Loading…
Loading…
Tender ID
Tender Value
₹22.3 Cr
EMD Value
₹22.3 L
Closing Date
27 Mar 2026, 6:00 pmClosed
Executive Engineer, R&B Division, Bhuj
ANJAR PACKAGE-1) Strengthening to Luni Gundala Tappar Babiya Road Ch. 5/600 to 27/350 km, Ta:-Mundra, Dist:-Kachchh 2) Strengthening to Mokha Kundrodi Road Ch. 0/00 to 3/200 km, Ta:Mundra, Dist:-Kachchh.
286048
99 For 2025-26
Open
Civil Works - Roads
Works
Kutch
15 documents required · 15 mandatory
₹18,000
Executive Engineer, R&B Division, Bhuj
₹22.3 L
13 Mar 2026
13 Mar 2026
13 Mar 2026
27 Mar 2026
13 Mar 2026
Name of work :-
ANJAR PACKAGE-1) Strengthening to Luni Gundala Tappar Babiya
Road Ch. 5/600 to 27/350 km, Ta:-Mundra, Dist:-Kachchh 2)
Strengthening to Mokha Kundrodi Road Ch. 0/00 to 3/200 km,
Ta:Mundra, Dist:-Kachchh.
Bill of Quantity
Memorandum showing items of works to be carried out.
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
No. Estimated In Figures In Words
but may be estimated Quantities
1 14.67 Clearing and grubbing road land 28455.09 Rupees Twenty HCT
including uprooting rank vegetation Eight
grass bushes,shrubs,sapling and Thousand Four
trees girth up to 300 mm removal Hundred Fifty
of stumps of trees cut earlier and Five And Paise
disposal of unserviceable materials Nine Only
(C) By mechanical means in area of
light jungle ( SOR I No :26117C, Pg
2 28745.58 Box cutting the road surface to 109.24 Rupees One cmt
proper slope and camber for Hundred Nine
making a base for road work And Paise
including removing the excavated Twenty Four
stuff and depositing on the road Only
side slope as directed upto
50Mt.lead. . item no26008
3 11116.63 Construction of Grannular sub 1170.92 Rupees One CMT
base of 200mm thick in by Thousand One
providing GSB Gr - I coarse graded Hundred
material using B.T Metal 26.5mm Seventy And
to 53 mm @ 35 % ,26.5mm to Paise Ninety
4.75mm 45% & Below 2.36mm 20 Two Only
% in uniform layer with motor
grader on prepared surface mxing
by mix in place method with
vibratory roller to achive the
desired density complete as per
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
4 11310.99 Providing and laying spreading and 1121.49 Rupees One CMT
compacting graded stone aggregate Thousand One
to wet mix macadam 250 mm thick Hundred
in two layers as per MORT&H Twenty One
specification including pre mixing And Paise
the material with water at OMC in Forty Nine Only
mechanical mix plant, carriage of
mixed material by tippers to site,
laying in uniform layers with paver
in sub base/ base course on well
prepared surface and compacting
with vibratory roller to achieve the
desire density. RA-2
5 4680.00 Providing 100mm thick compacted 520.89 Rupees Five CMT
side shoulder of quarry spall on Hundred
road site including collection of Twenty And
material spreading, rolling of Paise Eighty
watering etc. complete as Nine Only
6 44517.25 Providing & applying evenly 64.21 Rupees Sixty SMT
priming coat with bitumen Four And Paise
Emulsion (SS1) on prepared Twenty One
surface of granular base including Only
cleaning of road surface and
sparying primer at the rate of
7.50 Kg. / 10 Smt using using
mechanical means. RA4
7 31349.00 Providing and laying 75.00 mm 2857.82 Rupees Two MT
thick compacted bitumenous Thousand
macadam (BM) using crushed Eight Hundred
stone aggregate as per MORT & H Fifty Seven
gradation and Emulsion (RS-1) for And Paise
tack coat @ 2.5 kg/10smt. & VG-40 Eighty Two Only
grade bitumen at the rate of 3.40%
by weight of total mix (i.e. 34kg/mt
by wt. of total mix) for binding
including heating and mixing the
asphalt and aggregates in Batch
mix plant and transporting the mix
and spreading the same by Sensor
paver finisher and consolidation
with vibratory road roller including
using all necessary equipments,
tools, plants, including cost of all
materials, firewood, oil, lubricants,
labour charges etc. complete. RA-5
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
8 14198.88 Providing & laying 40 mm. thick 3861.51 Rupees Three MT
Compacted Bitumine Thousand
Concrete(BC)with BT aggregate as Eight Hundred
per M.O.R.T.&H.gradation & Sixty One And
asphalt grade VG-40 for mixing at Paise Fifty One
the rate of 55 Kg./M.T. i.e. 5.50% Only
of total weight of total mix
including heating the aggregate &
asphalt in Drum mix plant &
spreading the same by sensor
paver finisher & consolidation with
vibratory roller & flushing sand @
0.30 Cum/ 100 Smt. including
providing all materials equipments,
tools & plants, fire wood, oil,
kerosene, labour charges etc
complete using constractors own
machinery drum mix plant & paver
finisher etc complete RA-6
9 12477.15 Earthwork for embankment 177.91 Rupees One CMT
including breaking clods, dressing Hundred
with all lead and lift and including Seventy Seven
watering rolling and consolidation And Paise
of subgrade in layers at O.M.C. to Ninety One
required dry density including Only
filling the depression which occur
during the process using power
roller 8T to 10T.(E) From Borrow
area within 3.0KM. lead 26004EA p
10 1248.00 Providing and fixing indicator stone 343.27 Rupees Three No.
