SDSTPS

Applying anti termite treatment to the existing buildings in the areas of wooden frames, doors, cubboards, wall cracks etc., wherever required with suitable pesticide like chlorophyriphos 20 EC (shall confirm to IS 8944:2005 RA 2015)/ Imidacloprid 30.5 SC (shall confirm to IS 16131:2015) or equivalent (as registered by central insecticides board-registration committee CIB) to control the pests spreading further, rate includes cost of all materials, all labour charges including making holes, filling with chemical and closing the holes, all leads & lifts, T&P etc., complete for finished item of work as directed by the Engineer-In-Charge. ATT to existing structures shall be as per IS 6313 (part 3) 2013 RA 2018.

Removing of damaged tiles and disposal of debris with minimum lead of 50m away from site and laying with new tiling with Edge cut rectified ceramic glossy finish floor tiles /Anti skid tiles/Daddoing Tiles of size 450X450 mm for flooring, 300 mmx 300mm for toilets flooring and 8 mm thick of approved make & quality of all shades set over base coat of cement mortar (1:5), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials but excluding cost of cement (Cement will be supplied by department), all labour charges, T&P etc., complete for finished item of work as directed by Engineer-in-charge. Ceramic floor tiles shall confirm minimum to IS 15622-2017 class GroupBIIa, glazed, Skid-resistant and rectified. Ceramic wall tiles shall confirm minimum to IS 15622-2017 class Group BIII Glazed, polished and rectified. Laying/ fixing of tiles work shall be as per APSS 707.

Filling of gaps between tiles to avoid leakages from Hall/Kithen/bedroom/bath/wash rooms of residential quarters by removing the existing damaged/washed out white cement and making groove with groove cutting machine and re-filling the same with a mix of Grouting powder and Grout Admix Plus chemical, the rate includes all labour charges, hire charges of groove cutting machine, cost of Chemical, cleaning charges of floor etc., complete for finished item of work as directed by the department. The joint grouting work shall be as per the recommendations of the grout manufacturer and as per ISO 13007 (Part 3): 2004, Type CG, Class 1 W.

Supply, fabrication and erection of hand railings in balconys, staircases, terrace parapet walls etc ., where ever damaged and required to replace with GI round/ square pipes (hollow bars), GI pipe medium grade as per IS 1161: 2014 & IS4736:1986 Steel tubes, YSt 210 Grade, Galvanised’, as GI pipes are intended to withstand internal water pressure and Steel tubes are intended for structural support and Welding shall conform to IS 816: 1969, Repair/restoration to Galvanising after welding shall conform to IS 11759: 1988 the rate includes cost and conveyance of all materials like GI pipes of required sizes, all labour charges for fabrication, erection charges at all heights and painting with two coats of epoxy Paint conforming to IS 14209 :2016’ for Epoxy paint over a single coat of epoxy Primer conforming to IS 13238: 2021’ for Epoxy primeretc., complete for finished item of work as directed by the Engineer-In-Charge. Painting work shall be as per APSS 1207 and APSS 1212.

Providing 12 mm thick plastering to walls with CM (1:5) including cost and conveyance of all materials but excluding cost of cement (Cement will be supplied by department), Labour Charges, Curing at all leads and lifts etc., complete for finished item of work and as directed by the Engineer-in-Charge. Plastering work with CM single coat shall be as per APSS 903.

Painting to old Iron works like Gates, Grills, Hand Rails, door frames etc., with epoxy paint ‘conforming to IS 16943: 2019’ for Epoxy paint of approved quality in one coat over one coat of epoxy primer conforming to IS 13238: 2021’ for Epoxy primer , the rate includes cost and conveyance of all materials, brushes, all labour charges, all leads & lifts, etc., complete for finished item of work and as directed by the Engineer in charge. Painting on iron works with synthetic enamel paint shall be as per APSS 1212. Maintenance painting shall be as per Clause 7 of IS 1477(Part 2):1971’

Painting to the ceilings/walls with one coat of primer using cement paint ‘IS 109: 2017’ for cement primerof approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, the rate includes cost & conveyance of all materials to work site, all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Painting walls with cement primer shall be as per APSS 912.

Painting to the internal walls with one coat of plastic emulsion paint conform to IS 15489: 2013, Type 1, Glossy finish of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost & conveyance of all materials to work site, all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Plastic emulsion painting work shall be as per APSS 1216.

