REPAIR AND MAINTENANCE OF SUMMER APPLIANCES LIKE CEILING FAN, WALL FAN, PEDESTAL FAN AND EXHAUST FANS AND CERTAIN OTHER MISC E/M ITEMS AT AF STN BHUJ

Amount

Material & labour for Servicing of 1200/1400MM Ceiling Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of unserviceable part like bearing ,gun metal bush, capacitor,Rubber reel of suitable capacity and re-assembling the same and complete all as specified and as directed by Engineer-in-Charge.

Material & labour for taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish etc.and transportation to site after testing at workshop,connecting and testing on full load ,hanging/fixing the repaired fans in same position or at position complete all as specified and as directed by Engineer-in-Charge. as directed for the following fans:- (a) Rewinding of motor of ceiling fans 1200/1400 mm sweep complete all as specified and directed By Engr-in -Charge.

All as per item No 02 here-in-before but rewinding of motor of exhaust fans of 300/450 mm Sweep

All as per item No.02 here-in-before but rewinding of motor of Wall Mounted Fans of /450/600 mm Sweep

All as per item No.02 here-in-before but rewinding of flame proof exhaust Fans of 300 mm Sweep

Supply & fix in replacement ball bearing suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan of Make:- SKF/TATA/NBC complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement Gun Metal bushes suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement Rotor shaft suitable for ceiling fan complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement capacitor 2.5 mfd 250 volts AC Make USHA, Crompton, Bajaj, Concap complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement capacitor 4 mfd 250 volts AC Make USHA, Crompton, Bajaj, Concap complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement only rubber reel, bolt & nut, including cotter pin etc, complete all as specified and directed By Engr-in -Charge.

Supply & fix in replacement Flexible wire 23/.0076 twin core copper conductor complete all as specified and as directed by Engineer-in-Charge

Material & labour for fabrication of fan hook made out of MS strip 32x6mm duly welded with 12mm dia MS rod and fan Hook bend to shape 'S' after taking out old one complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement in repair ceiling fan down rod of length 300/450 mm, inner diameter 15mm and thickness not less than 1.5mm with clamps Nuts, Bolts and washers for existing ceiling fan complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement in repair ceiling fan down rod of length 600 mm, inner diameter 15mm and thickness not less than 1.5mm with clamps Nuts, Bolts and washers for existing ceiling fan as approved by Engr-in-Charge etc complete all as specified and as directed by Engineer-in-Charge

Supply & fix alluminium fan blades white colour suitable for 1200mm sweep ceiling fan with suitable nuts and bolts complete all as specified and as directed by Engineer-in-Charge

Material & labour for complete painting of ceiling fan of any make and sweep with two coats synthetic enameled paint(spray paining) of existing colour or ordered colour on one coat of red oxide primer after scratching and making/prepration of clean and smooth surfaces by applying putty complete all as specified and as directed by Engineer-in-Charge

All as per item No 17 here-in-before but painting of exhaust fans of 300/450 mm Sweep

Supply & fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 250 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Make:- Bajaj/Havells/CG/Usha. ( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

All as per item No 19 here-in-before but PVC exhaust fan of size 300 mm Sweep

All as per item No 19 here-in-before but metal exhaust fan of size 230/250 mm Sweep

All as per item No 19 here-in-before but metal exhaust fan of size 300 mm Sweep

All as per item No 19 here-in-before but heavy duty exhaust fan of size 380 mm Sweep

All as per item No 19 here-in-before but heavy duty exhaust fan of size 450 mm Sweep

Supply & fix in replacement of flame proof metal body exhaust fan AC single phase 230/240V of size 375 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Make:- Shyam/Sudhir. ( Note: Old unserviceable flame proof Exhaust Fan will be deposited in MES AGE E/M store yard).

Supply & fix in replacement energy saving ceilling fan 1200mm sweep and connecting up including provision of cable from ceilling rose or connector to fan and complete all as specified and as directed by Engineer-in-Charge .Make :Usha or equivalent Bajaj/ Cromton Greaves/Havells/ Crompton (Note:- Old unserviceable Ceiling fan deposit in AGE E/M store yard)

Supply & fix Bollard luminaire die cast housing and clear acrylic of IP 65 protection Inverted Tripod type , resistance to corrsion of 10 Watt with LED lamp with all fixing arrangements fixed with soft 360 deg light distribution complete including taking down old unserviceble fitting of any type complete all as specified and as directed by Engineer-in-Charge.Make:Havells Cat part No. MINIMOUNTBL10WLED830PSYMTOPMMAS Equivalent in Philips/Shakti/Crompton.

Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source all as per Havells or equivalent in Orient/Philips/Bajaj/CG/Halonix including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement inverter type LED street light 60 Watt, PDC housing, IP-66 inbuilt battery backup auto On/Off/ Dimm incl connecting with min 2.5 mtr 1.5 Sqmm multistranded copper wire complete all as specified and as directed by Engineer-in-Charge, Make- Halonix or equivalent in Bajaj/ Philips

Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells or equivalent in Orient/Philips/Bajaj/CG/Surya/Halonix complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18/20 W 4 ft indoor decorative with 2 Core copper wire freom ceiling rose to light fitting as per Make Havells or equivalent in Orient/Philips/Bajaj/CG/Halonix/Polycab complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement LED retrofit 4 ft 18/20 Watt T8 Tube light including disconnecting existing copper/ electronic ballast and connected items like starter, flexible wire etc complete in the existing flourescent T/L fittings of 36/40 Watt and 1x36/40W , 2x36/40 W all as directed by Eng In Charge. Make: Havells or equivalent in Orient/Halonix/Bajaj/CG/Surya/Polycab complete all as specified and as directed by Engineer-in-Charge

Labour only for attending emergent complaints i.e no light ,earth leakage,short circuit,neutral break,mains/submain/internal circuit of existing system of main building/block,making continious electric supply including carrying out minor repairs etc as required to make the system in order/functional including replacing fuse wire,copper cable,copper thimbles,glands,earthing wire complete all as specified and as directed by Engineer-in-Charge Note:- 1.Rate of Fuse wire,copper cable of size 1.5,2.5,4 Sqmm upto 3 RM,copper thimbles,glands,earthing wire are deemed to be considered in this item. 2.Minimum One electrician to be present daily during the contract period,if found absent Rs-600 per day will be deducted daily.

Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and as directed by Engineer-in-Charge

Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and as directed by Engineer-in-Charge.

Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with wooden board (1st class teak wood) with laminated sheet top cover, 3mm thick complete all as specified and as directed by Engineer-in-Charge for :-

(a) One light point controlled by one, one way switch single pole piano type

(b) One Fan point controlled by one, one way switch single pole piano type

(c) One 3 pin 5 Amp socket outlet on the same board .

(d) One 3 pin 5 Amps socket out let on independent board

(e) One bell point controlled by one bell push on independent board.

All as per item No.36 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

Supply & fix modular white cover plate with frame of module 2 flush ISI marked Havells or equivalent make of Anchor complete all as specified and as directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 3 flush ISI marked Havells or equivalent make of Anchor complete all as specified and as directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 6 flush ISI marked Havells or equivalent make of Anchor complete all as specified and as directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame 8 module ISI marked make - Havells or equivalent make of Anchor complete all as specified and as directed by Engineer-in-Charge.

Supply & fix modular blank plate module 1 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and as directed by Engineer-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

All as per item No 43 but with 4 sqmm copper conductor in existing conduit

Supply & fix in replacement, switch piano type, 5 Amp. SP, one way complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement switch socket combination, 2 in 1, 5 Amp, flush type complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement switch socket combination 2 in 1, 5/16A 5 in 1 Amp flush type universal complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement switch bell push, flush type, 5 Amp complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement modular swicth, 16 Amp flush type 1 module complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement modular bell push, flush type, 6 Amp,1 module complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement bell, AC, 230 V, SP, ding dong type complete all as specified and as directed by Engineer-in-Charge

Supply & fix in replacement switch piano flush type 230/250 Volt, 5 Amps single pole two way, complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement stepped type electronic fan Regulator flush type on the existing phenolic laminated etc as reqd single pole 240 volts grade 350 watts heavy duty ISI marked complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of ceiling fan regulator 120 Watt 2 module Modular Type electronic step type 5 step 360 deg Havells or equivalent make of Anchor,Polycab/ Havells complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and as directed by Engineer-in-Charge (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

All as per item No. 60 above but SPN 8 way with 200 Amp rated Busbar complete all as specified and as directed by Engineer-in-Charge. (Make : Havell's/ L&T/ Standard/ CG/Indoasian/Polycab)

All as per item No 60 above but SPN, 4 way complete all as specified and as directed by Engineer-in-Charge. (Make : Havell's/ L&T/ Standard/ CG/Indoasian/Polycab)

Supply & fix in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities complete all as specified and as directed by Engineer-in-Charge (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB TPN 415 volts 100 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion provn of GI protection pipe light grade of 32mm bore upto 7.5m length and connected earth wire to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in Replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed by Engineer-in-Charge. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

Supply and fixing Tamper proof Single phase AC KWH meter 10-60 Amps with following features including sealing and sealing wire, Class – 1 accuracy as per IS 13779, 240V, 50HZ LCD display, Forward energy recording irrespective of current direction, LED indication for earth leakage, elegant polycarbonate enclosure High surge with stand up to 8 KV Anti temper feature. Measures & Displays kWh complete all as specified and as directed by Engineer-in-Charge. Make: L & T / SECURE / CRADIT / HPL . ( Note: Old unserviceable elect meter will be deposited in MES store yard). (Note:- Minimum 02 Electricians required from 0900 hrs to 1700 hrs continuously for attending day to day complaints in contract period (Except in Gazetted / Weekly holidays.

Jyoti Refrigeration

Mohshin Refrigeration & Electrical Services

Hi-Tech Systems

M/s Bombay Novelty Stores

Gayatri Construction Co