of approved stone as per I.R.C. type Hundred Forty
design in C. C. 1:4:8 including Three And
white washing etc. complete.(ii) Paise Twenty
Fixing in C.C. 1:5:10 As Per S.O.R Seven Only
11 44.00 Providing and fixing ordinary 1293.39 Rupees One No.
Kilometer stone of precast C.C. Thousand Two
1:2:4 including necessary Hundred
reinforcement as per I.R.C. type Ninety Three
design in C.C. 1:4:8 including letter And Paise
and paints etc. complete (For N.H., Thirty Nine
S.H. and M.D.R.) As Per S.O.R Only
I.Code : 26048, Sr No. : 89 Pg no.
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
12 10.00 Providing and fixing 5th Kilometer 1935.15 Rupees One No.
stone of precast C.C. 1:2:4 Thousand Nine
including necessary reinforcement Hundred Thirty
as per I.R.C. type design in C.C. Five And Paise
1:4:8 including painting,lettering Fifteen Only
etc. complete (For N.H., S.H. and
M.D.R.) As per S.O.R. I.Code :
13 250.00 Providing and fixing Hectometer as 356.50 Rupees Three No.
per I.R.C. type design including Hundred Fifty
painting, lettering etc. complete.(ii) Six And Paise
Fixing in C.C. 1:5:10 As Per S.O.R. Fifty Only
I.Code. 26044 B Sr No. : 83 Pg no.
14 1252.00 Providing and fixing guard stone as 350.80 Rupees Three No.
per I.R.C. type design including Hundred Fifty
white washing etc. complete.(ii) And Paise
Fixing in C.C. 1:5:10 ( SOR I .C. Eighty Only
15 8960.20 Road marking with hot applied 367.72 Rupees Three Sqm
thermoplastic paints with Hundred Sixty
reflectorising glass beads on Seven And
bitumin surface providing and Paise Seventy
laying a hot applied thermoplastic Two Only
compound 2.5 mm thick including
reflectorising glass beads @
250gms per sqm area, thickness of
2.5mm is excluding of surface
applied glass beds as per IRC:35-
2015. The finished surface to be
level, uniform and free from streaks
and holes. zebra patta /bump patta
lane /center line/ edge line/cut
patta. The white color marking
should provide ,liminance
coefficinet on cemend road shalll
be min 130 mcd/m2/lux and
Asphalt road shall be min 100 mcd
/m2/lux during the service life
during the day time. The marking
should meet the performance
criteria for night time reflectivity,
wet reflectivity and skid resistance
as mentioned in the section-15 of
IRC 35-2015. Warranty for the
Retro reflectivity should be two
years. 26161 Page
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
16 5064.00 Cat Eye / Road Stud / RPM: 326.23 Rupees Three No.
Supplying of Molded Twin Shanks Hundred
Raised Pavement Markers made of Twenty Six And
polycarbonate and ABS moulded Paise Twenty
body and reflective panels with Three Only
micro prismatic lens capable of
providing total internal reflection of
the light entering the lens face and
shall support a load of 13635 kgs.
tested in accordance to ASTM D
4280 Type H and complying to
Specifications of Category A of
MORTH Circular No
RW/NH/33023/10-97 DO III Dt
11.06. 1997. The height, width and
length shall not exceed 20 mm,
mm and 130 mm and with
minimum reflective area of
Sqcm on each side and the slope to
the base shall be 35 +/- 5 degree.
