REPAIR AND MAINTAINANCE OF MISCELLANEOUS FURNITURE ITEMS IN JOSHIMATH, RUDRAPRAYAG, NARENDRA NAGAR AND AT VARIOUS LOCATIONS UNDER GE 871 EWS

Amount

Charpoy GI Pipe Double Bunk

Removing old unserviceable plywood of double sleeping bunk/charpoy and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge

Removing old unserviceable Stiffener and S & F new Stiffener of existing size, shape all as specified and shown on drg with all Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

Removing old unserviceable legs and S & F new legs of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and applying two coat of synthetic enamel painting of Silver Shade by spray painting, complete all as specified and as directed.

Charpoy OR steel (FD/E6/MAP-II/01)

Removing old unserviceable plywood of Charpoy OR steel and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing with nut and bolt in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and applying two coat of spray painting of Olive Green/Black Shade of approved quality paint complete all as specified and as directed

Charpoy GI pipe ( Drg No FD-220)

Long rail made of 32 mm dia GI tubing medium grade ISI marked 1.98 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy fixing in repair complete all as specified and as directed. Make : Jindal/Sintex/Tata

Conversion of 32 mm dia long rail obtained from item No 10 above in two short rail after cutting and two short rail threaded at both ends and fixing with 3 way 32 mm dia existing elbow complete all as specified and as directed.

Conversion of 32 mm dia short rail obtained from item No 11 above in two leg after cutting and two leg threaded at one ends fixing with 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe complete all as specified and as directed.

Three way 32 mm dia GI elbow ISI marked fixing in repaircomplete all as specified and as directed

Check nuts of 32 mm dia ISI marked fixing in repaircomplete all as specified and as directed

12 mm thick BWR phenol bonded commercial plywood of existing size including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood complete all as specified and as directed . Make - Archid Ply/Green Ply/CenturyPly

MS flat of size 40x4mm with two Nos nut & bolts as stiffner shall be fitted for support of plywood fixing in repair complete all as specified and as directed .

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and applying two coat of synthetic enamel painting of Silver Shade by spray painting, complete all as specified and as directed.

Almirah steel medium (FD 67/1032)

Seven lever Lock with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed (Make of Lock- Harrison/Rina/Link)

Handle of 100 mm size chromium plated heavy components of Almirah steel med including dismantling unservicable one complete all as specified and as directed

Three way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and as directed.

Leg made of 1mm thick CRCA sheet duly welded/riveted including dismantling unservicable one all as specified and as directed and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and as directed.

Door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, three way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of shade as approved by Engr-in-Charge, over a coat of primer inside and outside with two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and as shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting).

Shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic enamel paint over a coat of primer of shade as approved by Engr-in-Charge complete all as specified and as directed. .

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Almirah large Steel (FD-67/1031, FD/E6/MAP/18)

Seven lever Lock with duplicate keys components of Almirah steel Large including dismantling of unservicable one all as specified and as directed (Make of Lock- Harrison/Rina/Link)

Handle 100 mm size chromium plated heavy components of Almirah Steel Large including dismantling unservicable one all as specified and as directed

Three way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and as directed.

Leg made of 1mm thick CRCA sheet duly welded/riveted including dismantling unservicable one all as specified and as directed and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and as directed.

Door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, three way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of shade as approved by Engr-in-Charge, over a coat of primer inside and outside with two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and as shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting).

Shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic enamel paint over a coat of primer of shade as approved by Engr-in-Charge complete all as specified and as directed. .

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Steel Almirah Locker with two Partition 91cmX48cmX181.5cm ( FD 11 GE 871 EWS)

Seven lever Lock with duplicate keys components of Almirah Locker with two Partition including dismantling unservicable one all as specified and as directed (Make of Lock- Harrison/Rina/Link)

Handle 100 mm size chromium plated Heavy components of Almirah Locker with two Partition including dismantling unservicable one all as specified and as directed.

Three way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and as directed.

Leg made of 1mm thick CRCA sheet duly welded/riveted including dismantling unservicable one all as specified and as directed and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and as directed.

Door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, three way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of shade as approved by Engr-in-Charge, over a coat of primer inside and outside with two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and as shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting).

Removing the existing unserviceable 20mm dia conduit pipe, S & F new 20mm dia conduit pipe of SS match the existing as specified and as directed in both compartement

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Locker Bed Side Steel (FD-1029)

Handle 100 mm size chromium plated Heavy components of Locker Bed side steel including dismantling unservicable one all as specified and as as per direction of Engr-in-Charge.

Hasp & stapple chromium plated components of Locker steel including dismantling unservicable one all as specified and as directed.

Leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

Door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size, Haps and Staple of approved quality, painting with one coat of synthetic enamel paint shade as approved by Engr-in-Charge over a coat of primer inside and outside with two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall be applied after preparation of surface all as specified and shown on drawing. Note:- All steel surface shall be done with spray painting.

Removing the existing worn out side holder with 20 mm dia aluminium conduit pipe of locker bed side steel and S & F new side holder with 20mm aluminium conduit pipe as per existing. Shape and size shown on drawing all as specified and directed by Engr-in-Charge.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Locker Bed Side Steel( SKD-562 )

Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge.

Removing the existing unserviceable handle and S & F new handle chromium plated 100 mm in Heavy patteren all as specified and directed by Engr-in-Charge

Three way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and as directed. .

Removing the existing worn out side holder and hanging conduit pipe of locker steel and S & F of new side holder and hanging conduit pipe as per existing shape and size shown on drawing complete all as specified and as directed.

Taking down old unserviceable existing lock of locker steel and S & F new lock 7 lever duplicate key complete all as specified and as directed.

Removing the existing unseviceable hinges and S & F new hinges duly welded as per existing shape and size all as specified complete all as specified and as directed.

Door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, Three way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside. And outside with two coat of spray painting of Hammertone paint ( pattern of hammertone shall be 0.06gr silicon/kg) Shall after preparation of surface complete all as specified and shown on drawing. Note :- All steel surface shall be done with spray painting.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including removal of dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Table office officer/clerk steel (FD-84/1003,1004 )

Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system complete all as specified and as directed. .

Leg/stiffener 25 x 25 x 1.6 mm thick made of Mild steel square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer all as specified and as directed.

Taking down old unserviceable existing lock of Table office officer/clerk steel and S & F new lock 6 levers with duplicate keys all as specified and directed by Engr-in-Charge.

Side/back panel made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade of approved quality over a coat of primer both inside and outside including complete all as specified and as directed.

Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around for Table office officer, complete all as specified and as directed.

Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around for Table office clerk, complete all as specified and as directed.

PVC shoe of table including dismantling unservicable one all as specified and as directed.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed

Table 3'X2' Steel with/without drawar

Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated particle board /Particle Board , one side laminated finish including provision of 4mm thick teak wood beading all as specified and directed

Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/Berger approved by Engr-in-Charge.

Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs

Table dinning ORs steel with Aluminium Top

Leg/ center stiffener 25 x 25 x 1.6mm thick made of Mild steel square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion of Table dinning ORs steel including dismantling unservicable one all as specified and as directed.

Table top made of 18 mm hard block Board covered with 1 mm Aluminium Sheet of approved quality fixing in repair complete all as specified and as directed. Make of Board : Archid Ply/ Green Ply/ Century Ply

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green/Black shade of approved quality complete all as specified and as directed.

PVC shoe in Table dinning ORs steel with Aluminium Top fixing in repair, complete all as specified and directed.

