Strengthening of Baluti (Baluti) Water Supply Scheme in Bhimtal, Nainital

Amount

Construction of R.C.C Intake Chamber Size 1x1x1.50m Supply of all material labour T&P etc, As per Design and Drawing.

Supply Carting and Laying into the trenches for rising main by welding joint required for proper complition of work MS ERW pipe 50 mm dia 4.8mm thick.

Painting of ERW pipe with 2 coats of approved quantity (Anti-corrosive paint over one coat of primer) 50mm dia pipe.

Supply of G.I. medium pipes & specials fittings Excluding Cartage) lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line including cutting and threading of pipe for making up lengths as required for proper completion of work of following sizes.

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

50mm Dia

Supply & Fixing of following fittings including cartage of materials labour, T&P etc. complete GM Gate Valves

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

65 mm Dia

50mm DiaCast steel Sluice Valve WP 30kg/cm2

50mm DiaCast steel Reflux/swing check Valve WP 30kg/cm2

Excavation of earth for pipe line in following strata lift upto 1.50 m. and lead upto 30.00 m. including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60.00 m. from trenches including supply of labour T&P etc. all complete. It is estimated that 75% excavation will be in soil mixed with shingle, bajari & boulders and rest 25% will be in medium rock. Soil mixed with Shingle, Boulders etc

Medium Rock

Supply of all material labour T&P etc and construction of Gate/Wheel valve Chamber as per type design 90x90x100 cm

Construction of masonry Chamber Size 60x45x50 cm brick work 1:4 with locking arrangment and 12 mm thick plaster finising Supply of all material labour T&P etc, As per Design and Drawing

Supply of all materials, labour, T & P etc. and Construction of Thrust Block as per type design complete (1 in 200 m length Pipeline)60x60x60 cm

Protection work

Excavation of foundation structure and wall

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Cement Concrete Flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, and nalla portion.

Random Rubble Masonry with Hard Stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.

Provision of Cartage of Pipe & Specials

Supply of all materials, labour, T&P etc and provide Functional House Tap Connection (FHTC) to every household with 15 mm dia 12 meter pipe

Provision of Iron Gate with Pillars of size as required complete 80 KG(02No)

Misleniues item Barbed wire fencing with Angel iron 50x50x6mm

Provision for 1.50mtr Height Boundry Wall in Brick masonry as per sheet

Provision for Pumping Plants as per Detail sheet------

Supply of Electrick Driven high head horizontal Multistage Centrifugal clear water Pump 100 lpm discharge and 350 mte head complete coupling and coupling Guards.

Supply of 15 H.P Crompton Electrick Motor 415+/-3 phase 50HZ

Supply of MS Fabrication heavy duty base Plate for Mounting above pump and Motor

Supply of Fully Automatic Auto Transformer starter 15 HP Suitable to control above motor with transformer oil

Supply of 100 AMPs Three Phase Main Swich with neutral link

Supply of dust and vermin proof cubical type floor mounting type control panel made out of 14 SWG sheet steel having bus bar chamber with copper bus bar comprising of following having one No.incoming &2 Nos Outgoing as per sheet

Power wiring and Earthing Materials all material Complete

Main Piping and Valve Sunction side delivery side and byepass Arrangment .

Provision for Gauges Pressure Gauges 100 mm and Compound Gauge 100 mm dial with fittings 2 nos.

Supply of tools reqiued for Maintienance of pomping plants

Supply of Rubber resistentance Sheet 1x2x.025m

50mm dia Bulk head water meter

Chain pully block having 2Ton with trolly

Supply of rubber resistentance Sheet 1x2x.025m

Supply of other material of pump house

Installation and Commissioning of Pumping Plants with all Acessories inside the Pump house and Testing inner and outer side and Painting of pump plants 2 coats Supper enamel paint

Painting of entire installation with 2 coats of super enamel paint as per direction of Engineer-Incharge of works

Cartage of Pumping plants and all acessories to side

Cost of supply and execution of 11 KVA H.T Transmission line from existing 11KV line to stage -I complete

Security charge for a total load 25.97 KVA

Mislellaneous charge &contigencies charge

Cost of 11/0.44 KV 3 Phase 50c/s Ac supply copper woundelectric Transformers for following sites with transformer oil 25 KVA

TPMO/Goswiches for consumer side transformers of 11/0.44 KV

Other item Measure Instrument (I)Megger 2500m

(ii)Tong tester

Rubber resistance sheet 2mx1mx.25m thick

Fire Extenguisher system

Internal electrification of Pump house

Construction of Pump House including supply of all material labour t&p as per type design. 4Mx3.50Mx4.50M as pe below (01Nos)

Excavation of earth in foundation in soil mixed Shingle, bajri etc. including lift upto 1.50 M. and lead upto 50 M. filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 M from the centre of the foundation treches, including labour, T&P etc. all complete.

soil mixed with boulders

Medium Rock

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

R.C.C 1:1.5:3 with cement, coarse sand and 20 mm gauge sotne ballast in lintatals sunshades doors and window sills excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.5 mm thick binding wire including sup

Mild steel or iron work in heavy sections & sizes as door frames window to required shape including supply of steel sections, hinges, nuts & their fixing required for proper completion of work.

Centering & Shuttering for slab, sill & sun shead Including Strtting propping etc and removal of form work

foundation

Sun shed and slab

Linter and Beam

First class brick work (one brick thick) in 1:6 cement and coarse sand including supply of all material, labour, T&P etc. complete in super structure including necessary cutting & moulding of bricks as required & also including honey comb brick work.

1st class brick 1:6 in super structure

S/F of MS Angel 40mmx40mmx5mm chaukhats for doors windows

Providing and fixing MS glased doors and windowshutter 1mm thick ms sheet with frame 40mmx40mmx6mm

12 mm thick cement Plaster 1:6

Cement Concrete Flooring 1:2:4 finished with a floating coat of neat cement, including cement slurry but excluding the cost of noising of steps etc..

Supply of fixing of glass of glass strips of 40mm x 4mm size in cement concreat flooring

White wash with lime three or more coat on new work

Dry distemper on internal wall over a coat of primer

Finishitsng wall with acrylin smooting exterior painting two more coats on new work and with cement primer one coat

Painting on steel surface with paint of approved quality including paimer one coat

Constrution 15cm dia semi circular drain

Supply and fixing of M.S I section for size 250mm x 125mm and length 3.5 m

Supply &fixing of 100 mm dia S.C.I down take pipe including in wall

JSB Enterprises