The strength of detachment of the
integrated cylindrical shanks, (of
diameter not less than 19 +/-
mm and height not less than 30+/-
2 mm) from the body, is to be a
minimum value of 500 Kgf. Fixing
will be by drilling holes on the road
for the shanks to go inside, without
nails and using epoxy resin based
17 40.00 Tree Guard sign :-Providing & fixing 531.26 Rupees Five No.
sign board made out of 2mm Hundred Thirty
aluminium sheet / 3mm ACP One And Paise
(Aluminum composite Panel) , size Twenty Six Only
30cms diameter circle, pretreated
with phospheting process and acid
etching, painted with one coat of
epoxy primer and two coats of best
quality epoxy paint reflectorised
with retro reflective sheeting as per
latest M.O.S.T. specifications. A
warranty for 10 years for the Retro
reflective sheeting from original
manufacturer & a certified copy of
3 year outdoor exposure test report
from third party test lab for the
product offered shall be submitted
by contractor. (A) Class-C Type-11
Retro Reflective sheeting. I Code :
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
18 12.00 Village Name Sign :-Providing and 6313.51 Rupees Six No.
fixing sign boards made out of Thousand
2mm aluminium sheet / 4mm ACP Three Hundred
(Aluminum composite Panel); size Thirteen And
90x60 cms. rectangular as per Paise Fifty One
design of IRC-67-2012. Pre treated Only
with phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3mtr long
stand post of 75 x 75 x 6mm /
65NB Circular MS Pipe as required
and frame fabricated from suitable
size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy
coatings in black and white bends.
The details of symbol or
inscription/letters / numerals for
each board shall be as per the
instruction of engineer in charge.
The fixing at site shall be in 1:2:4
CC blockof size 45 x 45 x 60 Cms.
for each leg.including excavation,
curing etc.complete under the
supervision of engineer in charge. A
19 28.00 Supplying and fixing road sign 3072.99 Rupees Three No.
board of M.S. plates and angle iron Thousand
including painting, lettering etc. Seventy Two
complete including fixing in C.C. And Paise
1:4:8 with necessary excavation Ninety Nine
etc. complete as per I.R.C. type Only
design.(ii) Reflective type S.O.R I
Code : 26054 B, Sr No. 99 Pg no.
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
20 140.00 Chevron sign :-Providing and fixing 4681.35 Rupees Four NOS
sign boards made out of 1.5mm Thousand Six
aluminium sheet / 3mm ACP Hundred
(Aluminum composite Panel); size Eighty One
60x50 cm as per design of IRC-67- And Paise
2012. Pre treated with phospheting Thirty Five Only
process & acid etching; coated with
one coat of epoxy primer and two
coats of best quality epoxy paint
;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of
Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 50 x 50 x
5mm; painted with bestquality
epoxy coatings in black and white
bends. the details of symbol or
inscription / numerals for each
board shall be as per the
instruction of engineer in
charge.The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty for 10 years
21 8.00 Direction (Junction) Sign :- 26572.09 Rupees Twenty No.
Providing and fixing sign boards Six Thousand
made out of 2mm aluminium sheet Five Hundred
/ 4mm ACP(Aluminum composite Seventy Two
Panel); size 244x122 cms. And Paise Nine
rectangular as per design of IRC-67- Only
2012. Pre treated with phospheting
process & acid etching; coated with
one coat of epoxy primer and two
coats of best quality epoxy paint
;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of
Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
4.0mtr long (2 Nos.) stand post of
75 x 75 x 6mm / 65NB Circular MS
Pipe as required and frame
fabricated from suitable size iron
angle of 50 x 50 x 5mm; painted
with bestquality epoxy coatings in
black and white bends. The details
of symbol foreach board shall be as
per theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty for 10 years
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
22 18.00 Cautionary Warning Sign :- 5077.27 Rupees Five No.
Providing and fixing sign boards Thousand
made out of 2mm aluminium sheet Seventy Seven
/ 4mm ACP (Aluminum composite And Paise
Panel); size 90 x 90 x 90 cms. Twenty Seven
equilateral triangle as per design of Only
IRC-67-2012. Pre treated with
phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm /
65NB Circular MS Pipe as required
and frame fabricated from suitable
size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy
coatings in black and white bends.
The details of symbol foreach board
shall be as per theinstruction of
engineer in charge. The fixing at
site shall be in 1:2:4 CC blockof
size 45 x 45 x 60 Cms. for each
leg.including excavation, curing
etc.complete under the supervision
of engineer in charge. A warranty
23 10.00 Facility Informatory Sign :- 5906.48 Rupees Five No.
Providing and fixing sign boards Thousand Nine
made out of 2mm aluminium sheet Hundred Six
/ 4mm ACP(Aluminum composite And Paise
Panel); size 80 x 60 cmsrectangular Forty Eight
as per design of IRC-67-2012. Pre Only
treated with phospheting process &
acid etching; coated with one coat
of epoxy primer and two coats of
best quality epoxy paint
;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of
Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
3.6mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 35 x 35 x
3mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol
foreach board shall be as per
theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty for 10 years
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
24 12.00 Regulatory / Mandatory Sign :- 4618.73 Rupees Four No.
