Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC | ₹21.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹36.2 L+₹15.1 L (71.8%)Rejected-AOC | ₹36.2 L+₹15.1 L (71.8%) | L2 | Rejected-AOC L2 |
| 3 | L3₹48.7 L+₹27.6 L (131.0%)Rejected-AOC | ₹48.7 L+₹27.6 L (131.0%) | L3 | Rejected-AOC L3 |
| 4 | L4₹87.3 L+₹66.2 L (314.3%)Rejected-AOC | ₹87.3 L+₹66.2 L (314.3%) | L4 | Rejected-AOC L4 |
| 5 | L5₹2.3 Cr+₹2.1 Cr (1000.1%)Rejected-AOC B71 AKSHAY MITTAL INDUSTRIAL CO OPERATIVE SOCIETY BUILDING NO 5 ANDHERI KURLA ROAD MAROL MAROL ANDHERI EAST MUMBAI MAHARASHTRA 400059 | MUMBAI SUBURBAN | MAHARASHTRA | 400059 | ₹2.3 Cr+₹2.1 Cr (1000.1%) | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | TILE MARINE L1 | JASH MARINE SALES & SERVICES L2 | AFFORD MARINE CONTROLS PVT.LTD L5 | GEARS & WHEELS L4 | ALL TECH MARINE HYDRAULICS L3 |
|---|---|---|---|---|---|---|---|---|
| 2.00JOBS WORKS ON HOSE HANDLING CRANE (SERVICE COST) | ||||||||
| 3.00 | RETURN FILTER CARTRIDGE FILTER DELIVERY STRAINER TO CLEAN. | 1 | Set | 20,000 ₹20,000 | 20,000 ₹20,000 | 8,000 ₹8,000 | 12,000 ₹12,000 | 5,800 ₹5,800 Lowest |
| 4.00 | MAIN HYDRAULIC P/P TO DISCONNECT TRANSPORT TO W/SHOP OVERHAUL AND TRANSPORTED BACK ON BOARD AND REINSTALL AS THE ORIGINAL. | 1 | Set | 76,000 ₹76,000 Lowest | 97,200 ₹97,200 | 2,60,000 ₹2,60,000 | 5,86,000 ₹5,86,000 | 3,80,000 ₹3,80,000 |
| 5.00 | SLEWING / HOISTING HYDRAULIC MOTOR TO DISCONNECT TRANSPORT TO W/SHOP OVERHAUL AND TRANSPORTED BACK ON BOARD AND REINSTALL AS THE ORIGINAL. | 1 | Set | 72,000 ₹72,000 | 1,25,000 ₹1,25,000 | 60,000 ₹60,000 Lowest | 2,80,000 ₹2,80,000 | 4,28,000 ₹4,28,000 |
| 6.00 | CONTROL VALVE ASSEMBLY TO DISCONNECT AND OVERHAUL. | 1 | Set | 28,000 ₹28,000 Lowest | 72,200 ₹72,200 | 78,000 ₹78,000 | 2,80,000 ₹2,80,000 | 94,500 ₹94,500 |
| 7.00 | SLEWING REDUCTION GEAR BEARING TEETH AND ROLLER CABLES JIB FOOT CYL. AXLES AND HOISTING WINCH BRG. LUBRICANTS TO RENEW. | 1 | Set | 26,000 ₹26,000 Lowest | 65,700 ₹65,700 | 6,23,610 ₹6,23,610 | 3,60,000 ₹3,60,000 | 3,95,600 ₹3,95,600 |
| 8.00 | JIB CYLINDER AND RAM ASSEMBLY TO REMOVE TRANSPORT TO SHOP & O’HAUL SEALS (VENDOR – SUPPLY) TO RENEW. JIB CYLINDER/RAM ASSEMBLY TO TRANSPORT BACK ON BOARD AND FITTED BACK IN PLACEAS THE ORIGINAL. CHECK JIB FOOT BEARING . | 1 | Set | 1,80,000 ₹1,80,000 | 1,25,000 ₹1,25,000 Lowest | 21,09,600 ₹21,09,600 | 2,50,000 ₹2,50,000 | 5,90,000 ₹5,90,000 |
