82580/E8 Improvement of Kitchen and Toilets in certain SMQs at AFS Suryalanka

Amount

Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc. all as specified and directed.

Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling surface finished even and smooth with out using extra cement all as specified and directed.

M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and aprons removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed

M&L for Non Skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed in cement mortar 1:6 all as specified and directed.

M&L for 100 mm high skirting with joint free non Skid ceramic coloured tiles (matt finish) 7 to 8 mm thick high area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 10 mm thick backing coat in cement mortar 1:4 all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed in cement mortar 1:6 all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick screed in cement mortar in cement mortar 1:4 all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame) not exceeding 1.5 sqm each including making good disturbed portions with PCC 1:2:4 type B-0 or in cement mortar 1:4 after removal of frames all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame) exceeding 1.5 sqm but not exceeding 4 Sqm each including making good disturbed portions with PCC 1:2:4 type B-0 or in cement mortar 1:4 after removal of frames all as specified and directed.

S&F Pressed steel frames 105 x 60mm size for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling of hollow portions of door frames etc., all as specified and directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats all as specified and directed.

S & F of Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads all as specified and directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F 100 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F 100 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F 75 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 all as specified and directed.

S&F 300 mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F Factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and dawings.

S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing.

S&F in repair vitreous china squatting pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, fixing with existing waste pipe and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed

S&F in repairs of 10 lit capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repairs, all as specified and directed by Engineer-in-Charge.

S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed by Engineer-in-Charge.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, 32 mm dia chromium plated waste fitting and 40 mm bore PVC waste pipe all as specified and directed by Engineer-in-Charge.

S&F in repairs of CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, all as specified and directed.

S&F in repairs 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified and directed.

S&F in repairs of fancy type chromium plated angle cock /stop valve15 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, all as specified and directed.

S&F in repairs 15 mm bore Bib taps, chromium plated, cast copper alloy, screwed down, screwed for iron pipe, all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F in repairs of Towel rail 600 mm long of PTMT minimum weight 190 gms, fixed with and including chromium plated brass screws and wooden / plastic cleats.

S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified, including taking up or down steel tubing and connections all as specified and directed.

S&F 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified, including taking up or down steel tubing and connections all as specified and directed.

M&L for Preparing new or previously un treated surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.

M&L for Preparing old treated surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm in width or girth applying one coats of synthetic enamel paint to match existing surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of white wash all as specified and directed.

M&L for Supplying pre-fabricated / factory made kitchen units below existing kitchen platform/counter (approximately 750 mm in height and 700 mm in depth) as per the following specifications:-

(a) The frame work of the cabinets shall be made out of 18/19 mm thick Marine plywood ( Century plywood, Kit Gold, Green ply, Western India Plywood, AEON or using any approved equivalent make). (b) Shutters shall be made out of 18/19 mm thick Marine plywood (Century plywood, Kit Gold, Green ply, Western India Plywood, AEON or approved equivalent make). Each shutter shall be fixed to the framework using two numbers of best quality EURO type Slip/Auto Hinges (Ebco, Hettich, Hafele or approved equivalent make) and provided with one approved quality and profile brush finished Stainless Steel (SS) handle of grade 304 (minimum 150 mm long) (c) The unit shall be firmly fixed to the walls/slabs/floor using non-corrosive metal screws of appropriate size and rawl plugs. (d) All exposed surfaces and internal surfaces of the units shall have machine pressed lamination having thickness 1mm and 0.8mm respectively of approved shade and make (Merino, Greenlam or approved equivalent) and pasted with synthetic resin based adhesive (Fevicol, Vamicol or approved equivalent) etc. (e) The thickness of four edge PVC lipping for shutters and drawer fascia shall be 2mm thick, thickness of edge lipping of carcass/ plywood partition should be 0.8mm and The lippings/banding shall match with the external laminate shade. (f) All faces and edges of Kadappah support slabs below the kitchen slab, wooden planks for supporting telescopic channel rails and wooden fillers shall be painted with a coat of synthetic enamel primer and two coats of white colour synthetic enamel paint. (g) Payment shall be made on the basis of front elevation area of modular units only. It is clarified that sides, top and bottom surfaces will not be measured for payment. (h) The wooden frame for shutter shall be made of minimum 70 mm wide marine plywood with lamination, wherever required.

Supplying of pre-fabricated / factory made Over head kitchen cabinet units (box type) of 500 mm in high and 300 mm in depth as per the following specifications:- (a) The unit shall made of 18/19mm thick marine plywood with both side lamination of 1mm thick of approved shade (Century plywood, Kit Gold, Green ply, Western India Plywood, AEON or approved equivalent make). (b) It shall provided with an approved quality and profile brush finished SS handle (minimum 150 mm long) of 304 grade and hinges. The shutters shall have fitted in 16 mm thick marine plywood frame alround with necessary cleats, clips and magnetic catchers. There shall be one shelf of 18 /19 mm thick edge polished board for horizontal partition in each cabinet. (c) The over head cabinet carcass shall be fitted to the wall with PVC capped 2mm thick concealed MS hanging brackets each having width of 15mm and depth of 50mm @ 2 brackets for each cabinet which is fixed on wall with necessary screws. (d) All necessary hardware's, wooden members for filling the gaps etc shall be included in the quoted rate.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

S&F in repair concealed stop cock with long shank and sheet flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions all as specified and directed.

