SPECIAL REPAIRS TO OMQ THAT HAVE BEEN DECLARED DANGEROUS OR OCCUPATION AT AF STN BHUJ

Amount

Demolition including removal of existing damaged, plaster of Column, chajjas, etc including collecting debris on Ground floor..( External/ Internal )

Providing & fixing of M.S. Support and maintaining the same till the work is over including removal of the same

Corrosion Protection by applying Zink rich primer for protection of Structural steel sections/Steel rebars in two coats at Intervals of 8 hrs. after 24 hrs. of applying of feovert.Primer of Krishna Conchem: I.P. Net RB

Corrosion IN- Hibitor by providing and applying/Spraying of Concrete penentrating Corrosion in- Hibitor to the concrete surface primer of Krishna Conchem: EPCO-KP-100

Steel Rebars Fixing by providing, fixing and welding of TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending sprially for hooping for columns hooking ends and binding with including mild steel wire ( annealed ) not les than 0.90 mm dia complete all as specified and directed. where ever required.

Polymer Repairs (PMM) by applying bond coat of Polymer & Cement (1:1) and making good the broken surface of RCC with Polymer mortar up to original concrete surface including curing etc complete Polymer – APCOGUARD / MONOBOND ( Polymer 1 Ltr : Cement 5 Kg : Quartz Sand 15 Kg )

Rendering 15 mm 1:4 cement plaster in Single coat and including mixing of plasticizer ( Supercon-100) (200ml per bag) &Fibremesh) ( 125gms per bag) in the mortar including curing etc complete

Providing and executing injection grouting with polymer rich cement slury including drilling and nozzles.

Providing and fixing scaffolding for repair of external chhajjas including dismentalling

Providing V groove zari and applying 1:1 polymer : cement coat and filling crack with 1:5:15 mortar

Disposal of Debris of collecting and disposal of Debris from site ( Approximate 7.15 Cum)

S&F mild steel anlge iron and FI for Jacketing ,posts and struts in fencing , flat iron as in wind ties for roof including securing bolts, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh and similar work confirming to Fe-290 Gde E-165

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc

M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces.

M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified.

M&L for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair.

Supply only water proofing compound

M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of Acrylic putty by finishing the surfaces even and smooth complete all as specified and directed by EIC.

All as per Item No 3 above but on ceiling.

S & F in repair chicken wire mesh with tack screws of galvanized mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm all as spd and as directed

Supply and fix for hard drawn steel wire fabric square mesh of size 50mm square each with 3mm dia wire, weight not less tha 2.2Kg/Sqm confirming to IS : 1586-1982, on the walls, with minimum 10cm lap to sides and end as required complete all as specified in IS 13935 and directed by Engineer-in-Charge. Note :(i) The net area of mesh, as fixed shall be measured without and extra allowance for lap and weight of spikes which shall be included in rates. (ii)Flat iron supports nut, bolt shall be measured and paid separately.

Complete removal of existing treatment on wall surfaces and applying two coats of exterior emulsion paint all as specified and directed by EIC using any one of following material :- Make Brand Nerolac Suraksha Asian ACE Berger Walmasta

S&F mild steel bolts, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 38Cm long (dia of neck 6mm) Note : Cost of drilling holes for bolts in stone masonary/PCC block masonary shall be included in cost of bolts etc.

Demolition of Precast concrete block walling built in cement mortar

M&L for Precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded and setting in cement mortar 1:6 all as specified and directed

Preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame).

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

S&F Factory made 'Rajshri' PVC internal door frame of the size 120x50 mm with a wall thicness of 5mm PVC celuka sheet Density 600 Kg/cbm maufactured by an ISO 9000 certified company made out of extruded 5 mm PVC celuka sheet mitre cut at two corneres and joined with2nos. of 150mm long brackets of 15mm x 15mm M.S. squaretube. The two vertical door profiles are to be reinforced with 20mm x20mm M.S. tube of 19 guage throughout the frame. The door frame shall be fixed to the wall using 65/100mm long M.S. screws through the frame by using PVC fastners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. complete as per manufactures.

S&F 30mm thick RAJSHRI brand factory made wire mesh solid PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 20mm x 20mm for stiles and 15mm x 15mm for top, lock & bottom rails.20mm x 20mm MS square tubes shall be covered with 5mm thick heat moulded Rajshri PVC 'C' channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be PVC beading on either side forming stiles & 5mm thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on the inner side to form top & bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mmshall be PVC beading on form lock rail. 10mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be of aluminium wire mesh fitted in by 'C' channel is fixed by 20mm x 20mm MS tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with total 8 parts of 15mm x 15mm & 20mm x 20mm tube with aluminium wire 10mm ( 5mm x 2) thick PVC strip of 25mm width is to be stuck & nails on both side of aluminium wire mesh interior at the top, bottom & lock rail. Complete as per direction of Engineer - in charge.

S&F 30mm thick RAJSHRI brand factory made internal PVC one side Moulded & one side prelem door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mm x 20mm for stiles as well as top, bottom & lock rail. The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm thick prelam PVC sheet of density 600kg/cbm mfg by an ISO 9000 certified company, on both side of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton ( made by sticking 2nos rigid foam PVC sheets of 5mm thickness using PVC solvent cement adhesive. 20mm thick PVC sheet to be given for lock provision at lock height, Complete as per direction of Engineer - in - charge.

S&F 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (any number of panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veveered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated..

S&F 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ Gauge etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) complete.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih SS wire staples.

M&L for preparing new or previously untreated surfaces wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface

S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed.

S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.

S&F for mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately. Note : main section of aluminium shall be used 100mmx45MM with same thickness as mentioned in lieu of drg 65mm x 38mm above reffered due to less space available for fixing wire gauge shutter fixing grill

M&L for aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm

M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc.

M&L for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster in CM 1:4 all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06Sqm but n.exc. 0.11Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete as directed by EIC.

M&L vitrified ceramic dark shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete.

M&L vetrified ceramic tiles in vertical surfaces 600 x 200 x 10 mm thick set and jointed in neat cement slurry and pointed in colour cement to match existing tiles and inluding rendering 10 mm thick in cement mortar 1:4 on concrete surfaces as backing coat complete.

M&L in repairs for 20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded.

Taking up on down steel tubing and connection incl cleaning for refining of the following bore of pipe

a) 15mm bore of pipe

b) 20mm bore of pipe

c) 25/32/40mm bore of pipe

S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of Make : Astral or equivalent of Supreme / Finolex)

20mm outer dia of pipes

25mm outer dia of pipes

32mm outer dia of pipes

40mm outer dia of pipes

S&F in repair GI spouts of 40 mm dia pipe , approxly 700mm long in sunken floors including necessary cutting , chipping of walls and making good with PCC 1:2:4 type B0 or cement mortar 1:3 with WPC all as specified and directed

S&F in repair grating doom 125mm dia with waste hole of PTMT (minimum weight 40 grams)

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe

100/110mm dia of pipes

75mm dia of pipe

S&F of PVC(SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls complete

110mm dia of pipe

75mm dia of pipe

S&F of PVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes

110mm dia of pipe

75mm dia of pipe

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls of following size : -

a) 75mm bore

b) 110mm bore

S&F PVC (SWR) bends any radius of following sizes :-

a) 75mm bore

b) 110mm bore

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia.

S&F PVC (HDPE) pipe of 32mm dia with all fittings and fixed complete to walls and ceiling or laid in floors including taking down of old pipes. Make : Astal

S&F of pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock stricke plate etc., complete as specified.

S&F of pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock stricke plate etc., complete as specified.

M&L for reinforced cement concrete type A1 1:1.5:3 using 20 mm graded aggregate as in beams , cantilevers, bressumers lintels over 1.5m span complete all as specified and directed.

M&L for reinforcement cement concrete type A1 1:1.5:3 using 20 mm graded aggregate as in slabs supported on columns and beams complete all as specified and directed.

M&L for reinforcement cement concrete type A1 1:1.5:3 using 20 mm graded aggregate as in chajjas complete all as specified and directed.

M&L for formwork to sides and soffits of suspended slabs such as roof slabs floor slabs landing and similar work n.exc 200 m thick ( horizontal sloping) finished rough and flat complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges

S&F FE 410-Wgde-250 )quality B for Joist,channel,angle,or Tee sections,fixed independently,without connecting plates,etc(cut to ordinary lenghths indicated)

S&F for TMT bars 6 to 8 mm dia and over cut to length bent to shape required including cranking bending sprially for hooping for columns hooking ends and binding with and including mild steel ( annealed ) not less than 0.90 mm dia complete all as specified and directed.

All asper item No. 72 above but 5 mm dia and over upto and including 10 mm dia in strirrups, spacers and binder complete all as specified and directed. .

Demolition reinforcement cement concrete of any descprition and in any position not otherise specifically provided for complete all as specified and directed.

Taking down existing tarfelt from roof including plaster and remove from site complete all as specified and directed .

M&L, PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs/coping/ bed block / depression complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1: 4 on faces of brick work or concrete surfaces with WPC, finished even and smooth W/O using extra cement as in roof. (WPC shall be measured & paid seperately) complete all as specified and directed .

Supply only integral water proofing compound. (ISI marked)

M&L, water proofing treatment on roof and preparing the surfaces to receive WPT treatment , applying cold bituminous primer @ 0.30 ltr / Sqm conforming to IS 3384 applied on plastered surfaces including side walls , followed by a layers of APP based polymeric membrane reinforced with polyster non woven fabric (weighing 3.5 Kg/Sqm(minimum) and 3 mm thick) with mineral finish laid on primed surface by torch application with side overlap 100 mm and ends over laps 150 mm , joints sealed properly as per manufacturers instructions all as specified and directed .

Demolition of cement concrete of any description and any position not otherwise specifically provided for all as specified

M&L for PCC 1:5:10 type D-2 (using 40mm graded aggregates ) filling as mass conc in sunkun floors

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 15 mm thck on concrete surfaces in cement mortar 1:4 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces all as specified and directed by Engr-In- Charge

S&F in repairs Hand health Faucet spray to EWC with PVC nozzle, and PVC flexible pipe etc complete.

S&F in repairs bathroom cabinet PVC frame box type with mirror in front of size 350x450mm with 6 m thick glass fixed to wall with screws complete all as specified and directed by Engineer-in-Charge.Make : Prayag(Cat No :551)

S&F in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of piep. Make : Jaquar, Cat No QQT-7037 or equivalent.

S&F in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe. Make : Jaquar, Cat No - QQT-7053 or equivalent.

S&F in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions. Make : Jaquar, Cat No QQT-7281 or equivalent.

S&F in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions. Make : Jaquar, Cat No - QQT-7167B or equivalent.

S&F in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) with Arm including fixed to steel pipes or union and complete all as specified. Make: Jaquar, Cat No - OHS-1989 or equivalent.

S&F in repairs chromium plated telephone shower with 1.5m long flexible tube & swill wall hook including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - HSH-5537H or equivalent.

S&F in repairs chromium plated metropole flush valve dual flow concealed type woth control cock operation plate 40 mm size including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - FLV-1089Q or equivalent.

S&F in repairs of vitreous China wash basin including pedastal, white, flat back, size 630mm x 450mm including chromium plated waste coupling, plug and chain, necessary brackets. Make : CERA, Cat No 1008 & 1108 or equivalent in Hindaware as approved by GE.

S&F in repairs chromium plated soap dish holder. Make Jaquar, Cat No AQN-7731.

S&F in repairs chromium plated toilet paper holder. Make Jaquar, Cat No AQN-7751 or equivalent.

S&F in repaires chromium plated towel rail 24" long between flanges. Make Jaquar, Cat No AQN-7711 or equivalent.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type) white (excluding, flushing cistern and flush pipe) complete connected to drain make : CERA, Cat No - 2033 & 2315 or equivalent.

S&F in repair sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all sizae 915 x 460 mm, bowl size 410 x 330 x 180 mm mm Make : Nirali (Model : elegance small from regular range, glossy) or size 915 mm x 460 mm bowl size 410 x 330 x 178 mm of make : Jayana (Model : Jujpiter sink with Drain board No: SBSD 5 glossy) or equivalent and nearest size of make : Lorrentto, Neelkanth, Diamond.

Supply and Fixing of Stainless steel 304 Grade Plate Rack made of 1 mm thick stainless steel sheet, overall size 60cm x 90cm for 6 plates as approved by GE. Make: Prayag Cat No P-336 or nearest in Nirali, Neelkant as approved by GE

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC

Taking down main switch including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete.

Taking Down sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut all as directed.

M& L Point wiring complete with 1.5 sqmm (nominal area) PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLS, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes suitable for mounting switches, sockets etc and including PVC insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:- Note:- (a)Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately. (b)Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting PVC conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.

(a) One light point controlled by one, one way switch single pole

(b) One bell point controlled by one, one way switch single pole

(b) One ceiling fan and exhaust point controlled by one, one way switch single pole

(c) One 3 pin 5 Amps socket out let on independent board

(d) One 3 pin 5 Amps socket out let on same board

All as per item No 102 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

M & L in replacement Modular switch 1 way 6A 1 module. Make-Anchor Penta,Havells Reo or equivalent.

M & L in replacement Modular switch 1 way 16A 1module. Make-Anchor Penta,Havells Reo or equivalent.

M & L in replacement Modular bell push 6A 1 module. Make-Anchor Penta,Havells Reo or equivalent.

M&L in replacement Modular socket 6A 5 pin 2 in 1 combined 2 module, 240 Volts.Make;Anchor Penta,Havells Reo or equivalent.

M&L in replacement Modular socket 6/16A twin type 2 module, 240 Volts. Make : Anchor Penta,Havells Reo or equivalent.

M&L in replacement Modular fan step regulator 120W 2 module. Make : Anchor Penta,Havells Reo or equivalent.

S&F in Replacement ceiling rose surface bakelite 65mm x 50mm three terminal all as specified and directed

M & L in replacement Modular white cover plate with frame,1 module. Make-Anchor Penta,Havells Reo or equivalent.

M & L in replacement Modular white cover plate with frame,2 module. Make-Anchor Penta,Havells Reo or equivalent.

M & L in replacement Modular white cover plate with frame,3 module. Make-Anchor Penta,Havells Reo or equivalent.

M & L in replacement Modular white cover plate with frame,8 module. Make-Anchor Penta,Havells Reo or equivalent.

M & L Metal flush box with frame,1 module.

M & L Metal flush box with frame,2 module.

M & L Metal flush box with frame,3 module.

M & L Metal flush box with frame,8 module.

M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multistranded 6 sqmm single core cable 1100 volts grade, FRLS, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed.(Note: Two runs of conductor with one run of earth wire and PVC conduit will be measured & paid as one unit)

S&F isolators of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of the isolator should be the same as that of DB) for the following:

(a) TPN 440 Volts 63 Amp cap C series

(b) SP 240 volts 6-32 Amps Capacity, 'C' series

(c) SPN 240 volts 40 Amps Capacity, 'C' series

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel as shown in electrical plate No.3 of SSR Part-I (2009) complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Taking down the existing ceiling fans / Exhaust fans and re-fixing/hanging the same in position including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down the existing water heater storage type of 25 ltr capacity and deposit to AGE E/M Store yard and re-fixing/hanging the same in position including provision of cable

S & F LED in replacement tube light fitting, 1 x 20 W, LED Integrated Batten T5 indoor decorative aluminium extruded T5 LED Battens - integrated type white complete with all accessories with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make :- C & S, Model :- Nakshatra/20W/W, Cat Part No :- LTTB4F20WLED/W - 4 ft White or equivalent in Bajaj/Havells/CG.

Supply and Fixing in repairs wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make C & S, Model :- Nakshatra/20W/W, Cat Part No :- LTTB2F10WLED/W - 4 ft White or equivalent in Bajaj/Havells/CG.

S&F in Replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps.

S&F in Replacement bell ding dong type 230V single pole

sudarshan builders