| 9.00 | JIB FOOT BEARING IF DAMAGED TO BE RENEWED (VENDOR SUPPLY). | 1 | Set | 12,000 ₹12,000 Lowest | 1,45,200 ₹1,45,200 | 22,80,960 ₹22,80,960 | 2,00,000 ₹2,00,000 | 3,60,000 ₹3,60,000 |
| 10.00 | TO RENEW ALL FLEXIBLES & ADAPTORS WHICH ARE WEATHER EXPOSED/ CORRODED & RENEW ACCORDINGLY. TO COVER ALL METALLIC UNION NUTS & ADAPTORS OF ALL FLEXIBLES WITH SPECIAL GREASE TAPE AND WRAP IN PLASTIC (TO MAKE WEATHER PROOF AS FAR AS POSSIBLE). ALL FLEXIBLE HOSES (VENDOR – SUPPLY). | 1 | Set | 48,000 ₹48,000 Lowest | 1,22,500 ₹1,22,500 | 3,60,000 ₹3,60,000 | 1,75,000 ₹1,75,000 | 3,88,000 ₹3,88,000 |
| 11.00 | TO CHECK SLEWING GEAR ASSEMBLY AND DAMAGED PARTS IF ANY TO REPAIR/RENEW. | 1 | Set | 61,000 ₹61,000 Lowest | 79,200 ₹79,200 | 9,06,142 ₹9,06,142 | 2,80,000 ₹2,80,000 | 2,26,000 ₹2,26,000 |
Tender Value
Refer Docs
Closing Date
5 Jul 2025, 12:00 pmClosed
DGM SRM
Ship Repair Materials Department Cochin Shipyard LTD Perumanoor PO
JOBS WORKS ON HOSE HANDLING CRANE FOR THE VESSEL RM0815
2025_CSL_239309_1
CSL/SR1/815/43882
Open Tender
Marine Services
Works
20 days
KOCHI
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
23 Aug 2025
24 Jun 2025
7 Jul 2025
24 Jun 2025
5 Jul 2025
24 Jun 2025
24 Jun 2025 - 5 Jul 2025
Amount
JOBS WORKS ON HOSE HANDLING CRANE (SERVICE COST)
RETURN FILTER CARTRIDGE FILTER DELIVERY STRAINER TO CLEAN.
MAIN HYDRAULIC P/P TO DISCONNECT TRANSPORT TO W/SHOP OVERHAUL AND TRANSPORTED BACK ON BOARD AND REINSTALL AS THE ORIGINAL.
SLEWING / HOISTING HYDRAULIC MOTOR TO DISCONNECT TRANSPORT TO W/SHOP OVERHAUL AND TRANSPORTED BACK ON BOARD AND REINSTALL AS THE ORIGINAL.
CONTROL VALVE ASSEMBLY TO DISCONNECT AND OVERHAUL.
SLEWING REDUCTION GEAR BEARING TEETH AND ROLLER CABLES JIB FOOT CYL. AXLES AND HOISTING WINCH BRG. LUBRICANTS TO RENEW.
JIB CYLINDER AND RAM ASSEMBLY TO REMOVE TRANSPORT TO SHOP & O’HAUL SEALS (VENDOR – SUPPLY) TO RENEW. JIB CYLINDER/RAM ASSEMBLY TO TRANSPORT BACK ON BOARD AND FITTED BACK IN PLACEAS THE ORIGINAL. CHECK JIB FOOT BEARING .
JIB FOOT BEARING IF DAMAGED TO BE RENEWED (VENDOR SUPPLY).