Providing and fixing sign boards Thousand Six
made out of 2mm aluminium sheet Hundred
/ 4mm ACP (Aluminum composite Eighteen And
Panel); size 60 cms Dia Circle as Paise Seventy
per design of IRC-67-2012. Pre Three Only
treated with phospheting process &
acid etching; coated with one coat
of epoxy primer and two coats of
best quality epoxy paint
;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of
Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
3.6mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 35 x 35 x
3mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol
foreach board shall be as per
theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty for 10 years
25 8.00 STOP Sign :-Providing and fixing 7213.42 Rupees Seven No.
sign boards made out of 2mm Thousand Two
aluminium sheet / 4mm ACP Hundred
(Aluminum composite Panel); size Thirteen And
90 cms Octagone as per design of, Paise Forty
IRC-67-2012. Pre treated with Two Only
phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm /
65NB Circular MS Pipe as required
and framem fabricated from
suitable size iron angle of 35 x 35 x
3mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol
foreach board shall be as per
theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty or 10 years
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
26 6.00 Distance Informatory / Destination 20918.11 Rupees Twenty No.
Sign :-Providing and fixing sign Thousand Nine
boards made out of 2mm Hundred
aluminium sheet / 4mm ACP Eighteen And
(Aluminum composite Panel); size Paise Eleven
180x120 cms. rectangular as per Only
design of IRC-67-2012. Pre treated
with phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 4.0mtr long
(Nos.) stand post of 75 x 75 x 6mm
/ 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 50 x 50 x
5mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol
foreach board shall be as per
theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
27 6.00 Place Identification Sign :-Providing 14085.46 Rupees No.
and fixing sign boards made out of Fourteen
2mm aluminium sheet / 4mm ACP Thousand
(Aluminum composite Panel); size Eighty Five
150x90 cms. rectangular as per And Paise
design of IRC-67-2012. Pre treated Forty Six Only
with phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 4.0mtr long
(2 Nos.) stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 35 x 35 x
3mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol
foreach board shall be as per
theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty for 10 years
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
28 40.00 Hazard Marker Sign :-Providing and 3666.30 Rupees Three No.
fixing sign boards made out of 2.0 Thousand Six
mm aluminium sheet / 4 mm ACP Hundred Sixty
(Aluminum composite Panel); size Six And Paise
90x30 cms. rectangular as per Thirty Only
design of IRC-67-2012. Pre treated
with phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 1.8mtr long
stand post of 75 x 75 x 6mm /
65NB Circular MS Pipe as required
and frame fabricated from suitable
size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy
coatings in black and white bends.
The details of symbol foreach board
shall be as per theinstruction of
engineer in charge. The fixing at
site shall be in 1:2:4 CC blockof
size 45 x 45 x 60 Cms. for each
leg.including excavation, curing
etc.complete under the supervision
of engineer in charge. A warranty
for 10 years for the Retro reflective
29 446.25 Demolition including stacking of 1082.35 Rupees One CMT
serviceable materilas and disposal Thousand
of unserviceable materials with all Eighty Two And
lead and lift. (i) R.C.C. work Paise Thirty
30 1411.13 Providing and laying cement 3740.22 Rupees Three CMT
concrete 1:2:4 (1cement : 2coarse Thousand
sand : 4 graded stone aggregate Seven Hundred
20 mm. Nominal size) and curing Forty And
complete excluding cost of form Paise Twenty
work in : Two Only
31 446.25 Providing and casting in situ 5497.75 Rupees Five CMT
controlled cement concrete M-300 Thousand Four
for average 150 mm thick Hundred
wearing coat laid as directed Ninety Seven
dincluding tamping, vibrating, And Paise
finishing, curing and fillingin Seventy Five
joints with bitumen complete Only
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
32 2318.75 Construction of un-reinforced, 5975.16 Rupees Five CMT
dowel jointed, plain cement Thousand Nine
concrete pavement over a prepared Hundred
sub base with concrete grade Seventy Five
M300, coarse and fine aggregate And Paise
conforming to IS 383, maximum Sixteen Only
size of coarse aggregate not
exceeding 25 mm, mixed in a
batching and mixing plant as per
approved mix design, transported
to site, laid with a fixed form or slip
form paver, spread, compacted and
finished in a continuous operation
including trimixing provision of
contraction, expansion,
construction and longitudinal
joints, joint filler, separation
membrane, sealant primer, joint
sealant, debonding strip, dowel bar,
tie rod, admixtures as approved,
curing compound, finishing to lines
and grades as per drawing RA -
33 16.36 Providing and fixing in position FE 73243.02 Rupees MT
500D TMT bar reinforement Seventy Three
including cutting, bending and Thousand Two