M&L for 18 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drilling machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed r and including 15 mm thick screed in CM (1:6) complete all as specified and directed

M&L in repairs for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement , fixed in repairs all as specified.

S&F Stainless steel plate rack 1 mm thick of size 760x930x200 mm of standard makes all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes all as specified.

S&F in repairs 110 mm bore PVC (SWR) bends any radius provided with access door, fixed in repairs all as specified.

S&F in repairs 110 mm bore PVC (SWR) junction, single (Single T) equal or unequal provided with access door, fixed in repairs all as specified.

S&F in repairs 110 mm bore PVC (SWR) Vent cowl fixed in repairs all as specified.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes all as specified.

S&F in repairs 75 mm bore PVC (SWR) bends any radius provided with access door, fixed in repairs all as specified.

M&L for Preparing surface of sunken slab of kitchen and bath floortrap area and applying a two-component acrylic polymer-modified elastomeric waterproofing membrane complete all as specified and directed. Make:- Brushbond of fosroc or equivalent product of any approved manufacturers Procedure to follow :- (a) Dismantling of tiles and removal of old floor trap and replacing with new floor trap/nahani trap (b) Application of acrylic polymer in and around the floor area and finishing the surface by fixing tiles matching to existing shade Note:- New floor trap shall be measured and paid separately under relevant item.

M&L for RCC 1:2:4 type B1 (20 mm graded stone aggregate) as in kitchen platform, shelves & chajjas etc including necessary form work complete all as specified and directed.

S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for rounding to the edges of stone slabs one edge as in steps, cooking platform, and other similar situations all as specified and directed.

S&F in repairs 40mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed complete ll as specified

Demolition of existing PCC /lean concrete from sunken portion of WC/Bath including floor tiles and removing rubbish off the premises.

M&L for filling sunken portion of WC/Bath with lean concrete PCC 1:5:10 using 40 mm graded stone aggregate and finishing the surfaces rough to receive sub base complete.

M&L for 25 mm thick plain cement concrete sub base 1:2:4 type B0, (12.5mm graded stone aggregate) with water proofing compound compound @3% by weight of cement for laying floor tiles complete. Note :- WPC will be measured and paid separately.

M&L for 15 mm thick plaster for sunken portion in CM 1:3 mixed with water proofing compound @ 2% by weight of cement, finished even and smooth without using extra cement . Note:- WPC will be measured and paid separately.

Supply only integral water proofing compound

M&L for providing & laying APP based polymeric membrane of weight of 3 kg/sqm with non woven polyester fibre as reinforcement over a coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm by torch application with side over laps & longitudinal joints over laps etc as per manufacturer instructions complete. Note for item No. 66 to 70:- The item no. 66 to 70 are for sunken treatment of WC/Bath. The quoted rate for these items shall be inclusive of necessary water tightness test by filling water for continuous 48 hours. Any defects / leakage noticed during test shall be rectified by contracor at no cost to the Govt.

M&L for Point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl with multi stranded copper conductor drawn through and including suitable size Non metallic rigid PVC conduit and all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated branded Modular Metal concealed in walls with suitable Modular plate with outer cover with suitable screws for housing switches socket outlets fan regulators etc. all as specified and as directed for One light point controlled by one switch.

All as above per item no.71 hereinbefore but for One fan/exhaust fan point controlled by one switch on independent board.

All as above per item no. 71 hereinbefore but for one switch and socket outlet point 5 Amps on independent board.

S&F Modular Switch 5/6 Amps, 1module 1 Way complete all as specified and as directed.

S&F Modular Switch 15/16 Amps, 1 Module 1 Way complete all as specified and as directed.

S&F Modular Socket 5/6 Amps, 2 Module 2 and 3 pin complete all as specified and as directed.

S&F Modular Socket 15/16 Amps, 2 Module 2/3 pin complete all as specified and as directed.

S&F 3 Module Cover Plate with frame and Metal Flush Box complete all as specified and as directed.

S&F Ceiling rose, 3 plate /PVC/ polycarbonate, isolated body complete all as specified and as directed

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed. (Note: The cost of cuttingon wall if any required shall be included in the rate quoted)

S&F MCB Single Pole 6-32 Amps, 10 kA, C Curve complete all as specified and as directed.

M&L for submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade (FRLS) drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 4 Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed. Note:- Two runs of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length.

K VENUGOPALA SWAMY (BID ID -3348885)

BEEGEE DESIGN SYSTEMS (BID ID -3342602)

BEST ENGINEERING (BID ID -3346608)

DHANA CONSTRUCTIONS (BID ID -3343861)

SURA INFRASTRUCTURE (BID ID -3344673)

M/S SIRI BUILDERS (BID ID -3353519)

VACON INFRASTRUCTURES (BID ID -3343853)