TO RENEW ALL FLEXIBLES & ADAPTORS WHICH ARE WEATHER EXPOSED/ CORRODED & RENEW ACCORDINGLY. TO COVER ALL METALLIC UNION NUTS & ADAPTORS OF ALL FLEXIBLES WITH SPECIAL GREASE TAPE AND WRAP IN PLASTIC (TO MAKE WEATHER PROOF AS FAR AS POSSIBLE). ALL FLEXIBLE HOSES (VENDOR – SUPPLY).
TO CHECK SLEWING GEAR ASSEMBLY AND DAMAGED PARTS IF ANY TO REPAIR/RENEW.
ALL COMPONENTS TO FIT BACK & LOAD TEST TO BE CARRIED OUT AT 15 TON TO THE SATISFACTION OF CEO/SUPDT. PRESSURE GAUGES 0 - 4 BAR 0 - 400 BAR AND 0 - 100 BAR TO BE FITTED ON PRESSURE TAKE OFF POINTS AND CHECKED. ALL LEAKAGES DURING LOAD TRIAL TO RECTIFY.
TO CHECK BRAKE EFFICIENCY HYDRAULICALLY. PILOT PRESS. 12 - 30 BAR. BRAKES LINER SIZE - 1800 X 160 X 10 MM - 2 NOS , MATERIAL - GLASS FIBER
WORN & WASTED LEVERS FOR LIMIT SWITCHES OPERATION TO BE RENEWED. ALL HYDRAULIC LIMIT SWITCHES / CUTOUTS TO OVERHAUL AND SHOW IN WORKING ORDER TO CEO/SUPDT.
MIDSHIP HOSE HANDLING CRANE (SERVICE COST)
EXISTING WIRE TO REMOVE AND NEW WIRE TO RIG IN HOSE HANDLING CRANE WIRE: SHIP SUPPLY
CRANE HEAD SHEAVE ASSEMBLY TO OVERHAUL.
JIB HEAD SHEAVE ASSEMBLY TO OVERHAUL.
FLOATING BLOCK/SHEAVE TO OVERHAUL.
CRANE OPERATION CONTROL LEVERS TO BE CHECKED/HYDRAULIC LEAKAGES TO BE ARRESTED.
CRANE HYDRAULIC OILS TO REMOVE SEPARATELY IN CLEAN DRUMS. STORAGE TANK TO CLEAN THROUGHLY AND CLEAN OIL TO FILL. (SHIP SUPPLY)
HOSE HANDLING /PROVISION CRANE HOOKSAFETY CLIP IS DAMAGED TO BE RENEWED
HOSE HANDLING CRANE JIB CUT OFF NOT WORKING TO RECTIFY
GREASING NIPPLES OF CRANE 15NOS TO BE RENEWED
CONTROL LEVER BOX COVER WITH LOCKING ARRANGEMENT TO BE FARICATED AND FITTED
ALL LUBRICATING POINTS TO MAKE FREE AND LUBRICATE USING VENDOR PUMP TO THE SATISFACTION OF SHIP'S STAFF/SUPERINTENDENT. GREASE OWNER'S SUPPLY.
HOSE HANDLING CRANE SWITCH BOX TO BE FABRICATED 250MM*30MM
HOSE HANDLING CRANE ACTUATOR CONTROL BLOCK TO REPLACE.
TO RECTIFY HOSE HANDLING CRANE HOISTING HYD. MOTOR LEAK
JOBS WORKS ON HOSE HANDLING CRANE (MATERIAL COST)
RETURN FILTER CARTRIDGE FILTER DELIVERY STRAINER TO CLEAN.
MAIN HYDRAULIC P/P TO DISCONNECT TRANSPORT TO W/SHOP OVERHAUL AND TRANSPORTED BACK ON BOARD AND REINSTALL AS THE ORIGINAL.
SLEWING / HOISTING HYDRAULIC MOTOR TO DISCONNECT TRANSPORT TO W/SHOP OVERHAUL AND TRANSPORTED BACK ON BOARD AND REINSTALL AS THE ORIGINAL.
