REPAIRS, RECANNING AND POLISHING AND CERTAIN OTHER MISC MAINTENANCE WORKS OF WOODEN FURNITURE AT MIL STN BHUJ AND GANDHIDHAM UNDER GE ARMY BHUJ

Amount

Removing of old faded cushion cover of seat & back of Sofa Set 5 Seater and S&F new cover for cushion with tapestry cloth as approved by GE of good quality (one Nos of seat and back shall be measured and paid as one set) complete all as specified and directed. (Drg no FD-281)

Removing of old unsv foam cushion and S&F new 100mm thick syentheic cushion of 40 density of make as approved by GE complete of size as given in Drg (one nos of seat and back shall be measured and paid as one set) complete all as specified and directed. (Drg no FD-281; Sofa set 5 seater with cushion)

M&L for prepartion of old polished wooden surface by scrapping and filling canties if any with filler/putty to achieve even and smooth surface, sand papered and applying coat of french polish readymade of brand approved to the sofa set 5 seater to acheive uniform glossy finish to the entire satisfaction complete all as specified and directed. (Drg no FD-281)

Removing of old faded cushion cover of seat & back of Sofa Set 4 Seater and S&F new cover for cushion with tapestry cloth as approved by GE of good quality (one Nos of seat and back shall be measured and paid as one set) complete all as specified and directed. (Drg no FD-281)

M&L for prepartion of old polished wooden surface by scrapping and filling canties if any with filler/putty to achieve even and smooth surface, sand papered and applying coat of french polish readymade of brand approved to the sofa set 4 seater to acheive uniform glossy finish to the netire satisfaction complete all as specified and directed. (Drg no FD-281)

Removing of old unsv foam cushion and S&F new 100mm thick syentheic cushion of 40 density of make as approved by GE complete of size as given in Drg (one nos of seat and back shall be measured and paid as one set) (Drg no FD-281; Sofa set 4 seater with cushion)

Removing of old faded cushion cover of seat & back of Sofa Set 3 Seater and S&F new cover for cushion with tapestry cloth as approved by GE of good quality (one Nos of seat and back shall be measured and paid as one set) (Drg no FD-281)

Removing of old unsv foam cushion and S&F new 100mm thick syentheic cushion of 40 density of make as approved by GE complete of size as given in Drg (one nos of seat and back shall be measured and paid as one set) complete all as specified and directed. (Drg no FD-281; Sofa set 3 seater with cushion)

Removing of old faded cushion cover of seat & back of Sofa Set 2 Seater and S&F new cover for cushion with tapestry cloth as approved by GE of good quality (one Nos of seat and back shall be measured and paid as one set) complete all as specified and directed. (Drg no FD-281)

Removing of old unsv foam cushion and S&F new 100mm thick syentheic cushion of 40 density of make as approved by GE complete of size as given in Drg (one nos of seat and back shall be measured and paid as one set) complete all as specified and directed. (Drg no FD-281; Sofa set 2 seater with cushion)

Removing of the following old broken/unserviceable parts from the Table Peg and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed.

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as specified and directed. (Drg no FD-384; Table peg)

Legs of Table peg. (Drg no FD-384)

Table 900x600x760mm with & without drawers : Removing of the following old broken/unserviceable parts from the item and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed.

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as specified and directed. (Drg no FD-283 & 284)

Legs of Table 900x600mm. (Drg no FD-283 & 284)

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed. (Drg no FD-283 & 284; Table 900x600x760mm with & without drawers)

Table writing : Removing of the following old broken/unserviceable parts from the item and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed.

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as specified and directed. (Drg no FD-275)

Legs of Table writing. (Drg no FD-275)

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as specified and directed. (Drg no FD-275; Table writing)

Bed Plywood Top : Removing of the following old broken/unserviceable parts from the Bed Plywood Top and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg and as directed.

Removing of old unsv existing Plywood Top from the item and S&F new top made of 12mm thick plywood commercial exterior grade of relevant IS of shape and size as per Drg complete all as specified and directed. (Drg no FD-246 & 247)

Removing of old unsv existing unsv teak face plywood 4mm thick from the head board and S&F new 4 mm thick one side teak face on both side of head board with 4mm thick teak wood beading around the head board after repairing the complete head board as per shape and size given in the Drg complete all as specified and directed. (Drg no FD-246 & 247)

Removing of old unsv existing unsv teak face plywood 4mm thick from the foot board and S&F new 4 mm thick one side teak face on both side of Foot board with 4mm thick teak wood beading around the Foot board after repairing the complete Foot board as per shape and size given in the Drg complete all as specified and directed. (Drg no FD-246 & 247)

legs of Bed plywood. (Drg no FD-246 & 247)

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as specified and directed. (Drg no FD-246 & 247; Bed plywood)

Table bed Side : Removing of the following old broken/unserviceable parts from the item and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed. (Drg no FD-276)

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg complete all as specified and directed.