tying complete as per detailed Hundred Forty
drawings. (A) R.C.C. Kerb. (B) Three And
R.C.C. Footpath.(C) R.C.C. Approch Paise Two Only
slab.(D) Wearing Coat. (S.O.R. INO
34 1340.00 Finishing wall with weather proof 120.26 Rupees One Sqmt
exterior emulsion paint on wall Hundred
surface (two coats) to give an Twenty And
required shape even shade after Paise Twenty
thoroughly brushing the surface to Six Only
remove all dirt, and remains of
loose powdered materials.etc
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
35 2323.00 Providing and laying 50.00 mm 2939.60 Rupees Two MT
thick compacted bitumenous Thousand Nine
macadam (BM) using crushed Hundred Thirty
stone aggregate as per MORT & H Nine And Paise
gradation and Emulsion (RS-1) for Sixty Only
tack coat @ 2.5 kg/10smt. & VG-40
grade bitumen at the rate of 3.40%
by weight of total mix (i.e. 34kg/mt
by wt. of total mix) for binding
including heating and mixing the
asphalt and aggregates in Batch
mix plant and transporting the mix
and spreading the same by Sensor
paver finisher and consolidation
with vibratory road roller including
using all necessary equipments,
tools, plants, including cost of all
materials, firewood, oil, lubricants,
labour charges etc. complete. RA-5
36 952.59 Providing & laying 30 mm. thick 3907.32 Rupees Three MT
Compacted Bitumine Thousand Nine
Concrete(BC)with BT aggregate as Hundred Seven
per M.O.R.T.&H.gradation & And Paise
asphalt grade VG-40 for mixing at Thirty Two Only
the rate of 55 Kg./M.T. i.e. 5.50%
of total weight of total mix
including heating the aggregate &
asphalt in Drum mix plant &
spreading the same by sensor
paver finisher & consolidation with
vibratory roller & flushing sand @
0.30 Cum/ 100 Smt. including
providing all materials equipments,
tools & plants, fire wood, oil,
kerosene, labour charges etc
complete using constractors own
machinery drum mix plant & paver
finisher etc completeRA-6
37 8.00 Providing and fixing ordinary 704.33 Rupees Seven No.
Kilometer stone of precast C.C. Hundred Four
1:2:4 including necessary And Paise
reinforcement as per I.R.C. type Thirty Three
design in C.C. 1:4:8 including Only
painting,lettering etc. complete (For
O.D. road V.R.) I.Code :
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
38 2.00 Providing and fixing 5th Kilometer 1935.15 Rupees One No.
stone of precast C.C. 1:2:4 Thousand Nine
including necessary reinforcement Hundred Thirty
as per I.R.C. type design in C.C. Five And Paise
1:4:8 including painting,lettering Fourteen Only
etc. complete (For N.H., S.H. and
M.D.R.) As per S.O.R. I.Code :
39 4.00 Tree Guard sign :-Providing & fixing 590.98 Rupees Five No.
sign board made out of 2mm Hundred
aluminium sheet / 3mm ACP Ninety And
(Aluminum composite Panel) ,size Paise Ninety
30cms diameter circle, pretreated Eight Only
with phospheting
process and acid etching, painted
with one coat of epoxy primer and
two coats of best quality epoxy
paint reflectorised with retro
reflective sheeting as per latest
M.O.S.T. specifications. A warranty
for 7 years for the Retro reflective
sheeting from original
manufacturer & a certified copy of
3 year outdoor exposure test report
from third party test lab for the
product offered shall be submitted
by contractor. (B) Class- B Type-4
Retro Reflective sheeting. I Code :
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
40 2.00 Village name Sign :-Providing and 6397.43 Rupees Six No.
fixing sign boards made out of Thousand
2mm aluminium sheet / 4mm ACP Three Hundred
(Aluminum composite Panel); size Ninety Seven
90x60 cms. rectangular as per And Paise
design o IRC-67-2012. Pre treated Forty Three
with phospheting process & acid Only
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ; reflectorised
with High Intensity Prismatic
Grade retro refiectivesheeting of
Type-4 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
3.3mtr long stand post of Iron
Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and
frame fabricated from suitable size
iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy
coatings in black and white bends.
the details of symbol or inscription
/ numerals for each board shall be
as per the instruction of engineer
in charge. The fixing at site shall be
in 1:2:4 CC blockof size 45 x 45 x
60 Cms. for each leg including
excavation, curing etc.complete
under the supervision of engineer
41 26.00 Chevron sign (Double) :-Providing 6051.81 Rupees Six NOS
and fixing sign boards made out of Thousand Fifty
1.5mm aluminium sheet / 3mm One And Paise
ACP (Aluminum composite Panel); Eighty One
size 60x50 cm as per design of IRC- Only
67-2012. Pre treated with
phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr
long stand post of 75 x 75 x 6mm /
65NB Circular MS Pipe as required
and frame fabricated from suitable
size iron angle of 50 x 50 x 5mm;
painted with bestquality epoxy
coatings in black and white bends.
the details of symbol or inscription
/ numerals for each board shall be
as per the instruction of engineer
in charge.The fixing at site shall be
in 1:2:4 CC blockof size 45 x 45 x
60 Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty for 10 years
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
42 2.00 Direction (Junction) Sign :- 21287.51 Rupees Twenty No.
