REPAIRS AND REPLACEMENT OF STEEL GATES, PILLARS AND CATTLE TRAP AT CERTAIN LOCATIONS AT AF STN SURYALANAKA

Amount

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep for foundations etc, or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.50 m in depth and getting out in soft/ loose soil complete all as specified and as directed.

Demolition of Brickwork built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Demolition of reinforced cement concrete as in columns/ pillars and footing etc of any description and in any position including reinforcement cut as required to facilitate demolition complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any description and in any postion not otherwise specifically provided for including disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and as directed.

Dismantling of structural steel work, mild steel etc in doors, gates, cattle traps etc complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for Brick work with sub-class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius build in cement mortar 1:6 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping and like including weathering, slightly rounded for chamfered angles and throating complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying tow coats of cement base paint, white or tinted over a coat of priming coat complete all as specified and as directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing excavated materials not exceeding 50 m and deposting where directed at a level not exceeding 1.50 m above the starting point complete all as specified and as directed.

M&L for mild steel deformed TMT bars 10 mm dia and over as in reinforcement to concrete cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia wire complete all as specified and as directed.

M&L for mild steel deformed TMT bars 8 mm dia as in reinforcement to concrete cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia wire complete all as specified and as directed.

M&L for mild steel deformed TMT bars 8 mm dia and upto 10 mm dia as instirrups & spacers, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia wire complete all as specified and as directed.

M&L for reinforced cement concrete type B-1 1:2:4 mix (using 20 mm graded stone aggregates) as in foundations, footings, foundation beams etc complete all as specified and as directed.

Use and removable of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides & soffits of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for reinforced cement concrete type B-1 1:2:4 mix (using 20 mm graded stone aggregates) as in columsn, pillars, piers, posts and struts etc complete all as specified and as directed.

Use and removable of steel formwork to sides of pillars, posts, struts, piers, columns ans stanchions square, rectangular for rough finished surfaces flat complete all as specified and as directed.

S&F Fe-290 Gde E-165 Rolled mild steel joist, channel angle or Tee sections fixed independently without connecting plates etc as in cattle traps complete all as specified and as directed.

S&F Fe-290 Gde E-165 Rolled mild steel sections as in framed work for doors or gates of angle or other section wioth gusset plates, rails, braces, etc complete, drilling for fixing of steel sheeting or other covering, doors etc to be prepared for handing or sliding with & including either hooks & hinges or steel hangining door fittings & hangining also fastening & fixing complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth, and applying two coats of synthetic enemal paint over a coat of red oxide or zinc chrome primer complete all as specified and as directed.

S&F 1.60 mm thick mild steel black sheet as in wall clading, steel gates and similar work, cut to size holes, punched, inclduing round headed screws, clout nails or riverts and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, etc including bending or turning up, mitred angles etc complete all as specified and as directed.

M&L for treating small articles such as hold fasts, gully grating, ends of posts etc area n.exc 0.1 sqm each and treated with tar or coal tar complete all as specified and as directed.

RMK INDUSTRIES

DHANA CONSTRUCTIONS