CONTROL VALVE ASSEMBLY TO DISCONNECT AND OVERHAUL.
SLEWING REDUCTION GEAR BEARING TEETH AND ROLLER CABLES JIB FOOT CYL. AXLES AND HOISTING WINCH BRG. LUBRICANTS TO RENEW.
JIB CYLINDER AND RAM ASSEMBLY TO REMOVE TRANSPORT TO SHOP & O’HAUL SEALS (VENDOR – SUPPLY) TO RENEW. JIB CYLINDER/RAM ASSEMBLY TO TRANSPORT BACK ON BOARD AND FITTED BACK IN PLACEAS THE ORIGINAL. CHECK JIB FOOT BEARING .
JIB FOOT BEARING IF DAMAGED TO BE RENEWED (VENDOR SUPPLY).
TO RENEW ALL FLEXIBLES & ADAPTORS WHICH ARE WEATHER EXPOSED/ CORRODED & RENEW ACCORDINGLY. TO COVER ALL METALLIC UNION NUTS & ADAPTORS OF ALL FLEXIBLES WITH SPECIAL GREASE TAPE AND WRAP IN PLASTIC (TO MAKE WEATHER PROOF AS FAR AS POSSIBLE). ALL FLEXIBLE HOSES (VENDOR – SUPPLY).
TO CHECK SLEWING GEAR ASSEMBLY AND DAMAGED PARTS IF ANY TO REPAIR/RENEW.
ALL COMPONENTS TO FIT BACK & LOAD TEST TO BE CARRIED OUT AT 15 TON TO THE SATISFACTION OF CEO/SUPDT. PRESSURE GAUGES 0 - 4 BAR 0 - 400 BAR AND 0 - 100 BAR TO BE FITTED ON PRESSURE TAKE OFF POINTS AND CHECKED. ALL LEAKAGES DURING LOAD TRIAL TO RECTIFY.
TO CHECK BRAKE EFFICIENCY HYDRAULICALLY. PILOT PRESS. 12 - 30 BAR. BRAKES LINER SIZE - 1800 X 160 X 10 MM - 2 NOS , MATERIAL - GLASS FIBER
WORN & WASTED LEVERS FOR LIMIT SWITCHES OPERATION TO BE RENEWED. ALL HYDRAULIC LIMIT SWITCHES / CUTOUTS TO OVERHAUL AND SHOW IN WORKING ORDER TO CEO/SUPDT.
MIDSHIP HOSE HANDLING CRANE (MATERIAL COST)
CRANE HEAD SHEAVE ASSEMBLY TO OVERHAUL.
JIB HEAD SHEAVE ASSEMBLY TO OVERHAUL.
FLOATING BLOCK/SHEAVE TO OVERHAUL.
CRANE OPERATION CONTROL LEVERS TO BE CHECKED/HYDRAULIC LEAKAGES TO BE ARRESTED.
HOSE HANDLING /PROVISION CRANE HOOKSAFETY CLIP IS DAMAGED TO BE RENEWED
HOSE HANDLING CRANE JIB CUT OFF NOT WORKING TO RECTIFY
GREASING NIPPLES OF CRANE 15NOS TO BE RENEWED
CONTROL LEVER BOX COVER WITH LOCKING ARRANGEMENT TO BE FARICATED AND FITTED
HOSE HANDLING CRANE SWITCH BOX TO BE FABRICATED 250MM*30MM
HOSE HANDLING CRANE ACTUATOR CONTROL BLOCK TO REPLACE.
TO RECTIFY HOSE HANDLING CRANE HOISTING HYD. MOTOR LEAK
JASH MARINE SALES & SERVICES (BID ID -867712)
ALL TECH MARINE HYDRAULICS (BID ID -869125)
GEARS & WHEELS (BID ID -867707)
AFFORD MARINE CONTROLS PVT.LTD (BID ID -867866)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .