirming

Synthetic enamel paint to coat & under a coat of suitable shed with ordinary paint of approved

C.C block(1:3:6) masonry in surrounding compound wall for increasing height in cement mortar of mix 1:5 (1 cement: 5 river sand) with approved size, shape & quality of bella stone as directed including cost of supply of all labours, materials, tools & plants, scaffolding and all other charges etc. complete.

Providing and laying CC 1:1.5:3 for coping (1 cement: 1.5coarse sand: 3graded stone aggregate of 20mm nominal size) as directed & as described as per condition at site including batching, mixing,laying,curing,shuttering, centring and the cost of all materials, labours, tools & plants, scaffolding all other charges etc. complete.

Supplying & placing TMT steel( TATA/SAIL/VIZAG) reinforcement of approved 1st quality in position for R.C.C. work including straightening, cutting, bending, fixing and binding with approved 1st quality binding wire as per drawings & as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

18mm thick Cement Plastering to CC Block masonry with cement mortar (1 : 4 ) ( 1 cement : 4 sand ) and rackingout joints as directed, including the cost of all materials, labours, tools & plants, scaffolding curing etc., complete.

Providing & laying 1st quality ceramic-vetrified floor/skirting tiles of size 600x600x10mm thickness for flooring of approved make like NITCO, Orient, Somany, Kajaria ,bell etc.Conforming to IS of apprved colours as white, ivory,grey, fume red brown laid on 20mm thick bed cement mortar( CM) 1:4 for foor tiles and 12mm thick bed of cement mortar( CM) 1:3 ( 1 cement : 3 coarse sand) for dado tiles, Including jointing with white cement mixed with pigment of of matching shade complete.

Providing & laying prepolished granite stone on the old flooring 20mm(ovg) thick of approved quality & colour laid over a bed of CM 1:3 (1 cement: 3 River sand) of thickness 20mm(avg) pointing with white cement slurry after removal of existing floring including the cost of Replastering in CM 1:3, rubbing, polishing, washing, cutting, laying, fixing, leveling, maintaining gradient jointing, after removing the old flooring & preparing the surface fof providing granient jointing, after removing the old flooring & preparing the surface for providing granite stone etc. as directed & as described as per condition at site including the cost of all materials, labours tools & plants and all other charges etc. complete.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels, as directed & as described as per condition at site including the cost of all materials, labours tools & plants and all other charges etc. complete.

Providing and fixing window having extruded alluminium colour power coated section frame main outer size 63.50X38.10X1.95 mm (jindal Section No.4605 @ wt 1.094 kg/Rmt) horizontal Two Track member size 61.85mm X31.75mm X1.20mm (of Jindal section No. 8758 @ Wt. 0.659 Kg/ mt) with sliding shutters of Horizontal member size 40mm X18mm X1.29 mm(of Jindal section No.8949 @wt. of 0.456 kg./mt) vertical member of size 40mm X18mm X1.29 mm( of Jindal section No. 8947 @wt.of 0.456 kg/mt,/ section 8948 @Wt.bronze colour tinted float glass with powder coated alluminium fitting and fixtures and transparent silicon sealant glass fixing to frames as per detail etc.

Fram main member (63.50x38.10x1.95mm)

Shutter (40mmx18mmx1.29mm)

float glass panes 5.50mmthicness

Providing 16mm dia Mild steel rods/Grill to the window frame as directed including cutting the bars to suitable length, straighting, drilling holes in the wooden frame and fixing the rods in line and level(100mmC/C) etc complete including cost of all matierials, labour, tools and plants etc complete as directed.

Apex ultima two coats over a coat of primer of approved brand and manufacturer and of approved colour on new wall surfaces to give an even shade after throughly brushing the surface free from mortar droppings and other foregin matter,cleaning and also including preparing the surface even sand papered smooth including supply of all materials,tools & plants,labour and all other charges etc., complete.

Providing & applying white cement based putty of average thicness 1mm ,of approved brand ( birla white/JK Cement) or any approved brand and manufuctures over the plastered wall surface to preper the surface even and good for smooth with applying putty over one coat primer of Inspection Quarter with approved brand after preparing the surface good for applying the primer as directed & as described as per condition at site including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Applying two coats of Distempering on the inside painted wall surfaces with oil bound washable distemper of approved quality (Berger / Asian brand or equivalent of 1st quality) & colour , even shade with a coat of primer wherever required at all heights and as directed & as described as per condition at site after cleaning and preparing the surface good for distempering including the cost of all materials ,labour ,tools & plants , scaffolding etc., complete.

Providing and fixing main gate with new GI pipe as per approved drawing with heavy duty ' C' Class GI pipe of 50 mm dia for frame & with heavy duty ' C' Class GI pipe of 25 mm dia for verticals including hold fasts, fixing in walls,hinges, GI clamps, welding/ threading etc., and painting of pump house gate with S.E.paint two or more coats over a coat of primer of approved 1st qualty, brand, manufacture, colour, to give an even shade and as directed & as described as per condition at site including the cost of all materials, labours, tools , plants, scaffolding and all other charges etc. complete.(As per drawing )

S.E. Painting with two coats to MS grill and main gate for all heights with approved paints of first quality and colour after removing worm out cement by scapping and applying one coat of zinc chromate as directed at site, including the cost of all materials, labours, tools & plants, necessary safty belt etc complete

Supply & fixing of MS angle board size 15'00'' X 4'6'' and MS leg 15 height with 14mm guage G.I. sheet welding with 80mmx80mmx8mm M.S angle frame, one side fixing of 3mm acrylic sheet, Vinyl printing (Sticker type)with printing & fixing writing/ designing name plate board like departmental logo, technical details, Fixing two LED(30watt) light with cover and stand or any other details which decided by the Directorate of Lighthouses & Lightships,including cost of all materials, labours, tools & plants, welding , grinding to give smooth finish charges and Excavation for foundation, P.C.C.(1:3:6), C.C.1:2:4 as directed etc all other charges etc. complete as directed. ( design board with aestheticaly good with curves and other fittings.( 3 boards for three different languages, Hindi,English & Gujrati)

Providing and Fixing of PVC pipe weep hole 75mm dia Heavy duty as per drawing and as directed at site including cost of all materials, labours, tools & plants etc., complete.

Providing & Fixing granite plaque 20mm thick (Size 8'9" X 4'00" )with engraving letter/emblemes including cost of all materials, labours, tools & plants, levelling, polishing etc and other charges complete. (Gujarati,Hindi & English)

Cleaning of site after completion of work as directed, Supply of all materials, labours, tools & plants and all other charges etc. complete.

Sardar Construction

Shri Murjibhai Construction Company

TIRUPATI DEVELOPERS