CONST. OF PLASTIC WASTE MANAGEMENT UNIT AT-VILLAGE-BHIMASAR OF TALUKA ANJAR (AYOJAN /2025-26)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead. (C) Hard

1 Murrum ( SOR 2023-24 Item 24.70 251.85 Cu.Mt.

Code- 04001C Pg. No.- 45)

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand

broken stone aggregates 40 mmnominal size) and curing complete excluding cost of

2 formwork in (A) Foundation and Plinth ( SOR 2023-24 Item Code- 05004A Pg.No.- 26.25 2653.67 Cu.Mt.

Providing and laying controlled cement concrete M.200 exposed work with

curingetc.complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS:(i) Having cross-sectional area

to 0.08 Sq.M ( SOR 2023-24 Item Code- 05033B1 Pg.No.- 63)

Providing and laying controlled cement concrete M.200 exposed work with curing

etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) BEAMS :(i) Having cross-sectional area 0.05 to

0.08Sq.M ( SOR 2023-24 Item Code- 05033A1 Pg.No.- 62)

Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5 (1- Cement :

5 5 -fine sand) (A) Modular ( SOR 2023-24 Item Code- 06001AA Pg. No.- 70) 37.74 4345.02 Cu.Mt.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

6 disposited layer by ramming and watering. (SOR 2023-24 Item Code- 04006 Pg. No.- 15.64 129.10 Cu.Mt.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level. ( SOR 2023-24 Item

Providing 15 mm thick cement plaster in single coat on single on Rough (Similar)

side of single or half brick walls for interior plastering upto floor two level and

8 finished even and smooth in (i) Cement mortar 1:3 (1- cement :3- sand) ( SOR 2023- 336.95 170.10 Sq.Mt.

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams and

joists, channels angles Tees, flats, with connecting plates or angle cleats as in main

9 and cross beams. Hip and jack rafters, purlins conneted to common rafters and the 26.28 8958.28 Quintal

like. ( SOR 2023-24 Item Code- 11002AA Pg.No.- 107)

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L

Hooks, Bolt sand nuts 8 mm diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding thecost of purlins, Rafters

10 and Trusses. (1) 0.80 mm thick sheet. ( SOR 2023-24 Item Code- 15001A 162.75 719.93 Sq.Mt.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement. ( SOR 2023-24 Item

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. (

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with

13 pigment to match the shade of slab including rubbing and polishing etc. complete. 6.59 956.03 Sq.Mt.

(A) 25mm thick. ( SOR 2023-24 Item Code- 14012AA Pg.No.- 125)

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.

laths inter- locked together through their entire length and jointed together at the

ends by end locks mounted on specially designed pipe shaft with bracket plates,

guide channels and arrangements for inside and outside locking with push- pull

14 operation complete but excluding the cost of hood cover and spring. (B) Shutters 14.27 3696.58 KG

having width above 3.5 M ( SOR 2023-24 Item Code- 11006B Pg.No.- 109)

Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal

Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm@ 0.456kg/mt

,vertical member of size 40mm x 18mm x 1.29mm @

15 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float glass with 1.11 2119.14 Sq.Mt.

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window ( SOR 2023-24 Item Code-

16 Marble Slab Polished granite stone 20 to 25mm thick black ( SOR 0.98 2542.37 Sq.Mt.

2023-24 Item Code- M394 Pg.No.- 26)

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced

with 1.6 mm dia. Mild steel wire including roughening, cleaning, fixing and finishing

17 in cement mortar 1:3 and curing complete. (D) 75mm thick (SOR 2023-2 Item Code- 0.36 770.55 Sq.Mt.

Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to

be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White

18 colour. (SOR 2023-24 Item Code- 23009 Pg.No.- 173) 2.00 930.83 Each

Providing and fixing 100mm size P or S trap for water closet squatting pan including

jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine

19 sand)(A) Vitreous China. (SOR 2023-24 Item Code- 23011 Pg.No.- 173) 2.00 313.43 Each

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v

20 400mm size. (i) In white colour. (SOR 2023-24 Item Code- 23018 Pg.No.- 174) 1.00 1491.53 Each

Providing erecting and fixing double coated ISI water tank of required capacity each

with all necessary fittings and connection etc. complete on terrace. (SOR 2023-24

Item Code- 22014 Pg.No.-

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(B) 25mm (SOR 2023-24 Item Code- 23004B Pg.No.- 172)

Providing and fixing screw down bib taps of following size.(B) Brass

23 chromium plated screws down Bib Tap. (ii) 20mm dia.(SOR 2023-24 Item Code- 2.00 212.68 Each

Providing and fixing Gun metal check or non- return fullway wheel valve.(C) 25mm

24 dia. (SOR 2023-24 Item Code- 23031C Pg.No.- 176) 1.00 416.47 Each

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter

of self cleaning design with C.I. screaed down or higned grating including cost of

cutting and making good the walls and floor 100mm inlet and 50 mm outlet. (C)

25 100mm dia. (SOR 2023- 24 Item Code- 23008 Pg.No.- 173) 2.00 600.08 Each

26 P.V.C. Pipes 6 kgf/ Sq.cm. 110 mm dia. - For W.C. Pan to Chamber- Pit (SOR 2023-24 10.00 207.63 Rmt

Item Code- M449 Pg.No.- 27)

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

27 aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with 2.00 2903.89 Each

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line. (SOR 2023-24 Item Code- 24016AA Pg.No.- 187)

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling

brickbats with dry masonry work at top for 45cm. height including covering the top

with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as directed. (SOR 2023- 24 Item Code-

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less

than 35Kg. (SOR 2023-24 Item Code- 23038 Pg.No.- 177)

White washing with lime on wall surface (two coats) to give an even shade including

thoroughly booming the surface to remove all dirt, dust; mortar drops and other

30 foreign matter. ( SOR 2023-24 Item Code- 18001 Pg.No.- 137) 186.51 11.97 Sq.Mt.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface

31 to remove all dirt, and remains of loose powdered materials.etc complete (SOR 141.66 113.40 Sq.Mt.

2023-24 Item Code-

Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the

32 surface an even shade including cleaning the surface of all dirt, dust and other 136.47 86.94 Sq.Mt.

foreign matter. ( SOR

2023-24 Item Code- 19002 Pg.No.- 141)

Add Providing and fixing

Add 18% For GST on Net Amount (9% SGST + 9%

Testing report - 0.3%

I/We am/are willing to carry out the work at .................................................................................% above/below

(percent should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender

works out as under.

Estimated amount Estimated amount

Put to tender Rs.1426339.00 Put to tender Rs.1426339.00

Deduct.......% below Rs................... Add………% Above Rs…………………

Net Rs…………………. Total Rs………………..

*(please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules ie. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills

Signature of Bidder Taluka Development Officer