Chair tubular Steel with/ without arms (DRG No- 75(M):-

Removing the old cane from seat of chair tubular Steel and re-weaving with new 2 mm wide white colour virgin cane in Godrej pattern as shown in drawing and complete all as specified and as directed by the Engineer-in-Charge. Make-Shah/Primiere/Arihant. (DRG No - FD-75(M))

Description all as per Srl item No. 82 above but back of Chair CB Steel with arms. (DRG No - FD-75M)

Description all as per Srl item No. 82 here-in-before but seat of Chair CB Steel without arms. (DRG No - FD-75M)

Description all as per Srl item No. 82 here-in-before but back of Chair CB Steel without arms. (DRG No - FD-75M)

Replacement of unserviceable arm of chair CB steel with new arms shall be made of best quality Ist class hard wood teak, free from knots, infection, as per drg duly painted with two coats of black synthetic enamel paint over a coat of pink primer. (DRG No - FD-75M)

Replacement of unserviceable wooden frame of seat of chair CB steel with/without arm with new wooden frame of seat shall be made of best quality Ist class seasoned hard wood, free from knots and infection, having 04 Nos machine nuts and bolts of size 100x4 mm with washer to Chair CB Steel with/without arms of required size and shall be painted with two coats of black synthetic enamel paint over a coat of wood primier all as shown on drg and as directed by Engr-in-charge. (DRG No - FD-75M)

Replacement of unserviceable wooden frame of back of chair CB Steel with/without arm with new wooden frame of back shall be made of best quality Ist class seasoned hard wood, free from knots and infection,having 04 Nos machine nuts and bolts of size 100x4 mm with washer to Chair CB Steel with/without arms of required size and shall be painted with two coats of black synthetic enamel paint over a coat of wood primer all as shown on drg and as directed by Engr-in-charge. (DRG No - FD-75M)

MS flat stiffner of size 25x3mm with two piece nut & bolts as stiffner shall be fitted for support of seat fixing in repair complete all as specified and directed..

Removing denting from steel frame and wooden surface wherever required and making the surface smooth after removing old paint by Grinding machine and by removing existing treatment completely and apply a coat of red oxide primer , filling putty at required places and spray painting in OG/Grey/white/black shade (as required) with two coats of 1st quality synthetic enamel paint of following Makes :- Asian/Berger/Nerolac along with Supply and fixing PVC toes/plug to chair CB steel with/without arms of standard approved quality. (DRG No - FD-75M)

Chair writing steel MAP (FD/E6/MAP/12 & TP)

Removing old unserviceable cushion and tapestry of seat from chair and supply & fixing of new cushion and tapestry of seat as per sample approved, complete all as specified and directed as per Engineer -in- Charge.

Description all as per Srl item No. 92 above but back rest of Chair writing steel MAP complete.

Cleaning of steel surface of Chair writing steel MAP and making good old surface and applying two coat of black synthetic enamel paint complete all as specified and directed

New arm of Chair writing steel MAP of suitable size and design as per orignal pattern of different make and model all as specified and directed by the Engineer –in- charge.

Replacement of unserviceable rubber shoes of Chair writing steel MAP with new rubber shoes all as specified and directed by the Engineer –in- charge.

Chair easy cushioned FD-358 (m)

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

Providing new cushion on back rest & Seat of appropriate size of cool foam complete with dismantling old one with first class raxine/tepstray cloth as per sample held with GE. Make- Sleepwell/Featherfoam

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Chair Dining (Drg FD-228, 262, 270 & 279,FD/MAP-II/04)

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back/side rails and S&F new front/back/side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable centre/side stiffner and S&F new centre/side stiffner made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Stainless steel 100 mm long ‘L’ type bracket of Chair dinning all as specified and as per direction of Engr-in-Charge.

Chair writing/CBA (Drg No FD-202/ 250/285,FD-280):

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back/side rails and S&F new front/back/side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable centre/side stiffner and S&F new centre/side stiffner made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Stainless steel 100 mm long ‘L’ type bracket of Chair writing complete all as specified and directed.

Chair easy FD-229, DB-4174 :

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Re-canning of Chairs (FD-228, FD-224, FD-274, FD-250, FD-75, FD-228 along with removing of old/broken/unserviceable plastic cane and re-canning of chair dining, chair CB without arms/chair writing, chairs CB with arms, chairs writing, chair CB office, chairs easy FD/NF, with 2.00 to 2.5mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godrej pattern.

SOFA SET 4/5 SEATER(FD-281,FD/MAP-II/02,TP)

Removing the old worn/torn out cushion from sofa sets 4/5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality. Make : Sleepwell/Feather foam/sheela foam. Note:-Cushion should be brought in original packing & Stitching should be done at BSO yard.

Removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.

Removing unserviceable broken Front/Rear Legs of sofa set 4 and 5 seater and S&F New Front/rear Legs to match the original complete all as specified and directed.

Removing unserviceable broken battens of sofa set of 4 and 5 seater and S&F new battens to match the original complete all as specified and directed.

Removing unserviceable broken front/back rail for three seat of sofa set of 5 seater and S&F new front/back rail to match the original complete all as specified and directed.

Removing unserviceable broken front/back rail for single seat of sofa set 4 seater and to match the original complete all as specified and directed.

Removing unserviceable/ broken hand rest of sofa set 4 and 5 seater and S&F New hand rest to match the original complete all as specified and directed.

Preparation of sufaces of sofa set 4 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish to obtain a glossy finish all as specified and directed.

M&L for preparation of sufaces of sofa set 5 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

SOFA SET 5 SEATER Special (TP)

Removing the old worn/torn out cushion from SOFA SET 5 SEATER Special (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality complete all as specified and directed. Make : sleepwell/Feather foam

Removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from SOFA SET 5 SEATER Special (TP) and providing new tapestry cloth cover of approved shade & quality with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as specified and directed.

Removing unserviceable/ broken Front Legs of SOFA SET 5 SEATER Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.

Removing unserviceable/ broken rear legs of SOFA SET 5 SEATER Special (TP)and S&F new rear leg to match the original complete all as specified and directed.

Preparation of surfaces of sofa set 5 seater special(TP) by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

Table Centre 2 Tier / Table Centre (FD-235, 274)

Removing of old U/S existing top from center table 2 Tier and S&F new top of size as per drg. Top shall be 18 mm thick preliminated Particle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood complete all as specified and directed..

Removing of old U/S existing bottom shelf from center table 2 Tier and S&F new bottom shelf of size as per drg. bottom shelf shall be 18 mm thick preliminated Particle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood complete all as specified and directed..

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item complete all as specified and directed.

Removing of old unserviceable long rails and S&F new long rails made out of seasoned shisham/teak wood all as per drg complete all as specified and directed..

Removing of old unserviceable short rails and S&F new short rails made out of seasoned shisham/teak wood all as per drgcomplete all as specified and directed.

Stainless steel 100 mm long ‘L’ type bracket of table centre complete all as specified and directed.

Preparation of wooden surfaces of the Center Tabel with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified complete all as specified and directed..

Chair dinning With long High back (Drg No FD-357)

Dismantling of Old unserviceable rear legs of chair Dining High back and S&F of new legs made out of Ist class hard wood (teak) including hard rubber shoes provided at bottom of legs with screw complete all as specified & directed by Engr-in-charge.

Description all as per item No. 153 above but front legs of chair Dining High back complete all as specified and directed..

Description all as per item No. 153 above but back Support of chair Dining High back complete all as specified and directed.

Removing of old unserviceable leatherite & cushion from seat of chair Dining High back and replacing the same with new leatherite & cushion of 32 density complete all as specified and approved by Accepting Officer.

Removing of old unserviceable leatherite & cushion from back of chair Dining high back and replacing the same with new latherite and cushion complete all as specified and approved by accepting officer.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Stainless steel 100 mm long ‘L’ type bracket of chair dining complete all as specified and directed..

Bed Hard Steel MAP (FD/E6/MAP/08R )

Taking out old U/S ply from Bed Hard (FD/E6/MAP/08(R) and S&F new 12mm thick plywood BWR grade alongwith 10 Nos of nut and bolts of appropriate size in each bed complete all as specified and directed by Engr-In-Charge. Make : Green ply/Century ply/archid ply.

Taking out old & unsv particle board inside head board/foot Board of the Hard Bed and S & F new made out of 18mm thick pre-laminated particle board including 1mm thick PVC beading all around with fevicol with screw at head board/foot Board all as specified and directed by Engr-in-Chrge.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Peg Table (Drg FD- 25, 277 & 384)

Taking out old unserviceable top and S&F new top of table peg made out of 18/19mm thick Exterior Grade prelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer-in Charge.

Taking out unserviceable long rail of Peg Table and providing new long rail of Ist class hard wood [Teak ] complete all specified and directed.

Description all as per item No. 165 above but short rails of peg table complete all as specified and directed.

Description all as per item No. 165 above but legs of peg table including hard rubber shoes provided at bottom of legs with screw complete all as specified and directed..

Description all as per item No. 165 above but center/side stiffner of peg table complete all as specified and directed..

Stainless steel 100 mm long ‘L’ type bracket of Peg table complete all as specified and directed..

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Dining 6/8 Persons (Drg FD-30, 239, 273 , 376 & FD/MAP-II/03)

Taking out unserviceable top and S&F new top of 1500 mm x 900mm for dining table 6 Person made out of 18/19mm thick Exterior Grade prelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer-in Charge.

Description all as per item No.173 above but Top size 1800 x 900 mm of Table Dining 8 persons complete all as specified and directed..

Taking out unserviceable long rail and S&F new long rail of Ist class hard wood [Teak ] complete all as specified and directed for Table Dining 6 person complete all as specified and directed...

Description all as per item No. 173 above but long rail of Table Dining 8 persons complete all as specified and directed.

Description all as per item No. 173 above but short rail of Table Dining 6/8 persons complete all as specified and directed..

Description all as per item No. 173 above but support (stiffner) of Table Dining 6/8 persons complete all as specified and directed..

Description all as per item No. 173 above but legs of Table Dining 6/8 persons including hard rubber shoes provided at bottom of legs with screw complete all as specified and directed.

Stainless steel 200 mm long ‘L’ type bracket of Table dinning complete all as specified and directed.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Dressing Gents with mirror (Drg FD-230, FD/E6/MAP/16) :

Taking out unserviceable top / bottom of table dressing Gents with mirror and S&F top and bottom made out of 18/19mm thick Exterior Grade prelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed.

Description all as per item No. 183 above but side/middle of table dressing gents with mirror.

Description all as per item No. 183 above but Back alongwith 04 Nos of fastener nut and bolts of appropriate size to be installed at the wall in Md accn of table dressing gents with mirror complete all as specified and directed..

Taking out unserviceable mirror & mirror frame of Table dressing Gents and S&F new mirror of 5.5 mm thick with teak wood frame & wall hanging hook and back made of 6mm thick ply wood commercial BWR Gde-I complete all as specified and directed. Make : SAINT GOBIN / Modiguard /Atul

Taking out unserviceable mirror & mirror frame of Table dressing Gents MAP and S&F new mirror of 5.5 mm thick with teak wood frame & magantic catcher and back made of 12mm thick ply wood commercial BWR Gde-I complete all as specified and directed. Make : SAINT GOBIN / Modiguard /Atul

Taking out unserviceable glass shelf of Table dressing Gents MAP and S&F new glass shelf of 6 mm thick with vaccum rubber & hanging/supporting hook.

Supply & fixing new drawer of table Dressing gents made out Ist class hard wood [teak] with bottom of 6mm thick commercial plywood with replacement of 40 mm dia aluminium andozied/ SS fancy type in drawer complete all as specified and directed.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed.

Stainless steel 12 inch long ‘L’ type fancy bracket with Fastener nut and bolts to be installed at the wall in Md Accn of Table Dressing gents complete all as specified and directed.

Teapoy (Drg FD- 341 (M), 278, 382) :

Taking out unserviceable top and S&F new top of teapoy made out of 18/19mm thick Exterior Grade prelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer-in Charge.

