Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹10.5 L+₹1.1 L (12.1%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tenderer | |
| 3 | L3₹10.9 L+₹1.5 L (16.3%)Rejected-Finance WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
1 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RANIKHET
GE MES RANIKHET
CA NO. GE /RKT/05 OF 2024-2025REPAIR TO CERTAIN BLDGS, PETTY WORK AND PERIODCAL SERVICES TO ALL MD/ OTM ACCN AT KAUSANI UNDER GE RANIKHET
2024_MES_649046_1
GE/RKT/05 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
Kausani under GE Ranikhet
as per NIT
6 documents required · 6 mandatory
₹500
GE RANIKHET
₹30,000
Yes
31 Aug 2024
2 Apr 2024
3 May 2024
2 Apr 2024
1 May 2024
17 Apr 2024
Amount
Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall, fixed self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall, fixed self tapping screws complete all as specified and directed.
S&F galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, with bitumen washer/ screws complete all as specified and directed.
All as per item No. 4 above but except sheeting (any thickness) complete all as specified and directed.
S&F plain, galvanised, 0.63mm mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws in normal/ nainital pattern complete all as specified and directed.
All as per item No. 6 above but except sheeting (any thickness) complete all as specified and directed.
Dismantling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed.
S&F powder coated aluminium anodised snap grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the Main Tee 28x24x3mm thick, cross Tee 28x24x3mm thick and wall angle 24x24x3mm thick sections complete all as specified and directed.
S&F 4 mm thick everest designer ceiling (E-board classic) board/ tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on GI/ aluminium snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed.
S&F in repair 6mm thick decorative PVC sheet hollow (design approved by GE) for insulation and acoustic purpose on wall surface, screw to timber frame work for levelling of wall as reqd, including with panelling to vertical surfaces, fixed with rawl plug and screws complete all as specified and directed.
Taking down old wooden flooring with or without plywood complete all as specified and directed.
S&F for 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions complete all as specified and directed.
All as per item No. 13 above but except material complete all as specified and directed.
M&L in repair 6mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as of any thickness complete all as specified and directed.
Dismantling of boarding, any description fixed in any position like wall ,wooden flooring and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed.
S&F second class hardwood 25 mm boarding plain one side with butt joint fixed with nails in any situation complete all as specified and directed.
Dismatling timber scantling 40 sqcm and above in any position, unframed work complete all as specified and directed.
M&L 2nd class hard wood as in scantling clean sawn as in floor/ roof/ truss/ purlin & similar work of any description in framed work complete all as specified and directed.
Demolition of brick work masonry/ precast block/ stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L for flush pointing to block in course or ashlar masonry or concrete block walling in Cement mortar1:4 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non skid joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.06 sqm but not exeeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.
M&L for glazed ceramic coloured tiles 200mm x 300mm x 7mm thick on wall/ vertical surfaces such as skirting, dados and riser to steps etc including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for PCC type B1, 1:2:4 using 20 mm graded aggregate in cills, steps, parapets , copings, kneelers, apex stones, bed plates, kerbs, flooring, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded, pointed in mortar etc. complete all as specified and directed.
M&L black gGranite (of any type) 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishig types in cooking platforms and like complete all as specified and directed.
Dismantling mild steel or wrought iron work in roof trusses, gratings etc and similar work complete all as specified and directed.
M&L for mild steel work in roof trusses, purlins, rafters, wind ties, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and directed.
M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even and smooth without extra cement on internal wall surface complete all as specified and directed.
M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete all as specified and directed. Note:- WPC will be measured and paid separately.
Supply only integral water proofing compound complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion over a coat of primer complete all as specified and directed.
M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted, plastered or un-plastered surfaces of walls and applying one coat of oil bound distemper white or tinted complete all as specified and directed.
M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted, plastered or un-plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted, plastered or un-plastered surfaces of walls and applying one coat of weather proof exterior emulsion complete all as specified and directed.
M&L for preparation of old decorated surfaces and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated surfaces of plastered or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint complete as in roof complete all as specified and directed.
M&L for preparation of old surfaces of brick/ concrete/ plastered surfaces of wall over 10 cm girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint complete as in door/ gates, windows, railings, structural horizontal & vertical members & similar work complete all as specified and directed.
M&L for preparation of old wooden surfaces and applying one coat of synthetic enamel paint over a one coat of pink primer complete all as specified and directed.
M&L for french polishing two or more coats on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work till to obtain the mirror finish look of the surface complete all as specified and directed.
Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.
Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.
Taking down of shutters of any description not exc 1.0 Sqm each and resecuring or easing and adjusting with refixing in same opening with using of necessary arrengements complete all as specified and directed.
Taking down of shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each and resecuring or easing and adjusting with refixing in same opening with using of necessary arrengements complete all as specified and directed.
Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, and making good with existing surface complete all as specified and directed.
S&F 35 mm thick second class hard wood glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats complete all as specified and directed.
S&F 35 mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F 30 mm thick second class hard wood glazed and skelton window and ventilators shutters open rebated and prepaired to received glass gauge etc divided into square with sash bar edges of framing plain chamfered or rounded fitted with cut and mittered beads for sequring glass gauge etc , size of members of shutters as specified in MES SSR -I section 8 clause 8.24 (b) complete all as spcified and directed.
M&L mild steel work in framed work such as grills, gratings, guard bars etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165 complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel 3 mm thick complete all as specified and directed.
S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F 5.5 mm thick sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel complete all as specified and directed.
S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.
S&F 75 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.
S&F 100 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws complete all as specified and directed.
S&F 150 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws complete all as specified and directed.
