PWSS Ghanghore Kafnu Jaral and Marahara in GP Jara Tehsil Nihiri Distt Mandi

Amount

Excavation in foundation trenches etc. in earth all kinds of soil such as pick work jumper work blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming/ chiselling of sides and bed stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:3:6(1cement :3 sand: 6graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete in M30 grade but not lesser than 1:1:2 (1 cement :1 sand : 2 graded stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement and reinforced concrete work in:-(a) foundation and plinth in all leads and lifts.

(b) Wall (any thickness but not less than 0.1m thickness) attached pillasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level.

Providing and laying cement concrete 1:2:4(1Cement :2 sand:4 graded crushed stone aggregate 20mm nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all leads and lifts in :- a)Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level .

Providing and laying cement concrete 1:1.5:3 (one cement :one and half sand : three graded crushed stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in all leads and lifts in (a) Foundation ,footings bases of columns and the like mass concrete including all leads and lifts

(b) walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level in including all leads and lifts .

(a)Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level .

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including certring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete & plain concrete work in all leads and lifts in:-(a) Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like

(b) Foundation ,footings bases of columns and the like mass concrete in all leads and lifts

(c) Flat surfaces such as soffits of suspended floors,roofs, landings and the like in(a) floor etc. upto any thickness.

Providing and fixing precast concrete manhole cover & frame confirming to IS: 12593-1988 Part-1 and IS: 12592-1991, part-II, 600mm diameter, heavy duty complete in all respect.

Fixing of GI pipe light grade for inlet, scour and over flow pipe (Labour rate) of following dias in all leads and lifts.(i) 50mm dia

(ii) 80mm dia

Providing and fixing Gun Metal wheel valves with hand wheel complete in all respect as per the entire satisfaction of the Engineer-in-charge.(i) 50mm dia

(ii) 80mm dia

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: in MS gate all leads and lifts.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: in grauting, framed guard bar, ladders, railing brackets and similar works in all leads and lifts.

Manufacturing, supplying, fabrication and fixing of MS fabricated protection panel 750mmx750mm made with MS angle 40x40x4mm for frame, MS angle 30x30x3mm for cover, MS flat 25x5mm for fixing of sliding door bolt and MS sheet 4.00mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle MS flat & MS sheet embedding in RCC slab by drilling holes in MS angle & in RCC slab provision for providing and fixing sliding door bolt 300x16mm, MS handle 100mm, Lock and applying a coat of red lead paint & painting two coat with steel paint (Firoza Blue) complete job in all repsdct in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

1.80 metre high fencing with 2.50 metre angle iron posts 50x50x6mm 2.50 metre centre to centre with nine horizontal lines and two diagonal of galvanised mild steel barbed wire (IS: 278: 1962 type-I) weighting 9.38 kg/100 metre strained and fixed to posts with 6.1 staples including cost of excavation, post, struts and straining bolts embended in cement concrete 1:3:6 (1 cement : 3 sand:6 graded stone aggregate 20mm nominal size) and curing complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and placing in horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer-in-charge including all leads and lifts. (i) Fine sand screened, cleaned, washed and graded effective size 0.20 to 0.40 with uniformity co-efficient 2 to 3).

(ii) Coursed sand screened, washed and graded from 3mm to 6mm

(iii) Bajari coursed screened, washed and graded from 6mm to 20mm

(iv) Bajari coursed screened, washed and graded from 20mm to 25mm

(v) Broken stone screened washed and graded from 50mm to 75mm

Providing and placing in horizontal layer dry bricks in two layers as specified by the Engineer-in-charge including all leads and lifts. Ist class

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in retaining wall/ breast wall complete in all respect and as per direction and to the entire satisfaction of the Engineer-in-charge.

ANKUSH VERMA

SANJEEV THAKUR

Ashutosh Kaushal

Naresh Kumar