Maintenance of FDR under the jurisdiction of PWD (RnB), Hezamara Sub-division during the year 2026-27/ SH Brick bats filling, Bamboo pallasiding, Gunny bags, clearing and grubbing land, unlined surface drains, maintenance of drains etc. Gr-1

Single bamboo palasiding/walling of whole 2nd class bambo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying with wire complete and struts 1.5 m apart longitudinally and providing bitumen drum sheet walling fixed with nails as per drawing and MORD technical specification caluse 1302.5. A) driven at least 900 mm below ground and 1200 mm above ground on average.

Supplying of 1st class brickbats (jhama) and laying the same in road depression and stretches including spreading one layer of tilla soil to make it good to proper grade and camber and consolidation as per direction of the Engg-in-charge.

Providing and placing gunny / polythene ( of minimum wall thickness of 500 micron ) bags filled with sand (of minmum qty of 0.034 cum ) and properly manually stitched to avoid any leakage of sand as per specification.

Providing and fixing bitumen or tar drum guard posts including two coats of white synthetic enamel paint over a primer coat in the exposed outside surface above Ground level and applying two coats of coal tar on the outside surface below ground level including bottom before placing the same for a depth of 450 mm below ground level filled with earth as per specification.

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Technical Specification clause 201. I. By Manual Means (A) In area of non-thorny jungle

Maintenance of Drains The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, deepening of side drains as well as catch water drains as per MORD technical specification clause 1907.

Surface Drains Construction of unlined surface drains of average cross-sectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307. (I) Surface Drains in Ordinary Soil (A) Manual Means

Maintenance of Earthen shoulder (stripping of excess soil) Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MORD technical specification clause 1903.

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MORD Technical Specification Clause 303.1.