M&L for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 100 mm (ISI marked) fixed complete fixed with screws complete all as specified and directed.
M&L for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 150 mm (ISI marked) fixed complete fixed with screws complete all as specified and directed.
S&F mild steel sliding door bolt clip type (ISI Marked) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts, length of bolt 250 mm and fixed with mild steel wood screws complete all as specified and directed.
S&F in repair 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F in repair 100 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws complete all as specified and directed.
S&F in repair 150 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws complete all as specified and directed.
S&F in repair mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 100 mm (ISI marked) fixed complete fixed with screws complete all as specified and directed.
S&F in repair 150 mm (ISI marked) mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt fixed complete fixed with screws complete all as specified and directed.
S&F in repair 250 mm mild steel sliding door bolt clip type (ISI Marked) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts, length of bolt and fixed with mild steel wood screws complete all as specified and directed.
S&F in repair mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.
M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.
S&F in repair 25 mm dia curtain rod/harrison rails,mild steel, chromium plated fancy type fixed with end brackets, stops ,rollers & all connected accessories complete all as specified and directed.
Disconnecting existing water tank setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc cap exc 250 ltr & n. exc 500 ltrs complete all as specified and directed.
Disconnecting existing water tank setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc cap exc 500 ltr & n. exc 1000 ltrs complete all as specified and directed.
Dismantling PVC water tanks and removing from site capacity for exc 250 ltrs but n. exc 500 ltrs complete all as specified and directed.
Dismantling PVC water tanks and removing from site capacity for exc 500 ltrs but n. exc 1000 ltrs complete all as specified and directed.
M&L for rotational moulded polyethylene water storage tank 500 ltrs capacity double layered cylindrical vertical with closed top hoisted and fixed in position including fittings complete all as specified and directed.
M&L for rotational moulded polyethylene water storage tank 1000 ltrs capacity double layered cylindrical vertical with closed top hoisted and fixed in position including fittings complete all as specified and directed.
S&F 20mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed.
S&F in repair 15mm bore ball valve/float valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 15mm dia (min wt 142 grms) complete all as specified and directed.
S&F in repair 20mm bore ball valve/ float valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed.
S&F 15 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall/ floor complete and connecting to water supply pipe line complete all as specified and directed.
S&F 20 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed.
S&F in repair white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (padestal pattern) with seat cover (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and directed.
S&F in repair flushing cistern 10Ltr capacity PVC valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair for wash basins, vitreous china (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F in repair 15 mm dia bib tap cast copper alloy, fancy type chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair fancy type 15 mm dia pillar tap, cast copper alloy, with capstan heads chromium plated screwed down high pressure, with or without letterd HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair brass CP stop valve/ angle valve 15 mm fancy type with long shank and cup fixed complete all as specified and directed.
S&F in repair soap dish tray embedded in wall, vitreous china white, approximate size 160 x 160 x 90 mm complete all as specified and directed.
S&F for PVC connection 15mm size with brass nuts of length 450mm complete all as specified and directed.
S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190 gms) complete all as specified and directed.
S&F in repair 15mm bore fancy type chromium plated central hole wash basin mixer with 450mm long braided hoses,screwed down high pressure with or without lettered hot and cold srcrewed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore fancy type chromium plated wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanged,screwed down high pressure with or without lettered hot and cold srcrewed for iron pipe complete all as specified and directed.
S&F in repair GI nipple 15 mm bore dia for HDPE water tank (Min weight-38 gms) complete all as specified and directed.
S&F in repair GI nipple 20 mm bore dia for HDPE water tank(Min weight-45 gms) complete all as specified and directed.
S&F in repair union brass of 15mm bore dia to connect iron to polyethylene complete all as specified and directed.
S&F in repair union brass of 20mm bore dia to connect iron to polyethylene complete all as specified and directed.
S&F in repair elbow/ tee of 15 mm bore dia brass all ends screwed and fixed complete all as specified and directed.
S&F in repair elbow/ tee of 20 mm bore dia brass all ends screwed and fixed complete all as specified and directed.
S&F in repair 32 to 40 mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.
S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and directed.
S&F PVC (SWR) plain bend 75 mm dia, of any redius with rubber ring joints, complete all as specified and directed.
S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair 15 mm bore fancy type telephonic shower (Health faucet), cast copper alloy, with chromium plated, screwed down high pressure with or without lettered Hot or Cold with lenght not less than 1.0mtr long screwed shanks and fly nuts, screwed for iron pipe/stop value and fixed complete all as specified and directed.
M&L for 75mm dia PVC nahani trap or floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.
S&F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F power coated aluminum (minimum thikness of power coated 50 micron ) work for doors windows, ventilators and partition (fixed portion ) with extruded built up standard tubular section/approriate Z section and other section of approved make confirming to IS 733 and is 1285 , fixing with dash fasteners of required dia and size, inc.necessary filling up the gaps at junction , i.e. at top , bottom and sides with required EPDM rubber/neoprene gasket etc aluminium sections shall be smooth and rust free straight , mitered and jointed mechnicallly where ever required incl. cleat angle . aluminium snap beding for glazing/paneling , C.P brass / stainless steel screws , all complete as per architectural drg and complete all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and directed.
M&L for synthetic enamel paint two coats over a coat of primer including preparation of old plastered/unplastered wall surface (any type) of size 60cmx40cm and writing the following the details with two coats of synthetic enamel paint:- Bldg No____________Vintage____________ Last periodical carried on_____________ Last special repair carried on___________ Addn/Altn last carried on______________
M&L for writing letters or figures (block, roman, Italic or indian) not exc 30cm high (Height of each letter 4cm) complete all as specified and directed.
Joshi Constructions
M/s JS Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .