UPGRADATION FOR WORLD HARITAGE TOURISAM AT DHOLAVIRA TA.BHACHAU AND PROVIDING TOURISAM FACILITIES (TOILET UNIT AND PAVING BLOCK ) AT VILLAGE VRAJVANI TA.RAPAR

NAME OF WORK:- UPGRADATION FOR WORLD HARITAGE TOURISAM AT DHOLAVIRA TA.BHACHAU

AND PROVIDING TOURISAM FACILITIES (TOILET UNIT AND PAVING BLOCK ) AT VILLAGE VRAJVANI

BILLOF QUANTITIES

(A) Percentage Rate Tender (Upto INR 50 Cr)

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

1 Excavation for foundation upto 1.5m depth including sorting out and 54.00 Cmt. 157.33

stacking of useful materials and disposing of the excavated stuff upto

50m lead. (B) Dense or hard soil.

2 Providing and Laying cement concrete 1:3:6 (1-Cement 3-Coarse sand - 96.00 Cmt. 3025.99

6-Hand broken stone aggregate 40mmnominal size) and curring

complete excluding cost ofform work in (a) Foundation and plinth.

3 Providing and laying cement concrete 1:1.5:3 (1 Cement : 1.5 coarse 4.50 Cmt. 4558.05

sand :3 graded stone aggregates 20m.m. nominal size) and curring

complete excluding cost of form work and reinforcement for

reinforced concrete work in : (a) Foundation footing base of columns

and mass concrete etc comp.

4 UnCoursed rubble masonary with hard stone of approved quality in 16.40 Cmt. 2628.91

foundation and plinth in cement mortar 1:6 (1-Cement 6-Course

sand)including levelling up etc. complete

5 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 1.5- 0.90 Cmt. 12156.87

Coarse sand 3-Graded stone agg. 20mm nominal size) and finishing

but excl. the cost of reinfor RCC work in Column having C/S area .05

6 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 1.5- 3.80 Cmt. 10914.44

Coarse sand 3-Graded stone agg. 20mm nominal size) and finishing

but excl. the cost of reinfor RCC work in Column having C/S area

7 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 1.5- 3.60 Cmt. 11132.69

Coarse sand 3-Graded stone agg. 20mm nominal size) and finishing

but excl. the cost of reinfor RCC work in Beam having C/S area .05 to

8 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 1.5- 8.20 Cmt. 8360.13

Coarse sand 3-Graded stone agg. 20mm nominal size) and finishing

but excl. the cost of reinfor RCC work in Beam having C/S area 0.12 to

9 Filling in plinth with sand under floors including watering, ramming, 23.80 Cmt. 481.80

consolidating and dressing etc. Complete.

10 Precast concrete block masonary(including quion blocks jamb 2.90 Cmt. 3771.97

blocks,closer) with solid concrete blocks of approved size made of

cement concrete 1:3:6 mix (1 cement:3 coarse sand:6 graded ston

aggregate of 20mm and down guage) for foundation and plinth level

11 Precast concrete block masonary(including quion blocks jamb 24.80 Cmt. 4121.93

blocks,closer) with solid concrete blocks of approved size made of

cement concrete 1:3:6 mix (1 cement:3 coarse sand:6 graded ston

aggregate of 20mm and down guage) for super structure above plinth

level in C.M. 1:4

12 Precast concrete block masonry in partition walls 10 cm. thick with 0.90 Smt. 676.85

solid block of approved size (including quion blocks Jamb blocks closer

etc.) made of C.C.1:3:6 (1- Cement : 3- coarse sand : 6 graded stone

aggregates 20 mm and down grade) (A) in C.M. 1:4.

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

13 Providing and laying ordinary cement conctere 1:1.5:3 (1 cement :1.5 0.40 Cmt. 4876.02

coarse sand:3 stone agg.20mm nominal size) and curing

comp.incl.cost of form work in sill and sides (R.C.C.Band) but.excl.the

cost of reinforcement. (R.C.C.Band)

14 Providing and laying ordinary cement conctere 1:1.5:3 (1 cement :1.5 0.70 Cmt. 10589.02

coarse sand:3 stone agg.20mm nominal size) and curing

comp.incl.cost of form work in sill and sides for R.C.C intel incl.