Painting to the internal walls with one coat of damp proof paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost & conveyance of all materials to work site, all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Plastic emulsion painting work shall be as per APSS 1216. ASTM C836-18, for elastomeric cold applied water proofing liquid andASTM C898-09, for application method.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebate of 32MM. Door Frame section of 45x90 MM. The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/ assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no's for horizontal member. WPC material shall be as per ISO 20819-1: 2020 Type R40, Ex2 ’

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MMtop and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame. WPC material shall be as per ISO 20819-1: 2020 Type R40, Ex2 ’

Supplying and fixing 23" size (584.2 mm) indian pattern of approved quality water closet with with "P" trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mm with 10 Liters capacity single flush PVC low level Flushing tank Parry/Slimline with all internal components & short bend including cost and conveyance of all materials, all labour charges etc., complete for finished item of work. ‘IS 2556 Part-15 :2024’

Supplying and Fixing of European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap with best indian make plastic seat and lid with plastic or rubber buffers and fixing of 10 Liters capacity single flush PVC low level Flushing tank Parry ware Slimline with all internal components & short bend including cost and conveyance of all materials, all labour charges etc., complete for finished item of work.

Supplying & Fixing of 550 x 400 mm Indian make of approved Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block with Single C.P. Pillar cock including cost and conveyance of all materials, all labour charges etc., complete for finished item of work.

Supply and fixing of stainless steel sink single bowl of size 24" x 18" x 8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with accessories Indian make on cantilever brackets including cost of waste coupling, PVC waste pipe , labour charges for fixing complete for finished item of work in all floors as directed by Engineer in charge. ‘IS 13983 :1994

Laying PCC (1:3:6) wherever required by hand mixing, the rate includes cost and conveyance of all materials excluding cost of cement (Cement will be supplied by department), labour charges and clearing away the debris etc., complete for finished item of work as directed by the Engineer-in-charge. PCC 1:3:6 work shall be as per APSS 402.

Removal and refixing of SS bib cock of 12.7mm dia of indian make heavy duty long body of Seiko or equivalent make Continental series wherever necessay etc., complete for finished item of work as directed by the Engineer-In -Charge. IS 8931: 2021

Removal and refixing of wall mixer of 12.7mm dia of indian make heavy duty long body of Seiko or equivalent make Continental series wherever necessay etc., complete for finished item of work as directed by the Engineer-In -Charge.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm The rate includes cost and conveyance of all materials lead and lift,labour charges etc., complete for finished item of work as directed by Engineer -in -charge

Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.6 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x57mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

Replacement of the existing damaged cup board frame/shutter and fixing with new cupboard shutter of MDF board make greenply/newwood or equivalant, the rate includes cost and conveyance of all materials, labour charges, all necessary fixtures, removing charges, all leads and lifts etc., complete for finished item of work and as directed by the Engineer-in-charge. (Measurement will be area of MDF Board). Pre-laminated medium density particle board shall confirm to IS 14587: 1998; Grade 1,Type1/ 2/ 3/ 4; both side laminated, Formaldehyde class E1. Note.: Colour and finish (glossy, matt, textured) will be specified based on requirement).

Painting to old wood works like window frames,door frames, door shuters etc., with synthetic enamel paint of approved quality in Two coat's , the rate includes cost and conveyance of all materials, brushes, all labour charges, all leads & lifts, etc., complete for finished item of work and as directed by the Engineer in charge. Painting on iron works with synthetic enamel paint shall be as per APSS 1212.

Earthwork excavation in loamy, clayey and sandy soils including removal of stumps and other deleterious material and disposal upto a lead of 50 m, for water supply and sanitary lines and where ever necessary and backfilling the trenches with excavated material etc., complete for finished item of work as directed by the Engineer-in-charge. Trench work excavation and backfilling shall be as per APSS 1317.

Laying PCC (1:3:6) after providing pipes, traps etc., the rate includes cost and conveyance of all materials, labour charges and clearing away the debris etc., complete for finished item of work as directed by the Engineer-in-charge. PCC 1:3:6 work shall be as per APSS 402.

Brick Masonry in CM(1:6) by using well cured FLY ASH SOLID BRICKS of size 225 mmx 100 mm x60 mm(or) 230*110*70mm with 50kg/cm2 compressive strength, the rate includes cost and conveyance of all materials, labour charges, curing and all leads & lifts etc., complete for finished item of work as directed by the Engineer in Charge. Flyash bricks shall confirm to IS 12894:2002 RA 2017, Brick masonry work with CM 1:6 shall be as per APSS 504.

Providing 12 mm thick plastering to walls with CM(1:6) including cost and conveyance of all materials, Labour Charges, Curing at all leads and lifts etc., complete for finished item of work and as directed by the Engineer-in-Charge. Plastering work with CM single coat shall be as per APSS 903.