Taking out unserviceable long rail and providing new long rail made out of Ist class hard wood [teak ] complete all as specified and directed.

Description all as per item No. 193 above but short rail of Teapoy complete all as specified and directed..

Description all as per item No. 193 above but legs of Teapoy including hard rubber shoes provided at bottom of legs with screw complete all as specified and directed..

Stainless steel 100 mm long ‘L’ type bracket of Teapoy complete all as specified and directed.

Description all as per item No. 193 above but center/side stiffner of Teapoy complete all as specified and directed..

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Computer ( Drg : FD/E6/MAP/03 & TP)

New top of table computer made out of 18mm pre-laminated Particle board exrerior grade of approved shade along with PVC beading all round with fittings and fixtures with matching shade including dismantling unserviceable one all as per existing pattern and drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged UPS shelf of computer table and supply & fixed of new UPS shelf made out of 18mm pre-laminated particle board of approved shade along with PVC beading all round with fittings and fixtures required shape & size and fixed the same properly as per existing pattern and drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged drawer of computer table and supply & fixed of new drawer made out of 18mm pre-laminated Particle board of approved shade along with telescopic channels with ball for easy movement including lock and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly as per existing pattern and drg and as directed by Engr-in-Chrge.

New keyboard tray of table computer made out of 18mm pre-laminated particle board of approved shade along with telescopic channels with ball for easy movement including dismantling unserviceable one all as per existing pattern and drg and as directed by Engr-in-Chrge.

Preparation of tighting loose joints with L shaped interconneted servo bracket alongwith PVC/Steel standing shoe including preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Bed Hard Wooden (Drg FD-246/247) :

Taking out unserviceable top of bed plywood and Supply & Fixing new one of commercial plywood 12mm thick size 6’-3” x 3’ (BWR type) fixed with MS screw including tightening of loose frame/assembling of loose component complete all as specified & directed by Engr-in-charge.

Taking out unserviceable head board of Bed Hard and providing new ones & fixing of five hard wood battan (Horrizental and vertical) covered both side with 4mm thick veener ply wood one side teak face fixed with MS screw,fevicol and nails including teak wood beading 6mm thick to all sides of board complete all as specified & directed by Engr-in-charge.

All as per item No.208 above but foot board of Bed Hard complete all as specified and directed..

Taking out unserviceable long rails of Bed Hard and providing new Ist class hard wood (teak) long rails of the existing pattern and size to the bed complete all as specified and directed.

Description all as per item No.210 above but short rails of Bed Hard complete all as specified and directed..

Description all as per item No.210 above but legs of Bed Hard complete all as specified and directed..

Description all as per item No.210 above but stiffners of Bed Hard complete all as specified and directed..

Flat Iron 25 x 4mm L-Shaped stiffeners 200mm long on either side fixed with screw at a junction of long rail, short rail, foot and head Board of Bed hard complete all as specified and directed.

MNF fixing arrangement on Head board and foot board of bed plytop with brass screw 25 mm long round head two numbers each side fixing in repair complete all as specified and directed.

MNF set of 19 mm rectangular tube made in T fashion (with end plugged with 1.2 mm MS sheet) welded on Head board and foot board of bed plytop alongwith duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed.

Note no 1:- Above unserviceable parts of existing wooden/Steel furniture shall be removed and replaced/repaired carefully without disturbing the adjoining parts including tightening, screwing, glueing, nailing wherever applicable and work will be executed where the furniture exists at BSO furniture yard of GE 871 EWS and Various locations at Joshimath,Rudraprayag Tapovan, Gauchar, Harshil, Sukhi, Tekla, Nelong, Mana, Auli and Narendra Nagar etc.under jurisdiction of GE 871 EWS as directed. Note no. 2 :-Area of Maintainance can be increaesed/decrease as per direction received by higher authority.

Amount of Schedule of credit of Rs 30,282.75 mentioned in tender documents shall be deducted from quoted amount.

m/s RC punetha (BID ID -3239988)

M/S KS Shahi and Sons (BID ID -3240981)