Finishing smooth with curing comp.incl.cost of form work but.excl.the

cost of reinforcement. (R.C.C.Band)

15 Providing & Laying cement concrete 1:1.5:3 (1-Cement 1.5-Coarse and 0.15 Cmt. 6998.26

3-Graded nominal size) for reinforced conc. Chhajas not excluding

cm thickness upto floor two level incl. Finishing the exposed surface

with cement mortar 1:3 (1-Cement 3-Fine sand to give a smooth

surface centering and form work and curing comp. excl. the cost of

16 Providing and laying ordinary cement conctere 1:1.5:3 (1 cement :1.5 11.20 Cmt. 7258.19

coarse sand:3 stone agg.20mm nominal size) and finishing smooth

with curing etc. complete including the cost of form work

butexcluding the cost of reinforcement for R.C.C. work in Slabs having

more than 10 cm & :upto 13 cm thickness.

17 Providing TMT Bar FE 500D reinforcement for R.C.C.work including 4249.00 Kg. 77.29

bending, binding and placing in position complete upto floor two level

18 Pro. And Fixi. In position M. S. angle 40 x 40 x 5 mm angle frame for 7.88 Smt. 3160.42

door and 35 x 35 x 5 mm angle frame for shutter with 16 guage M. S.

sheet welded to shutters frame as per approved drawigs and design

including a coat of priming coat of red oxide and two coat of oil paint

including all necessary fittings, Fixtures, Locking arrangement etc.

19 Providing and fixing 35 mm thick shutters for Doors, windows and 6.53 Smt 5338.3

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

size including black enamelled iron oxidixed fixtures and fastenings

including primer coat of approved quality and two coats of oil painting

etc, complete. (ii) Fully Panelled.

20 Providing and fixing M.S. grills of required pattern to wooden frames 87.00 Kg. 109.08

of windows etc. with M.S. flats at required spacings and frame

alround, square or round bars with round headed bolts and nuts or by

screws (A) Plain Grill.

21 Providing upto floor two level precast cement concrete jali or grill 2.52 Smt 768.18

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm

nominal size) reinforced with 1.6 mm dia. Mild steel wire including

roughening,cleaning, fixing and finishing in cement mortar 1:3 and

curing complete. (A) 50mm thick

22 Providing 15 mm. Thick cement plaster in single coat on similar side 242.00 Smt 180.40

Brick/concrete half walls for interior plastering upto floor two level

and finished even and smooth in CM 1:3 (1 cement : 3 sand)

23 Providing 10 mm. Thick cement plaster in single coat on ceiling and 84.70 Smt 161.53

sofits of stairs interior plastering upto floor two level and finished

even and smooth in CM 1:3 ( 1 cement : 3 sand )

24 20mm. thick sand faced cement plaster on walls upto height 10meters 134.00 Smt 315.69

above ground level consisting of 12mm. thick backing coat of c.m. 1:3

(1cement : 3 sand) and 8mm. thick finishing coat of c.m. 1:1 (1cement

: 1 sand) etc. complete.(

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

25 Providing and laying ceramic tiles 30cmx30 cm size coloured glazed 17.70 Smt 963.12

tiles 6mm thick in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement

26 Providing and laying ceramic tiles 30cmx45 cm size coloured glazed 78.40 Smt 1090.32

tiles 6mm thick in skitrting,risers of steps and dado on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement

27 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 56.40 Smt 1120.36

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement..

28 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 4.10 Smt 1195.02

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry..

29 Providing and laying broken chine mosaic flooring for terrace using 12 54.00 Smt 779.7

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including rounding off

junctions and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed..

30 Finishing wall with water proffing cement paint of on wall surface 191.50 Smt 60.80

(two coats) to give an approved brand and manufature and of

required shape even shade after thoroughly brushing the surface to

remove all dirt and remains of loose powdered materials.

31 Distempering (two coats) with oil bound distemper of approved brand 190.90 Smt 76.68

& manufacture & of required shade on wall surfaces to give an even

shade,over & including a priming coat with a distemper primer of

approved brand & manufacture after thoroughly brushing the surface

free from mortar dropping & other foreign matter & also including

preparing the surface even & sand papered smooth.

32 Providing and fixing water closet squatting pan (Indian type W.C. pan) 2.00 No. 1439.67

size 580mm. (Earth work, Bed concrete foot rests and trap to be

measured and paid for separately) (A) Vitereous china. (i) Long patter

white colour inclproviding and fixing 100mm size "P" or "S" trap for

water closet squatting pan including joininting the trap with pan and

soil pipe in cement mortar 1:1 ( 1 cement: 1 sand)

33 Providing and fixing Urinal or approved quality including conecting the 2.00 No. 1074.86

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat

back or corner type size 430mm x 260mm x 350mm.

34 Providing erecting and fixing double coated ISI water tank of required 1000.00 Lit 3.95

capacity each with all necessary fittings and connection etc. complete

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

35 Constructing brick masonry chamber for underground C.I. Inspection 3.00 No. 2932.93

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line

36 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 4.00 No. 586.27

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

37 Providing and laying (Two level or slopes) and jointing with stiff 15.00 Rmt. 317.47

mixture of cement mortar in proportion 1:1 salt glazed stone ware

pipes following nominal internal150mm diametres including testing of

pipes and joints etc. complete.

38 Providing and fixing cast iron spigot and socket soil,waste and 6.00 Rmt. 741.01

venulating pipes of the following nominal size. (B) 75mm. dia.

39 Providing and fixing in position cowel vent to pipes (I) 75mm. dia. 2.00 No. 393.04

40 Providing and fixing screw down bib taps of following size : (B) Brass 5.00 No. 158.86

chromium plated screw down bib tap (I) 15mm. dia.

41 Providing and fixing gun metal check or non - return fullway wheel 2.00 No. 420.63

42 Providing and fixing gun metal check or non - return fullway wheel 3.00 No. 203.82

43 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 30.00 Rmt. 82.85

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(A) 20mm

44 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 18.00 Rmt. 126.47

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(A) 32mm

45 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 2.40 Rmt. 280.23

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)75 mm

46 Providing and fixing chromium plated brass half trun flush cock of 2.00 No. 275.76

approved quality including fixing in pipe line etc. complete.(iii) 32mm

47 Providing sock pit of 5.0 Cu.mt. volume incl -udingexcavating and 1.00 No. 3205.04

filling brick bats with dry masonarywork at top for 45cm. height

including covering the topwith stone including providing vatas in cm.

1:3 withfinishing curing etc.complete as directed.

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

48 Box cutting the road surface to proper slope and camber for making a 154.00 Cmt. 109.24

base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto 50Mt.lead.

49 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 768.00 Smt 706.93

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for evelling

and filling the joint with sand in proper line and level as per guidlines

of IRC : SP 63-2018 etc. Complete.

50 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 8.00 Pt. 449.45

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. Cat.III (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete

Light Pt. cat lll

51 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 4.00 Pt. 629.23

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in below type of pipe erected with 6A

Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories

with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete cat lll

52 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook 4.00 Ea 18.18

53 Supplying & erecting fan hook box of 10 mm M.S. round bar 4.00 Ea 108.07

bounded to the RCC bars up to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

54 Point wiring for on board Looped Plug with 6A Modular type switch & 4.00 Pt. 241.39

5 pin socket erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories

55 Providing following type of Modular Type Accessories mounted with 4.00 Ea 49.49

PVC / metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

charge. (9) 16 Amp. SP one way switch cat lll

56 (10) 6/16Amp. Universal socket cat lll 4.00 Ea 224.22

57 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 20.00 Mtr. 23.23

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner as

directed (b) 20 mm

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

58 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 20.00 Mtr. 78.78

marked stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

59 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 4.00 Nos. 758.51

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaireefficacy> 100 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.)

make LED used for luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver

(d) 22-24 Watts, Surge - 2KV,IP-20, 4 feet

60 Providing and erecting Approved make Ceiling fan with double ball 2.00 Nos. 1596.81

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

61 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. 5.00 Mtr 108.07

Pipe down rod erected duly painted for fan complete with proper

insulation without leakage and earthing.

62 Providing & erecting 240 V MCB double pole switch for motor & 2.00 Nos. 330.27

inductive load (C Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following capacity (B) 40 Amp. Cat-

63 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 Nos. 867.59

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (a) single door (IP-30)

64 providing and erecting Miniature circuit breaker single pole 6A to 2.00 Nos. 112.11

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat lll

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

65 Supplying & erecting earth pit of minimum bore dia.150mm size 1.00 Ea 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report must be

submitted.a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

66 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 0.50 Kg 77.77

I/We am/are willing to carry out the work at............... % above/ below Percent (Should be written in figures and

words ) of the estimated rate mentioned above.Amount of my /our tender works out as under .

Estimated amount put to tender Rs.21,04,011.46 Estimated amount put to tender Rs.21,04,011.46

Deduct …………………..% below Add …………………..% Above

1 The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In –

Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement

Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.

Executive Engineer

R & B Panchayat Division

Signature of the Contractor. Bhuj - Kachchh