Tiling with Edge cut rectified ceramic glossy finish floor tiles /Anti skid tiles/Daddoing Tiles of size 450X450 mm for flooring, 300 mmx 300mm for toilets flooring and 8 mm thick of approved make & quality of all shades set over base coat of cement mortar (1:5), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, all labour charges, T&P etc., complete for finished item of work as directed by Engineer-in-charge. Ceramic floor tiles shall confirm minimum to IS 15622-2017 class GroupBIIa, glazed, Skid-resistant and rectified. Ceramic wall tiles shall confirm minimum to IS 15622-2017 class Group BIII Glazed, polished and rectified. Laying/ fixing of tiles work shall be as per APSS 707.

Filling of gaps between tiles to avoid leakages from bath/wash rooms of residential quarters by removing the existing damaged/washed out white cement and making groove with groove cutting machine and re-filling the same with a mix of Grouting powder and Grout Admix Plus chemical, the rate includes all labour charges, hire charges of groove cutting machine, cost of Chemical but excluding cost of Grouting powder which will be supplied by the department at free of cost, cleaning charges of floor etc., complete for finished item of work as directed by the department. The joint grouting work shall be as per the recommendations of the grout manufacturer.

Removing and Refixing of Indian pattern water closet with "P" trap 630 mm x 450 mm by dismantling the existing damaged Water Closet and refixing with new one, the rate includes cost of dismantling charges and fixing charges, all labour charges with all leads and lifts but excluding the cost of Water closet etc., complete for finished item of work as directed by the Engineer-in-charge. Installation/fixing of water closet shall be as per APSS 1326.3.4.

Supplying, removing and refixing of European type water closet with "S" trap along with Plastic seat & lid by dismantling the existing damaged Water Closet and refixing with new one, the rate includes dismantling charges and fixing charges, all materials cost, labour charges with all leads and lifts etc., complete for finished item of work as directed by the Engineer-in-charge. Pedestal type water closet (European shall be as per IS 2556 (Part2):2004, installation/fixing work shall be as per APSS 1326:3.4.

Supplying and fixing of Flush tanks for European water closets by dismantling the existing damaged flush tank and refixing with new one, the rate includes all materials, dismantling charges and fixing charges, all labour charges with all leads and lifts etc., complete for finished item of work as directed by the Engineer-in-charge. Plastic water flushing cistern shall confirm to IS 7231:1994 RA 2019, type-low level, capacity-10 Lts. Fixing shall be as per the recommendations of the manufacturer.

Supply, cutting, bending and fabrication of reinforcement with HYSD/TMT bars including cutting, bending, placing in position and tying/welding wherever necessary for RCC works, the rate includes cost and conveyance of reinforcement steel, binding wire and all other materials, all labour charges, all leads and lifts etc., complete for finished item of work as directed by Engineer-in-charge. Reinforcement work shall be as per APSS 403.3 and APSS 403.4.

Laying R.C.C in M20 grade Nominal Mix mix using 12mm to 20mm size well graded HBG metal and a minimum cement quantity of 400 Kg per Cum for Cover blocks and other RCC Works, the rate includes cost and conveyance of all materials, labour charges, shuttering, vibrating charges, machine mixing charges, curing, all leads & lifts etc., complete for finished item of work as directed by the Engineer-in-charge. M20 concrete shall confirm to APSS 402. RCC work shall be as per APSS 403.

Painting to walls with one coat of ready mixed oil bound washable distemper acrylic based of approved colour and shade (Oil bound washable distemper acrylic based will be issued by the department at free of Cost) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including conveyance of all materials to work site, all operational, incidental, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Distemper painting work shall be as per APSS 1216.

Painting to the External walls with one coat of plastic emulsion paint of approved brand and shade (External Plastic emulsion paint will be issued by the department at free of cost) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including conveyance of all materials to work site, all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Plastic emulsion painting work shall be as per APSS 1216.

Painting to the walls with one coat of primer using cement paint of approved brand and shade (Cement paint for Primer coat will be issued by the department at free of cost) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, the rate includes conveyance of all materials to work site, all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Painting walls with cement primer shall be as per APSS 1216.

Painting to old Iron works like Gates, Grills, Hand Rails, door frames etc., with synthetic enamel paint of approved quality (the necessary enamel paint and Primer wil be issued by the department at free of Cost) in two coats over one coat of primer, the rate includes cost and conveyance of all materials, brushes, all labour charges, all leads & lifts, etc., complete for finished item of work and as directed by the Engineer in charge. Painting on iron works with synthetic enamel paint shall be as per APSS 1212.

Clearing of Shrub and light jungle (more than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same in pinakini colony of SDSTPS Township and where ever necessary, the rate includes all labour charges, T&P etc., complete for finished item of work as directed by the Engineer-in-charge. Jungle clearance shall be as per APSS 201 and APSS 1405.

Attending repairs by welding of Petty Iron works for complaints accumulated like on full day basis with minimum 1Welder and 1helper, for damaged hinges of door frames/grills/railing pipes/main gates etc., the rate includes hire charges of welding machine, cost of electrodes, all incidental charges, all labour charges etc., complete for finished item of work as directed by the Engineer-in-charge.

