Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹45.5 LAccepted-AOC | 1 | Accepted-AOC Lowest Accepted | |
| 2 | 2₹48.5 L+₹1.8 L (3.93%)Rejected-AOC | 2 | Rejected-AOC Rejected | |
| 3 | 3₹50.4 L+₹3.8 L (8.09%)Rejected-AOC WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | 3 | Rejected-AOC Rejected | |
| 4 | 4₹52.7 L+₹6.0 L (12.9%)Rejected-AOC | 4 | Rejected-AOC Rejected | |
| 5 | Rejected-Technical | - | Rejected-Technical UNENLISTED CONTARCTOR DOCUMENT NOT UPLAODED AS PER NIT |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
30 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(ARMY) BHUJ
GE(ARMY) BHUJ
SPL REPAIR TO CERTAIN BLDGS AT MIL STN BHUJ UNDER GE(A) BHUJ
2023_MES_615948_1
8149
Open Tender
Civil Works
Item Rate
180 days
ARMY AREA BHUJ
REFER TENDER
6 documents required · 6 mandatory
₹500
GE(ARMY) BHUJ
₹92,000
Yes
22 Oct 2023
26 Aug 2023
2 Oct 2023
26 Aug 2023
30 Sept 2023
11 Sept 2023
Amount
Demolition of Cement concrete (unreinforced)Concrete of any description and in any position not otherwise specifically provided for complete all as specified
M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) Finishing cement concrete surface even and smooth all as specified and directed..
M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) incl demolition of existing Brickwork complete all as specified and directed.
M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick/Stone work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement and applying three two coats of OBD over a coat of primer complete incl taking down the existing damaged plastering complete all as specified and directed.
M&L for machine cut Kota stone slab 20 mm to 25 mm thick, as in slab/plateform and thread for steps set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish incl dismantling existing slabs complete all as specified and directed.
S&F in repairs heavy duty Stainless steel (Grade 305) curtain rods 20 to 25mm dia.
S&F in repairs Stainless steel (Grade 305) brackets (Open ends)/Dead Ends suitable for curtain rods of 20 to 25mm dia
M& L for Precast Slabs supported on walls for cup board shelves and the similar works incl necessary Tmt bars all as specified and directed by Engr In charge Complete
S& F of 18mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to Iron Angle frame complete
S & F butt Hinges, medium weight, stainless steel,75 mm size complete all as specified.
S&F extruded aluminum alloy handles 100 mm size fabricated type anodized all as specified.
S & F 200 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections or cast aluminium alloy.
Demolition of Cement concrete (reinforced)Concrete (Damaged Chajjas and Roof Projections at First Floor level and Roof Slab Level ) of any description and in any position including cutting of embedded TMT bars complete all as specified
M&L for 15 mm thick rendering in cement mortar on fair faces of brick/Stone work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement incl taking down the existing damaged plastering and also preparation of newly plastered sufaces of walls & applying 2 coat of acrylic exterior anti fungal emulsion paint over a coat of primer complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")
Supply only water proofing compound (ISI Mark)
M& for RCC TypeB0 1:2:4 (12.5mm graded aggregate) nominal mix for the First Floor and Second Floor Chajjas , Front Projections incl necessary Formwork and drilling holes to Existing RCC roof beam for inserting TMT bars and Casting Complete
M& for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips ®Complete
M&L vitrified ,coloured and printed tiles of size 600 mmx600 mm x 9 to 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and pointed in white or coloured cement to match with the colour of tiles, with all possible design combination incl Dismantling the existing flooring complete all as specified by Engr-In-charge complete all as specified and directed.
M&L vitrified ,coloured and printed tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement backing coat in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles with all possible design combinationincl Dismantling the existing Skirting complete all as specified and directed.
M&L for complete removal of existing treatment on walls and applying three coat of white wash on walls , complete all as specified and directed. by Engr-in-Charge
M & L for complete removal of existing treatment on walls and applying two coat of distemper oil emulsion over a coat of 2mm thick Plaster of Paris Putty to to prepare the surface even and smooth complete all as specified and directed.by Engr-in-Charge
M& L for Complete removal of existing treatment and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer Complete as all specified and directed by Engineer-in-Charge
Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coat of synthetic enamel paint complete all as specified and directed. by Engr-in-Charge.
Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying two coat of synthetic enamel paint complete all as specified and directed. by Engr-in-Charge.
Taking down existing chowkats or frames of any description and in any position not exceeding 2.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.
M&L mild steel in framed work [Fe-410-W (grade 250) quality A] as in door frames of angle ,Pipes complete, drilled for fixing to Brick Work by holdfast etc., to be prepared for hanging or sliding with and including hinges or steel hanging door fittings including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed.
S & F of II Class Harwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board withcommercial faceveneers: suppliedand fitted to chowkats with hinges by welding to Iron door frame incl Preparation of Surface and apllying two coats of synthetic enamel paint over a coat of pink primer Complete
S & F of Glazed and skeleton shutters,divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, prepared to receive glass, gauze, etc edges of framing plain, chamfered or rounded. fitted withcut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats with hinges by welding to Iron door frame incl Preparation of Surface and apllying two coats of synthetic enamel paint over a coat of pink primer Complete
S&F 100mm long aluminum anodized barrel tower bolts of extruded section and fixed.
S & F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.
S&F extruded aluminum alloy handles 150 mm size fabricated type anodized all as specified.
S & F 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sjeet, cast or extruded sections or cast aluminium alloy.
M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified
S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.
M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement complete all as specified and directed.
S&F 4.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out the old broken glass complete
S&F of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples incl removal of damaged wiremesh complete
Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slpoe & gradient and n.exc 10sqm on plan and n 'exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed
Ditto but depth of excavation exceeding 1.5 mtr ditto
Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),150 mm dia pipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge
Ditto but 200mm dia of pipe ditto
Ditto but 300mm dia of pipe ditto
M&L for concrete bed to drain pipes in cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under, and hauching against the side of the pipes after they are laid tested for pipes of 150mm dia complete all as specified and directed
Ditto but for 200mm dia of pipe ditto
Ditto but for 300mm dia of pipe ditto
S&F jointing and testing for reinforced concrete drain pipes, 150mm bore, class NP-2, laid and jointed with collar in CM (1:1) complete all as directed by Engr-in-Charge
Ditto but 200mm dia of pipe ditto
Ditto but 300mm dia of pipe ditto
Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as directed by Engr-in-Charge.
M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:4) on concrete/ fair surfaces of block masonary, finished even and smooth without using extra cement with and including mixing water proofing compound as per manufactureres instructions complete all as specified and as directed by Engr-in-Charge. Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A' as supply only on requirement basis
M&L for PCC 1:3:6 type C1 (using 20mmgraded stone aggregate) as in coping exposed surfaces finished even and smooth using extra cement including necessary form work complete all as specified and directed by Engr-in-Charge.
Demolition of RCC manholes covers of any description and in any position complete all as directed by Engr-in-Charge
M&L pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) for manholes covers duly engraved "MES" marking including placing in position and set in cement mortar (1:4) complete all as specified and directed.
M&L for mild steel TMT 6 to 8mm dia as in reinforcement cut to length bent to shape required including cranking etc and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-Charge
Demolition of concrete (unreinforced) of any description and in any position not specifically provided for complete all as directed by Engr-in-Charge
M&L for PCC 1:2:4 type B2(using 40mm graded aggregate) as in benching surface channels including fair finishes of surfaces chamfering, throating and weathering and necessary form work complete as specified and directed by Engr-in-Charge
M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation of manholes, mass concrete etc. complete all as directed by Engr-in-Charge
M & L Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 40 mm graded stone aggregate ) smooth finished, and reforming benching as required for 150 mm to 300 mm dia of pipe
Supply only water proofing compound
Returning ,filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed by Engr-in-Charge
Removing excavated soil/ materials to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as directed by Engr-in-Charge
Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.
M&L vitrified ,coloured and printed tiles of size 600 mmx600 mm x 9 to 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and pointed in white or coloured cement to match with the colour of tiles, with all possible design combination as specified by Engr-In-charge complete all as specified and directed.
M&L vitrified ,coloured and printed tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement backing coat in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles with all possible design combination as specified by Engr-In-charge complete all as specified and directed.
Roughening surfaces of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc. Complete all as specified and directed
M&L Coloured Glazed Ceramic tiles (Digital Designer tiles) 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 with all possible design combination as specified by Engr-In-charge complete all as specified and directed by Engineer-in-Charge..
M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
Demolition of precast concrete block walling and similar items i.e.. ashlar facing dressed stone work, precast concrete articles etc., of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.
Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celling etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 )
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces/stone masonry and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly/old plastered surfaces of walls & applying 2 coat of cement base paint over a coat of alkali resistance primer complete all as specified and directed.
Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.
S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylindrical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures in repairs complete all as specified and directed.
S&F Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.
Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.
Demolition of cement concrete of any description and in any position (reinforced) in slab etc complete all as specified and directed.
M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.
Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store
Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store
M & L for powder coated ( minimum thickess of powder coating 50 micron) alumiium frame for widows with two or more channel icludig joiing cleat for fixing etc .complete all as specified and directed
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coated aluminium snap beading, screws etc. complete, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : (i) Making all edges i.e. cill and jamb good by cement mortar 1:3 (ii) Frame channel will be paid sepreatly.
M & L powder coated aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 9mmX9mmX1mm all as specified
S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.
S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam both side colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.
S&F solid PVC door frame of size 50mmX47mm made out of 5mm one side prelam colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884)
S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcial face on bath sides with lipping/frame to match complete all as specified and directed.
M & L for 30 mm thick glazed and skeleton shutters of 2nd class Hard Wood(Not less than Hollock wood) local made shutter, open rebated and prepare to revive glass, gauge etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) supplied and fitted to chowkat complete all as specified and directed.
M&L preparation of the new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 100 mm long butt hinges stainless steel medium weight and fixed to wooden or PVC frame fixed in repairs by stainless steel screw as directed by Engr-in-Charge.
S&F aluminium handles cast type, anodized of 150 mm size complete all as specified and directed.
S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.
S&F butt hinges 100mm long medium weight, cold rolled mild steel.
S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti siphonage pipe etc(including flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down existing unserviceable WC of any description and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.
S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified
S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed .
Dismantling of stone slabs and tiles (Kota stone etc.) of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.
M&L for machine cut kota stone slab 20-25 mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match with the shade including rubbing and polishing over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in cooking platform, Jambs cill and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed.
S&F in repair PVC (SWR) Nahni trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .
S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified
Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.
S&F 110 mm bore PVC (SWR) pipes ISI marked Type B single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed
S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.
S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.
S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110mm bore, complete all as specified and directed.
S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.
M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.
M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.
S&F (concealed / open) 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 15mm bore..
S&F (concealed / open) 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore.
S&F (concealed / open) 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 25mm bore.
S&F (concealed / open) 40mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 40mm bore..
Complete removal of exiting treatment from external wall preparation of old plastered surface and two coat of premium acrylic exterior anti algal fungal emulsion paint on wall all as directed by Engr-in-Charge.
S&F in repair stainless steel grating 150 x150mm size over floor trap anti cockroach all as approved sample all as specified and directed by Engineer-in-Charge
S&F pillar taps in repair of cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type
S & F Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work
S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydraulic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminated particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.
Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.
Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in ridge etc fixed with L or J hooks all as specified and directed.
Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.
S&F Roof trusses (framed) trusses purlins and fastening (etc., angle, channel, tubular section, round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.
M&L foe preparation of new steel surfaces exc 10 cm width or girth and applying two coat synthetic enamel paints on new steel surfaces over a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM 1:6 complete all as directed
M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as 75mm thick finished fair all as specified
Preparation of old/new decorated plastered or unplastered surfacesof wall including washing , rubbing down and stopping of distempered surface M&L for applying one coat of distemper oil emulsion paint white or tinted with 3 mm putty complete all as specified
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Health faucet fixing in pipe etc. complete
S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden /plastic cleats(Minimum weight 190gms)
S&F in repair Vitreous China, wash down water closet pan "Pedestal pattern" white including P TRAP OR S TRAP and connection to drain and to flush pipe(flushing cistern include) and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.
Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified.
M&L for false ceiling work of powder coated aluminium ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 4mmx24mmx0.40mm and GI suspenders 8mm dia fixed to ceiling with and including supply and fixing mineral fibres acoustic ceiling board of size 600x600x12mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any description and in any position and making good the disturb surfaces to match with the existing surfaces and finishes complete all as specified and directed.
Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fibber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.
S&F in repairs heavy duty Stainless steel (Grade 305) curtain rods 20 to 25mm dia.
S&F in repairs Stainless steel (Grade 305) brackets (Open ends) suitable for curtain rods of 20 to 25mm dia
S&F in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 20 to 25mm dia
S&F in repairs Stainless steel (Grade 305) supports suitable for curtain rods of 20 to 25mm dia
S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each panecomplete all as specified and directed.