Providing and fixing sign boards One Thousand
made out of 2mm aluminium sheet Two Hundred
/ 4mm ACP (Aluminum composite Eighty Seven
Panel); size 244x122 cms. And Paise Fifty
rectangular as per design of IRC-67- Only
2012. Pre treated with phospheting
process & acid etching; coated with
one coat of epoxy primer and two
best quality epoxy paint ;
reflectorised with High Intensity
Prismatic Grade retro
refiectivesheeting of Type-4 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 4.0mtr
(2Nos.) long stand post of Iron
Angle 75 x 75 x 6mm /
65NBCircular MS Pipe as required
and frame fabricated from suitable
size iron angle of 50x50x5mm;
painted with bestquality epoxy
coatings in black and white bends.
The details of symbol for each
board shall be as per the
instruction of engineer in charge.
The fixing at site shall be in 1:2:4
CC blockof size 45 x 45 x 60 Cms.
for each leg including excavation,
43 8.00 Cautionary Warning Sign :- 3906.19 Rupees Three No.
Providing and fixing sign boards Thousand Nine
made out of 2mm aluminium sheet Hundred Six
/ 4mm ACP (Aluminum composite And Paise
Panel); size 90 x 90 x 90 cms. Eighteen Only
equilateral triangle as per design of
IRC-67-2012. Pre treated with
phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ; reflectorised
with High Intensity Prismatic
Grade retro refiectivesheeting of
Type-4 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
3.6mtr long stand post of Iron
Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and
frame fabricated from suitable size
iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy
coatings in black and white bends.
The details of symbol for each
board shall be as per the
instruction of engineer in charge.
The fixing at site shall be in 1:2:4
CC blockof size 45 x 45 x 60 Cms.
for each leg including excavation,
curing etc.complete under the
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
44 2.00 Facility Informatory Sign :- 3990.64 Rupees Three No.
Providing and fixing sign boards Thousand Nine
made out of 2mm aluminium sheet Hundred
/ 4mm ACP (Aluminum composite Ninety And
Panel); size 80 x 60 cms. Paise Sixty
rectangular as per design of IRC-67- Four Only
2012. Pre treated with phospheting
process & acid etching; coated with
one coat of epoxy primer and two
coats of best quality epoxy paint ;
reflectorised with High Intensity
Prismatic Grade retro
refiectivesheeting of Type-4 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6mtr long
stand post of Iron Angle 75 x 75 x
6mm / 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 35 x 35 x
3mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol for
each board shall be as per the
instruction of engineer in charge.
The fixing at site shall be in 1:2:4
CC blockof size 45 x 45 x 60 Cms.
for each leg including excavation,
curing etc.complete under the
supervision of engineer in charge. A
45 2.00 Regulatory / Mandatory Sign :- 3540.12 Rupees Three No.
Providing and fixing sign boards Thousand Five
made out of 2mm aluminium sheet Hundred Forty
/ 4mm ACP (Aluminum composite And Paise
Panel); size 60 cms. Dia Circle as Twelve Only
per design of IRC-67-2012. Pre
treated with phospheting process &
acid etching; coated with one coat
of epoxy primer and two coats of
best quality epoxy paint ;
reflectorised with High Intensity
Prismatic Grade retro
refiectivesheeting of Type-4 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6mtr long
stand post of Iron Angle 75 x 75 x
6mm / 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 35 x 35 x
3mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol for
each board shall be as per the
instruction of engineer in charge.
The fixing at site shall be in 1:2:4
CC blockof size 45 x 45 x 60 Cms.
for each leg including excavation,
curing etc.complete under the
supervision of engineer in charge. A
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
46 2.00 STOP Sign :-Providing and fixing 6704.36 Rupees Six No.
sign boards made out of 2mm Thousand
aluminium sheet / 4mm ACP Seven Hundred
(Aluminum composite Panel); size Four And Paise
90 cms. Octagonal as per design of Thirty Six Only
IRC-67-2012. Pre treated with
phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ; reflectorised
with High Intensity Prismatic
Grade retro refiectivesheeting of
Type-4 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
3.6mtr long stand post of Iron
Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and
frame fabricated from suitable size
iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy
coatings in black and white bends.