Supply, fabrication and erection of Petty Iron works like Grills ,gates, Hand railings etc ., where ever necessary, the rate includes cost and conveyance of all materials like structural steel, all labour charges for fabrication, erection charges at all heights and painting with two coats of Synthetic Enamel Paint over a single coat of Primer etc., complete for finished item of work as directed by the Engineer-In-Charge. MS angles shall be as per IS 808:1989; MS square and round bars as per IS 1732:1989; welding shall be as per IS 816:1969; red oxide primer shall confirm to IS 2074:2015; synthetic enamel paint shall confirm to IS 2932:2013, Steel work shall be as per APSS 1608, Painting work shall be as per APSS 1207 and APSS 1212.

Jointing of the following HDPE pipes 6 Kg/ sqcm (PE-100 grade) confirming to IS 4984- 1995 by butt fusion welding as per IS :7634-P-II/1975 as amended from time to time to the alignment and gradient and testing the line to the required pressure,the rate includes hire charges of butt fusion welding machine, all labour charges, hire charges of T&P etc., complete for finished item of work as directed by the Engineer -in-charge. (HDPE pipes will be issued by dept. at free of cost) A) 315 mm Dia/200mm /160 mm dia HDPE PIPE

Jointing of the following HDPE pipes 6 Kg/ sqcm (PE-100 grade) confirming to IS 4984- 1995 by butt fusion welding as per IS :7634-P-II/1975 as amended from time to time to the alignment and gradient and testing the line to the required pressure,the rate includes hire charges of butt fusion welding machine, all labour charges, hire charges of T&P etc., complete for finished item of work as directed by the Engineer -in-charge. (HDPE pipes will be issued by dept. at free of cost) B) 75 mm Dia HDPE PIPE

Arresting of roof leakages/wall wettings using Pressure grouting by drilling holes above 18mm dia in RCC slabs and grouting with neat cement slurry or with approved epoxy bonding agent using pump where ever necessary, the rate includes cost and conveyance of all materials like cement/epoxy bonding agent, hire charges of grouting machine, labour charges at all heights etc., complete for finished item of work as directed by the Engineer-In-Charge.

Attending repairs to cracks on walls by making grooves in the crack portion by applying Contech – 2000 bio Product crack fill chemical with white cement over cracks, the rate includes cost & conveyance of all materials, labour charges, all leads & lifts, T&P etc., complete for finished item of work as directed by the Engineer-in-charge. Polymer sealing/ crack filling compound- Sealing compound shall meet the requirements of a polymer modified cementious product confirming to ASTM C 1483-13 type-II.

Hire charges of JCB for leveling the heaps, overburden earth on sides of roads, levelling the vacant areas etc., the rate includes cost of fuel, wages of driver, repair charges etc., complete for finished item of work as directed by Engineer-in-charge.

Applying anti termite treatment to the existing buildings in the areas of wooden frames, doors, cubboards, wall cracks etc., wherever required with suitable pesticide like chlorophyriphos 20 EC (shall confirm to IS 8944:2005 RA 2015)/ Imidacloprid 30.5 SC (shall confirm to IS 16131:2015) or equivalent (as registered by central insecticides board-registration committee CIB) to control the pests spreading further, rate includes cost of all materials, all labour charges including making holes, filling with chemical and closing the holes, all leads & lifts, T&P etc., complete for finished item of work as directed by the Engineer-In-Charge. ATT to existing structures shall be as per IS 6313 (part 3) 2013 RA 2018.

Maintaining 2000 LHP RO plant in Pinakini Colony by replacing the filters at regular intervals, applying antiscalent chemical, activated carbon, changing sand media, using low PH RO membrane cleaner whenever required, rate includes all materials cost, labour charges, conveyance charges etc., complete for finished item of work as directed by the Engineer-In-Charge. Consumables and chemicals shall be as recommended by the RO plant manufacturer and shall be of food grade. Treated water shall meet the requirements of IS 10500:2012 RA.

Supply and fixing of membranes required for 2000 LPH RO unit in pinakini Colony by replacing the old membranes for increasing the RO processing capacity, rate includes all materials cost, labour charges, conveyance charges etc., complete for finished item of work as directed by the EIC. Consumables shall be as recommended by the RO plant manufacturer and shall be of food grade. Treated water shall meet the requirements of IS 10500:2012 RA.

Collection and supply of local sand/ vagu sand for filling in low lying areas, lawn areas, plant bunds etc., including cost and conveyance of sand, labour for filling, all leads and lifts, T&P etc., complete for finished item of work as directed by the Engineer in charge. Sand for filling shall be as per APSS 310.1.