Legs of Table bed side. (Drg no FD-276)

M&L For removing of old usv back ply and S&F new 6mm ply for table bed side of approve make complete all as specified and directed. (Drg no FD-276)

Removing of old unsv existing Bottom from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging complete all as specified and directed. (Drg no FD-276)

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed (Drg no FD-276; Table bed side)

Table Centre : Removing of the following old broken/unserviceable parts from the item and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed.

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as specified and directed. (Drg no FD-274)

Legs of Table center. (Drg no FD-274)

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed. (Drg no FD-274; Table center)

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish including one coat of olive green paint at the steel frame complete all as specified and directed. (Drg no FD-1008; Table 900x600x760mm with drawers steel)

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish including one coat of olive green paint at the steel frame complete all as specified and directed. (Drg no FD-1003; Table officers steel)

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish including one coat of olive green paint at the steel frame complete all as specified and directed. (Drg no FD-1004; Table clerk steel)

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish including one coat of olive green paint at the steel frame complete all as specified and directed. (Drg no FD-1007; Table 900x600x760mm without drawers steel)

Removing of old unsv existing Top from the item and S&F new top made of 18mm thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg duly covered with 22 Gauge Aluminium Sheet with full threaded machine as per Drg including one coat of black paint at the steel frame complete all as specified and directed. (Drg no FD-165(M); Table dining OR steel)

M&L for Removing old UNSV PVC Seat and S&F New PVC Seat as per shape and size Given in the Drg complete all as specified and directed. (Drg no FD-260; Chair CBA special with hand rest)

M&L for Removing old UNSV Hand Board and S&F New Hand Board made of 18mm thick prelaminated board as per shape and size Given in the Drg complete all as specified and directed. (Drg no FD-260; Chair CBA special with hand rest)

Removing the unsv front seat of Chair CB Steel with Arms & S&F new Seat made of first class teak wood with nut & bolt to conduit pipe duly canned as per Drg with black polish complete all as specified and directed. (Drg no FD-75(M))

Removing the unsv back seat of Chair CB Steel with Arms & S&F new Seat made of first class teak wood with nut & bolt to conduit pipe duly canned as per Drg with black polish complete all as specified and directed. (Drg no FD-75(M))

Remove of unsv arm of item and S&F new arm made of first class teak wood as per shape and size given in the drg complete all as specified and directed. (Drg no FD-75(M); Chair CB steel with arms, hand should be black polished)

Prepartion of existing old Steel Surfaces of Chair CB Steel with arms, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Olive Green paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position complete all as specified and directed. (Drg no FD-75(M))

Removing the unsv front seat of Chair CB Steel without Arms & S&F new Seat made of first class teak wood with nut & bolt to conduit pipe duly canned as per Drg with black polish complete all as specified and directed. (Drg no FD-75(M))

Removing the unsv back seat of Chair CB Steel without Arms & S&F new Seat made of first class teak wood with nut & bolt to conduit pipe duly canned as per Drg with black polish complete all as specified and directed. (Drg no FD-75(M))

Prepartion of existing old Steel Surfaces of Chair CB Steel without arms, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Olive Green paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position complete all as specified and directed. (Drg no FD-75(M))

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish. (Drg no FD-255; Teapoy verandah)

Removing of old unsv foam cushion & cover and S&F new 50mm thick syentheic cushion of 28 density covered with approved tapestry Cloth of make as approved by GE complete of size as given in Drg complete all as specified and directed. (Drg no FD-357; Chair dining long back)

M&L for prepartion of old polished wooden surface by scrapping and filling canties if any with filler/putty to achieve even and smooth surface, sand papered and applying coat of french polish readymade of brand approved to the chair dining long back to acheive uniform glossy finish to the entire satisfaction complete all as specified and directed. (Drg no FD-357)

Charpoy GI Pipe with nylon newar FD-220 M&L for removing of old unsv nylon newar and S&F in replacement the new plywood of Charpoy GI Pipe (FD-220) with 12mm thick commercial BWR (07 No of ply) of size given in Drg on charpoy frame as top fixed with 14 Nos nuts bolts and washers (3 Nos on each long rail & 2 Nos on each short rail and two Nos at central rail by bolt header counter sunk machine made size 75mmx5mm with 2 Nos nuts & washers on each bolt & prov of three Nos mild steel flat iron of size 25x6mm having thickness 1.6mm welded to the centre to the charpoy complete all as shown on Drg , specified and directed after repairing of charpoy steel flat iron and leg shall be painted with two coat of silver paint including prepartion complete all as specified and directed.

Pratik Enterprise (BID ID -3477200)

M/s Bombay Novelty Stores (BID ID -3476808)