Annual Rate Contract (ARC) for repair and maintenance of electrical installations.

Replacing of inspection lamp bulb and holder. Details as per sl No 1.1 in BOQ

Replacement of tube light fittings.Details as per sl No 1.2 in BOQ

Replacement of switches/MCBs for light fittings. Details as per sl No 1.3 in BOQ

Installation and charging of new light points (include wiring (maximum of 10mtr.), providing switches, fixing light fittings supports and light fitting etc.). Details as per sl No 1.4 in BOQ

Replacement of Street light fittings.Details as per sl No 1.5 in BOQ

Installation and charging of new street light points (includes wiring (maximum of 10mtr.), providing switches, fixing light fittings supports and light fitting etc.).Details as per sl No 1.6 in BOQ

Repair of light fittings (Tube light, HPMV, HPSV, CFL, LED, MH etc.). Details as per sl No 1.7 in BOQ

Removal of Ceiling fan, wall mounting fans, pedestal fans etc. from its location, checking (replace if required) fan hooks, rubber bush, bolt& Nut etc. cleaning and refitting to its location.Details as per sl No 2.1 in BOQ

Repair of Ceiling fan, wall mounting fans, pedestal fans.Details as per sl No 2.2 in BOQ

Replacement of Ceiling fan, wall mounting fans, pedestal fans. Details as per sl No 2.3 in BOQ

Installation and charging of new Ceiling fan/wall mounting fans/ pedestal fans etc. (includes wiring (maximum of 10mtr.), providing switches etc. Details as per sl No 2.4 in BOQ

Repair of exhaust fans of different capacity. Details as per sl No 2.5 in BOQ

Replacement of exhaust fans of different capacity.Details as per sl No 2.6 in BOQ

Installation and charging of new exhaust fans of different capacity (includes wiring (maximum of 10mtr.), providing switches etc. Details as per sl No 2.7 in BOQ

Repair of Tube axial fans/Air circulator/ Man cooler etc. Details as per sl No 2.8 in BOQ

Replacement of Air circulator Man cooler etc. Details as per sl No 2.9 in BOQ

Installation and charging of new Air circulator Man cooler (includes wiring (maximum of 10mtr.), providing switches etc. Details as per sl No 2.10 in BOQ

Air Blowing, cleaning and servicing of PCC/MCC panels. While cleaning any of the damaged component noticed, shall be replaced by contractor (All required spares shall be issued by IREL). The work includes cleaning of the panels, checking the healthiness of panel feeders, Switch gears, Terminals, repair/replacement of the same in case damaged condition. Details as per sl No 3 in BOQ

Air Blowing, cleaning and servicing of Main Switches, Starters, DBs’ While cleaning any of the damaged component noticed, shall be replaced by contractor (All required spares shall be issued by IREL). The work includes cleaning, checking the healthiness of feeders, Switch gears, Terminals, repair/replacement of the same in case damaged condition.Details as per sl No 4 in BOQ

Replacement of contactors.Details as per sl No 5.1 in BOQ

Replacement of over load relay. Details as per sl No 5.2 in BOQ

Replacement of DOL starter. Details as per sl No 5.3 in BOQ

Repair of DOL starter. Details as per sl No 5.4 in BOQ

Installation and charging of DOL starter.Details as per sl No 5.5 in BOQ

Replacement of contactors. Details as per sl No 6.1 in BOQ

Replacement of over load relay. Details as per sl No 6.2 in BOQ

Replacement of star delta timer. Details as per sl No 6.3 in BOQ

Replacement of Star Delta Starter. Details as per sl No 6.4 in BOQ

Repair of Star Delta starter. Details as per sl No 6.5 in BOQ

Installation and charging of Star Delta starter. Details as per sl No 6.6 in BOQ

Repair/replacement of remote switch station. Details as per sl No 7 in BOQ

Installation and charging of remote switch station.Details as per sl No 8 in BOQ

Repair/replacement of float switch control station. Details as per sl No 9 in BOQ

Replacement of float switch. Details as per sl No 10 in BOQ

Installation and charging of float switch control station & float switch (including its cabling). Details as per sl No 11 in BOQ

Repair/replacement of Drives and its programming. Details as per sl No 12 in BOQ

Repair/replacement of Lighting DBs. Details as per sl No 13 in BOQ

Installation and charging of New Lighting DB (Includes cabling, termination, earthing etc. Details as per sl No 14 in BOQ

Repair/replacement of Power DBs’. Details as per sl No 15 in BOQ

Installation and charging of New Power DB (Includes cabling, termination, earthing etc. Details as per sl No 16 in BOQ

32A to 160A. Details as per sl No 17.1 in BOQ

200A to 400A. Details as per sl No 17.2 in BOQ

Replacement of HRC Fuses. Details as per sl No 18 in BOQ

Removal fuse/ isolation of power from electro-mechanical machinery for maintenance work. Details as per sl No 19 in BOQ

Re-positioning fuse to circuit / charging the isolated power from the electro-mechanical machinery after maintenance work. Details as per sl No 20 in BOQ

Installation/Replacement/Repair of MCB/MPCB. Details as per sl No 21 in BOQ

32A to 160A. Details as per sl No 22.1 in BOQ

200A to 400A.Details as per sl No 22.2 in BOQ

630A and above. Details as per sl No 22.3 in BOQ

0.5 HP to 7.5HP.Details as per sl No 23.1 in BOQ

10HP to 30HP. Details as per sl No 23.2 in BOQ

40Hp to 50HP. Details as per sl No 23.3 in BOQ

0.5 HP to 7.5HP. Details as per sl No 24.1 in BOQ

10HP to 30HP. Details as per sl No 24.2 in BOQ

40Hp to 50HP. Details as per sl No 24.3 in BOQ

0.5 HP to 7.5HP. Details as per sl No 25.1 in BOQ

10HP to 30HP. Details as per sl No 25.2 in BOQ

40Hp to 50HP.Details as per sl No 25.3 in BOQ

0.5 HP to 7.5HP. Details as per Sl No 26.1 in BOQ

10HP to 30HP.Details as per Sl No 26.2 in BOQ

40Hp to 50HP.Details as per Sl No 26.3 in BOQ

0.5 HP to 7.5HP. Details as per Sl No 27.1 in BOQ

10HP to 30HP.Details as per Sl No 27.2 in BOQ

40Hp to 50HP.Details as per Sl No 27.3 in BOQ

Checking the conditions of heating coils & switch gears for the furnace/calciner. Details as per Sl No 28 in BOQ

Cleaning, lubricating, and checking of hooks, clamps, Nuts& bolts, wire rope, chain and replacement (if required) of electric hoist. Details as per Sl No 29 in BOQ

Repair the control circuit of the electric hoist. Details as per Sl No 30 in BOQ

Removing of the unused/damaged cable, rolling out the cables, transport to salvage/scrap yard, after weighing, (with in 200mtr inside the company premises). Details as per Sl No 31 in BOQ

Removing of the unused/damaged cable trays, light fixers, starter and frames, MS structural materials etc., transport to salvage/scrap yard, after weighing, (with in 200mtr inside the company premises). Details as per Sl No 32 in BOQ

Disconnect incomer and outgoing power cable from the Old/damaged PCC/MCC/ MCB-DB panel, Removing the Old/damaged PCC/MCC/ MCB-Band Transport it to salvage/scrape yard after weighing (within 200mtr inside the company premises). Contractor shall remove the copper bus bar from the panel before shifting it to salvage/scrap yard, and handing over to electrical section. Details as per Sl No 33 in BOQ

Installation and commissioning of PCC/MCC panes by connecting all the incoming, & outgoing cables including earthing of the panels. (Approximate size of the panels shall be 2500m x 1800mm x 400mm). Details as per Sl No 34 in BOQ

Up to 6 ways. Details as per Sl No 35.1 in BOQ

Up to 12 ways. Details as per Sl No 35.2 in BOQ

Up to 24 ways. Details as per Sl No 35.3 in BOQ

Fabrication, Painting, Installation of cable tray, cable tray support, street light supports, fixing frames for MCB-DB/starters/remote push station etc. (MS Structural material for the works shall be provided IREL, RED). Details as per Sl No 36 in BOQ

Installation of FRP cable tray. (FRP cable tray for the works shall be provided IREL, RED). Details as per Sl No 37 in BOQ

Cable size (Cu) 1.5Sq.mm/2.5Sq.mm/4Sq.mm Details as per Sl No 38.1 in BOQ

Cable size (Cu) 6Sq.mm/ OR (Al)16Sq.mm. Details as per Sl No 38.2 in BOQ

Cable size (Al) 25Sq.mm/35Sq.mm. Details as per Sl No 38.3 in BOQ

Cable size (Al) 50Sq.mm/70Sq.mm. Details as per Sl No 38.4 in BOQ

Cable size (Al) 95Sq.mm/120Sq.mm. Details as per Sl No 38.5 in BOQ

Cable size (Al) 150Sq.mm/185Sq.mm. Details as per Sl No 38.6 in BOQ

Cable size (Al) 240Sq.mm/300Sq.mm. Details as per Sl No 38.7 in BOQ

Cable size (Al) 400Sq.mm. Details as per Sl No 38.8 in BOQ

Cable size (Cu) 1.5Sq.mm/2.5Sq.mm/4Sq.mm. Details as per Sl No 39.1 in BOQ

Cable size (Cu) 6Sq.mm/ OR (Al)16Sq.mm. Details as per Sl No 39.2 in BOQ

Cable size (Al) 25Sq.mm/35Sq.mm. Details as per Sl No 39.3 in BOQ

Cable size (Al) 50Sq.mm/70Sq.mm. Details as per Sl No 39.4 in BOQ

Cable size (Al) 95Sq.mm/120Sq.mm. Details as per Sl No 39.5 in BOQ

Cable size (Al) 150Sq.mm/185Sq.mm. Details as per Sl No 39.6 in BOQ

Cable size (Al) 240Sq.mm/300Sq.mm. Details as per Sl No 39.7 in BOQ

Cable size (Al) 400Sq.mm. Details as per Sl No 39.8 in BOQ

Laying, dressing and termination of earth strip/earth wire to the earth points on panels, equipment, earth pits etc. as per the requirement. (Earth strip/earth wire and termination sockets shall be provided by IREL, RED on free of cost. Details as per Sl No 40 in BOQ

Measuring, labelling and providing earth pit resistance report for all earth pits.Details as per Sl No 41 in BOQ

Transformer Oil filtration and its associated oil checks (as per IS 1180:2014, IS 1866:2000, IS 1448:1997 with its amendments) and providing report for 500KVA, 11/0.415KV transformers. Details as per Sl No 42 in BOQ

Additional charges for attending back shift breakdown work attending on emergency call basis per team of Supervisor and Electrician (This will be in addition to the respective charges for the work carried out.). Details as per Sl No 43 in BOQ