Taking down existing wire mesh of any discription and in any position and supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed
S&F of wooden wall pannelling apply with finishing nails to the top of panel hold the bottom with a base board. Press the panels to avoid air bubbles while fixing.Use furring strips to level the wall to strengthen and levelling the wooden pannel. All as directed by Engineer In Charge
Demolition of Cement concrete (reinforced)Concrete of any description and in any position including cutting of embedded TMT bars complete all as specified
M& l for Nominal Mix TypeB0 1:2:4 (12.5mm graded (20 mm graded aggregate)Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including neessaty form work complete
M& for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips ®Complete
M & L powder coated aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified
S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified incl taking down the existing complete
M&L non skid ceramic Coloured tiles, 300mmx300mmx6mm to7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 incl dismantling existing tiles complete all as specified and directed.
M&L digital desiner glazed ceramic coloured tiles (300x450 mm) x6mm to 7mm thick on vertical surfaces such as skirting, dados, & riser to steps, set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour laid over and including 10 mm thick backing coat in cement mortar (1:4) incl dismantling existing tiles complete all as specified and directed.
S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with 20mm bore float valves and ball valveand including all fittings and fixtures in repairs incl dismantling of existing tanks complete all as specified and directed.
S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with 20mm bore float valves and ball valve and including all fittings and fixtures in repairs incl dismantling of existing tanks complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar on fair faces of brick/Stone work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement incl taking down the existing damaged plastering complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")
Supply only water proofing compound (ISI Mark)
M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick/Stone work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement incl taking down the existing damaged plastering complete all as specified and directed.
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement incl taking down the existing damaged plastering complete all as specified and directed.
M&L for preparation of newly plastered sufaces of walls & applying 2 coat of acrylic exterior anti fungal emulsion paint over a coat of primer complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for applying 0(Exterior grade) over a coat of primer Complete as all specified and directed by Engineer-in-Charge
Taking down existing chowkats or frames of any description and in any position not exceeding 2.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.
S&F 100mm long aluminum anodized barrel tower bolts of extruded section and fixed.
S & F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.
S&F extruded aluminum alloy handles 150 mm size fabricated type anodized all as specified.
S & F 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sjeet, cast or extruded sections or cast aluminium alloy.
S&F in repair brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union.
S&F Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain and to flush pipe and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.
S&F in Repairs PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle, flush pipe of polyethylene pvc 32mm dia high or low density including brackets complete all as specified and directed.
S&F (concealed / open) 16mm outer dia UPVC pipes & fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 15mm bore..
S&F (concealed / open) 20mm outer dia UPVC pipes & fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore.
S&F (concealed / open) 25mm outer dia UPVC pipes & fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 25mm bore.
M&L mild steel in framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing+B191and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed.
S & F in repair vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe incl Waste Pipe complete all as specified and directed .
S & F grating square 150mm size of PTMT (minimum weight 100) complete all as specified and directed.
S&F PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .
S&F Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type , chromium plated,with long shank and cup, screwed both ends for iron pipes or for union , for 15 mm bore , , fixed in repair , complete all as specified and directed.
S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified
S&F in repair for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs.
M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) incl demolition of existing Brickwork complete all as specified and directed.
S&F stainless steel health faucet witrh 1 Mtr tube and hook complete all as specified and directed ny Engr-in-charge. Confirming to Cat part No ALD573 of jaguar/PRAYAG or equvilent completed all as specified
M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying grit finish Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps etc over 10mm thick in CM 1:3 rendering and 40mm thick levelling course of PCC(1:2:4) also removing the existing roof treatment and hacking the smooth concrete surface incl discoonecting all sanitary fittings, tank connections and refiiting as it as after completion of roof treatment work complete all as specified.
Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.
M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM 1:6 over PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as directed
S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.
M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 38mmx24mmx0.25mm and GI suspenders 4mm dia fixed to ceiling with and including supply and fixing mineral fibres acoustic ceiling board of size 600x600x12mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any discription and in any position and making good the disturb surfaces to match with the existing surfaces and finishes
Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.
Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface.
Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface all as directed by Engr-in-charg.
M&L for Point wiring complete with FR PVC insulated unsheathed , 1100 V grade conforming to IS 694 , 1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conceled/surface conduit medium grade ,minimum 20 mm dia, ISI Marked, with sutaible size of 1 to 8 module metal flush boxes and back plate for mounting of modular switches/socket and regulators and including modular fornt plate with all acessories complete .