The details of symbol for each
board shall be as per the
instruction of engineer in charge.
The fixing at site shall be in 1:2:4
CC blockof size 45 x 45 x 60 Cms.
for each leg including excavation,
curing etc.complete under the
supervision of engineer in charge. A
47 2.00 Distance Informatory / Destination 20918.11 Rupees Twenty No.
Sign :-Providing and fixing sign Thousand Nine
boards made out of 2mm Hundred
aluminium sheet / 4mm ACP Eighteen And
(Aluminum composite Panel); size Paise Eleven
180x120 cms. rectangular as per Only
design of IRC-67-2012. Pre treated
with phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 4.0mtr long
(Nos.) stand post of 75 x 75 x 6mm
/ 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 50 x 50 x
5mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol
foreach board shall be as per
theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
48 2.00 Place Identification Sign :-Providing 14085.46 Rupees No.
and fixing sign boards made out of Fourteen
2mm aluminium sheet / 4mm ACP Thousand
(Aluminum composite Panel); size Eighty Five
150x90 cms. rectangular as per And Paise
design of IRC-67-2012. Pre treated Forty Six Only
with phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per
ASTM D-4956 and latest
M.O.S.T.Specifications; 4.0mtr long
(2 Nos.) stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as
required and frame fabricated from
suitable size iron angle of 35 x 35 x
3mm; painted with bestquality
epoxy coatings in black and white
bends. The details of symbol
foreach board shall be as per
theinstruction of engineer in
charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including
excavation, curing etc.complete
under the supervision of engineer
in charge. A warranty for 10 years
49 2.00 Hazard Marker Sign :-Providing and 3518.69 Rupees Three No.
fixing sign boards made out of 2.0 Thousand Five
mm aluminium sheet / 4 mm ACP Hundred
(Aluminum composite Panel); size Eighteen And
90x30 cms. rectangular as per Paise Sixty
design of IRC-67-2012. Pre treated Nine Only
with phospheting process & acid
etching; coated with one coat of
epoxy primer and two coats of best
quality epoxy paint ; reflectorised
with High Intensity Prismatic
Grade retro refiectivesheeting of
Type-4 as per ASTM D-4956 and
latest M.O.S.T.Specifications;
1.8mtr long stand post of Iron
Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and
frame fabricated from suitable size
iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy
coatings in black and white bends.
The details of symbol for each
board shall be as per the
instruction of engineer in charge.
The fixing at site shall be in 1:2:4
CC blockof size 45 x 45 x 60 Cms.
for each leg including excavation,
curing etc.complete under the
supervision of engineer in charge. A
Rupees Twenty Two Crore Thirty One Lakh(s) Eighty Six Thousand Four Hundred Twenty
Seven And Paise Eighteen Only
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
*Estimated amount *Estimated amount
Put to tender Rs……………………… Put to tender Rs………………………
Deduct : ………% below Add : ………% above
Net Rs……………………… Net Rs………………………
In words ……………………………… In words ………………………………
*(please strike out whichever is not applicable)
Note-1 All works shall be carried out as per Public Works Department Handbook and other specifications of
Division or as directed.
Note-3 Rates quoted include clearance of site (prior commencement of work and its close) in all respects and
hold good for work under all conditions, site, moisture, weather etc.
Note-5 Testing of material shall be statement attached with the GERI Vadodara. Bill for testing charges shall
be paid by the Executive Engineer and 1% (One Percent) of amount put to tender excluding cost of
materials to be issued as schedule A i.e. Rs. _________ shall be recovered from the Contractor's
running bills as per (R&B) Department No.TNC/1085/(4)/C dated 10-5-85 and 20-12-91.
Note-8 pnMU VG[ BF6 lJEFU4 ;lRJF,I4 UF\WLGUZGF 9ZFJ S|DF\So V[DPV[DPVFZPv !!Z___vZ_!#vK4 TFP!q)qZ__$
YL ZFHI ;ZSFZGF AF\WSFD DF8[ J5ZFTF UF{6vBlGHGL ZMI<8L ;FNL DF8L VG[ ;MO8 DMZD 5Z ZMI<8L ,FU] 50X[P
Note-9 Labour Cess 1% of estimated cost put to tender for this work shall be recovered from the contract
payment as "Labour Cess" in terms of the Gujarat Govt. Gazette - extra ordinary - dt.12.12.2004,
implementation of buildings and other construction work (resolution of employment and conditions of
services Act'1996)
Note-10 Quantity of items may reduce or increase as per work execution.
Note-11 p5ZMST SFD SM.56 SFZ6;Z D\H]Z q GFD\H]Z SZJFGL ;œF ;CL SZGFZ VlWSFZLGL VAFlWT ZC[X[P
Note-13 In RCC items where there is change of grade mix or change as per actual mix design the difference of
cement consumption shall be deducted from rate of original item at the rate of star rate mentioned in
tender. However for Increase in quantity of cement no additional payment shall be made.
Note-14 For earthquake resistance provision the work shall be carried out as per the instruction of Engineer in-
Note-16 CM8DL1F %,Fg8 VG[ 5[JZYL YTF 0FDZGF SFDM AFAT[ ;ZSFZzLGF DFP VG[ DP lJEFU4 UF\WLGUZGF 5lZ5+
G\PV[;V[RVFZq!5(&qVF.ALq!*)s&fv;4 TFPZ_q!q_* VG[ 5ZL5+ S|DF\SP5ZRq!_qZ_!5q55q;L4 TFP_$q!!q!5
D]HA VG];ZJFG]\ ZC[X[P
Note-17 U]HZFT ;ZSFZzLGF DFPDPlJEFUGF 5lZ5+ S|DF\So VFZHLV[Gq&_Z__&qs#5fv; YL NFB, YI[, XZTMP
1) 5_DLDLYL JW] 0FDZ SFDGL ;\I]ST HF0F. sALPV[;PHLP4 ALPALPV[DP l;JFIf CMI T[JF Z:TFGF SFDDF\ NZ Z5_DLP NL9
V[S S|M; ;[SXG 5Z 0FDZSFDGL 5CM/F. VG];FZ A[ YL RFZ SMZ ;[d5, .HFZNFZ[ 5MTFGF SMZ S8L\U DXLG J0[ ;\A\lWT
GFIA SFI"5F,S .HG[ZzLGL CFHZLDF\ D[/JL VF5JFGF ZC[X[ VG[ VF ;[d5, ;L, SZL DFgI ,[AMZ[8ZL DFZOT YLSG[;4
0[g;L8L TYF AL8]DLG; Sg8[\8GF 5lZ1F6 SZFJL 5lZ6FD[ D[/JJFGF ZC[X[P ;\TMQFSFZS 5lZ6FDM VFjIF ;]WL 0FDZ SFDGL
R]SJJF5F+ ZSDGF 5@ ZSD JLYC[<0 ZFBJFDF\ VFJX[4 H[ ZSD ;\TMQFSFZS 5lZ6FDM D?IF AFN H K]8L SZFX[P 5Z\T]
;\TMQFSFZS 5lZ6FDM GlC\ D[/JJFGF lS:;FVMDF\ SZFZGL VgI XZTM VG];FZ SFI"JFCL Y. XSX[P
It. Qty. Item of work Estimated Rates Unit Total amount
It. Qty. Item of work Estimated Rates Unit Total amount
Estimated according to
No. In Figures In Words
but may be estimated Quantities
2) ~FP!__ ,FB S[ T[YL JW] ZSDGF SZFZ C[9/GF SFD 5Z .HFZNFZ[ O],8F.D SJM,LOF.0 V[gHLGLIZ lGI]ST SZJFGM ZC[X[
H[ V\U[ SFDGF JS"VM0"Z D?I[ lNGv!5 DF\ SFI"5F,S .HG[ZzLGL HF6 C[9/4 GFIA SFI"5F,S .HG[ZzLG[ lGO]S .HG[ZGF
GFD4 SJM,LOLS[XG4 DFS"XL84 ;8L"OLS[84 S,Z OM8MU|FO4 lGI]lSTGF C]SD JU[Z[ lJUT ZH] SZJFGL ZC[X[ TYF SFD 5Z CFHZ
YIF V\U[GM ZL5M8" VF5JFGM ZC[X[4 H[ VG];FZ SZFZ C[9/GF SFD 5Z SJM,LOF.0 .HG[ZGL p5ZMST XZT D]HA lGI]lST
YFI TYF :Y/ 5Z BZ[BZ SFDULZL G ;\EF/[ tIF\ ;]WLGF ;DIUF/F T[DH SFD RF,] ZC[ T[ ;DI NZdIFG lGI]S SZ[, .HG[Z
SFDULZL ;\EF/X[ GlC\ T[ ;DIUF/F DF8[ ~FP!54___qv 5|lTDF; ,[B[ lA,DF\YL S5FT SZJFDF\ VFJX4 H[ GMG ZLO\0[A,
Signature of Contractor Executive Engineer
R&B Division, Bhuj
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Additional Instructions.pdf
Asphalt Booklet.pdf
BOQ.pdf
GR.pdf
PQ Similar work and Machinery.pdf
ROAD WORK Booklet - 1.pdf
ROAD WORK Booklet - 2.pdf
SBD Book.pdf
Spe. Index.pdf
Special Condition for RPM.pdf
Special Condition for signage.pdf
Special Condition for Thermoplast.pdf
Specifications Package.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .