Construction of Source work, CWR and S/Laying of Supply main and all other appurtenant works etc Complete in Kapkot Block Distt Bageshwar Under JJM under Pothing water supply scheme Job-1.

Amount

Supply of all material labour , T&P Construction of Intake Chamber ( 0.6 m x 0.6 )

Supply of all material labour , T&P Construction SCC cum R&F ( 1 m x 1 )

Supply of following size pipe GI (M) including specials conforming to IS-1239 Part-1 including carting, laying, jointing, fixing, and testing of following diameter G.I screwed pipes with specials and fitting under ground outside the building including cutting threading etc.complete. 15 mm dia

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

60 mm dia

Supplly of Wheel/gate and fitting ISI marked class - I as per IS 788/1971 at site of work and fitting at pipe line as required. 20 mm dia

25 mm dia

40 mm dia

15 mm dia

Supplly of Air valves and fitting ISI marked class - I as per IS 788/1971 at site of work and fitting at pipe line as required 15 mm dia

Excavating trenches of required width for pipe cables etc includingexcavation for sockets and dressing of sides, ramming of bottoms depth upto 1.5 m including the soil as required in layrer not exceeding 20 cm in depth including consolodating each deposited layer by ramming watering etc and disposing of surplus excavated soil as directed , within lead of 50 M iin SMB Mix Soil

Medium Rock

Dismanting of following dia screwed and socketed G.I Pipe ,Special and fitting including taking out of dismanted G.I Pipe and special from trenches and stacking them properly within 50.00 m but excluding the cost of earth work 25mm dia

32 mm dia

Relaying of dismantled G.I.Pipe in true alignment in trenches including supply of all materials,labour,T&P etc. complete. 25mm dia

32 mm dia

Provide all material, labour, T&P,construction of wheel valve chambers as per type design.

Provide all material, labour, T&P,construction of Air valve chambers as per type design.

Supply of all material, labour, T&P and construction of following R.C.C. reservoirs as per drawing & design. 2K.L

Providing & fixing 25 litres capacity M.S bucket type chlorinator of standard size with inside glass wooling complete

Providing and laying in position R.R 1:6 (1 Cement : 6 sand mortar) for Protection works

Providing and laying in position R.R Dry for Protection works

Providing and laying in position cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

making connection of G. I Distribution branch with G.I main by providing and fixing and including cutting , bending i/c all

Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bor 86 long weighing not less than 88 gms

MANOJ KUMAR