(a) One light point controlled by one way one switch SP 5 Amps ,240 V.
(b) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.
(c) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.
(d) One switch socket outlet 3 Pin, 5 Amps, SP on same board.
(e) One bell / buzer point controlled by one push button switches on independent board .
All as per the above item No 200 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet.
S&F modular switch one way 6 Amps , 1 module type complete .
S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete.
S& f modular switch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete.
S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete
S&F Bell push 6 Amps 1 module complete
S&F bell Multi music type , 240 Volt , Single Pole ISI marked complete.
Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as per directed by Engr-in-charge.
Supply and fixing of mirror light of capacity 1x10 Watt epoxy white powder coated CRCA sheet steel housing with acrylic diffuser gaskat with all fixing acessories complete all as specified and directed.
supply & fixing modular fan regulator step type , 2 module complete.
S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 12 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.
S&F MCB SPN, 63 Amps, 240 Volts, rupturing capacity 10 KA."C" Series complete.
S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete.
supply and fix AC surge protection device, one pole & neutral, Voltage 240V DIN rail mounted,electrical conncetion with suitable rating copper wire complete all as specified and directed by Engr-in-charge
supply and fixing under voltage & over voltage protection ,DIN rail mounted,single phase electrical conncetion with suitable rating copper wirecomplete all as specified and directed by Engr-in-charge.
Supply & fix RCBOs double pole 63A for earth leakage, overload & short- circuit protection 30 mA complete
M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.
Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.
(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.
Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.
S&f angle holder backlite with 1x11 Watt LED Bulb with fixed on hylum sheet including all fixing acessories and making of connection with twin core flexible copper conductor from ceiling rose to fitting complete all as specified and directed.
Taking down celing fan /exhaust fan for refixing after painting , overhauling including greasing oiling etc complete.
Hanging only repaired celing fan /exhaust fan after painting , overhauling , greasing and replacement of U/S componante to make functional including provision of 3 core flexible copper conductor from ceiling rose to fan complete all as specified and directed .
Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 sqmm 2 core complete all as specified and directed
Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete as sepecified.
Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm.
Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point.
M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation.
Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete.
Supply and laying GI tube light grade 40 mm bore complete.
Supply and lay pipe uPVC pipe including fittings of size 50 mm (2.0") dia complete all as specified and directed
Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed
M&L for cutting of existing DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory exvation and earthwork, dewatering etc,if any involed, complete all as specified and directed for 50 / 100 mm bore of pipes
supply and fix ball valve 25 mm dia including all fittings all as specfied and directed
Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface all as directed by Engr-in-charg.
S& F modular switch 16 Amps 1 module complete.
Supply and fixing LED ceiling lights fitting 600mmx600mm, 36 watt complete with driver box type with driver, complete all as per directed by Engr-in-charge.
M&L for sub main wiring with two runs of 6 Sqmm (2x6 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 4 Sqmm (1x4 sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 6 Sqmm ,one run of 4 Sqmm ( 2x6 sqmm + 1x4 sqmm ) cable and one meter of conduit will be measured as one unit again.
S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 12 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.
Supply & fix RCBOs double pole 32A for earth leakage, overload & short- circuit protection 30mA complete
S&F building security light of capacity 35 watt top openable , separate driver compartment , 10 KV surge protection external type , under voltage & high voltage protection , 100 lumen per watt or higher , 1 LED be 1 to 3 watt , pressure die cast aluminium body , moulded type driver , IP - 67 , including all fixing arregement complete.
Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 sqmm 2 core complete all as specified and directed
Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete as sepecified.
Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm.
Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point.
M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation.
Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete.
Supply and laying GI tube light grade 40 mm bore complete.
Supply and lay pipe uPVC pipe including fittings of size 50 mm (2.0") dia complete all as specified and directed
Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed
M&L for cutting of existing DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory exvation and earthwork, dewatering etc,if any involed, complete all as specified and directed for 50 / 100 mm bore of pipes
supply and fix ball valve 25 mm dia including all fittings all as specfied and directed
Excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr depth & n.exc 3 mtr for foundation and laying of cable and getting out in soft loose soil let complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge..
Removing excavated soil not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed by Engineer-in-Charge.
NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.
zotabrothers
M/s Bombay Novelty Stores
suvidhiconstruction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .