Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.4 LAccepted-AOC 164 HIRANI NAGAR OPP SIDDHI VINAYAK TEMPLE MADHAPAR KUTCH 370 020 | KACHCHH | GUJARAT | 370020 | ₹21.4 L Quoted ₹22.5 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹24.8 LRejected-Finance PLOT NO 44 SIDDARTH PARK BEHIND ICE FACTORY KODKI ROAD BHUJ PIN 370 001 | BHUJ | KACHCHH | GUJARAT | 370001 | ₹24.8 L | L2 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | Pelectricals L1 | M/S S. SINGH TRADERS L2 |
|---|---|---|---|---|---|
| 1.00 | Material & labour for Servicing of 1200/1400MM ceiling fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of unserviceable part like bearing ,gun metal bush, capacitor,Rubber reel of suitable capacity and re-assembling the same and complete all as specified and as directed by Engineer-in-Charge. | 280 | EACH | 225 ₹63,000 | 250 ₹70,000 |
| 2.00 | Material & labour for taking out & removing old burnt-out windings of flame proof metal body exhaust fan AC single phase 230/240V of size 375 mm sweep with louvers with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish etc.and transportation to site after testing at workshop,connecting and testing on full load ,hanging/fixing the repaired fans in same position or at position complete all as specified and as directed by Engineer-in-Charge. as directed for the following fans:-
(a) Rewinding of motor of flame proof exhaust fans 375 mm sweep complete all as specified and directed By Engr-in -Charge. | 19 | EACH | 1,000 ₹19,000 | 1,100 ₹20,900 |
| 3.00 | Material & labour for taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish etc.and transportation to site after testing at workshop,connecting and testing on full load ,hanging/fixing the repaired fans in same position or at position complete all as specified and as directed by Engineer-in-Charge. as directed for the following fans:-
(a) Rewinding of motor of ceiling fans 1200/1400 mm sweep complete all as specified and directed By Engr-in -Charge. | 800 | EACH | 500 ₹4 L | 550 ₹4.4 L |
| 4.00 | All as per item No 02 here-in-before but rewinding of motor of exhaust fans of 300/450 mm sweep complete all as specified and directed By Engr-in -Charge. | 25 | EACH | 700 ₹17,500 | 1,000 ₹25,000 |
| 5.00 | All as per item No.02 here-in-before but rewinding of motor of wall mounted fans of 450/600 mm sweep complete all as specified and directed By Engr-in -Charge. | 35 | EACH | 750 ₹26,250 | 750 ₹26,250 |
| 6.00 | All as per item No.02 here-in-before but rewinding of flame proof exhaust fans of 300 mm sweep complete all as specified and directed By Engr-in -Charge. | 25 | EACH | 700 ₹17,500 | 1,250 ₹31,250 |
| 7.00 | Supply & fix in replacement ball bearing suitable for ceiling fan/exhaust fan/wall mounted fan/pedestal fan complete all as specified and as directed by Engineer-in-Charge | 700 | EACH | 110 ₹77,000 | 100 ₹70,000 |
| 8.00 | Supply & fix in replacement gun metal bushes suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan etc complete all as specified and as directed by Engineer-in-Charge | 100 | EACH | 20 ₹2,000 | 50 ₹5,000 |
| 9.00 | Supply & fix in replacement rotor shaft suitable for ceiling fan complete all as specified and as directed by Engineer-in-Charge | 150 | EACH | 200 ₹30,000 | 100 ₹15,000 |
| 10.00 | Supply & fix in replacement capacitor 2.5 MFD 250 volts AC complete all as specified and as directed by Engineer-in-Charge | 800 | EACH | 50 ₹40,000 | 50 ₹40,000 |
Updated dates
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
18 Nov 2025, 6:00 pmClosed
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
REPAIR/REPLACEMENT SUMMER APPLIANCES LIKE CEILING FAN, WALL MOUNTED FANS, PEDESTAL FANS, EXHAUST FANS AND CERTAIN ALLIED WORKS IN DOMESTIC AND TECHNICAL AREA AT AF STN BHUJ
2025_MES_733857_2
8809/V/E8
Open Tender
Electrical and Maintenance Works
270 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹50,000
Yes
30 Dec 2025
31 Oct 2025
20 Nov 2025
31 Oct 2025
18 Nov 2025
6 Nov 2025
Amount
Material & labour for Servicing of 1200/1400MM ceiling fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of unserviceable part like bearing ,gun metal bush, capacitor,Rubber reel of suitable capacity and re-assembling the same and complete all as specified and as directed by Engineer-in-Charge.
Material & labour for taking out & removing old burnt-out windings of flame proof metal body exhaust fan AC single phase 230/240V of size 375 mm sweep with louvers with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish etc.and transportation to site after testing at workshop,connecting and testing on full load ,hanging/fixing the repaired fans in same position or at position complete all as specified and as directed by Engineer-in-Charge. as directed for the following fans:- (a) Rewinding of motor of flame proof exhaust fans 375 mm sweep complete all as specified and directed By Engr-in -Charge.
Material & labour for taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish etc.and transportation to site after testing at workshop,connecting and testing on full load ,hanging/fixing the repaired fans in same position or at position complete all as specified and as directed by Engineer-in-Charge. as directed for the following fans:- (a) Rewinding of motor of ceiling fans 1200/1400 mm sweep complete all as specified and directed By Engr-in -Charge.
All as per item No 02 here-in-before but rewinding of motor of exhaust fans of 300/450 mm sweep complete all as specified and directed By Engr-in -Charge.
All as per item No.02 here-in-before but rewinding of motor of wall mounted fans of 450/600 mm sweep complete all as specified and directed By Engr-in -Charge.
All as per item No.02 here-in-before but rewinding of flame proof exhaust fans of 300 mm sweep complete all as specified and directed By Engr-in -Charge.
Supply & fix in replacement ball bearing suitable for ceiling fan/exhaust fan/wall mounted fan/pedestal fan complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement gun metal bushes suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan etc complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement rotor shaft suitable for ceiling fan complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement capacitor 2.5 MFD 250 volts AC complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement capacitor 4 MFD 250 volts AC complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement only rubber reel, bolt & nut, including cotter pin etc, complete all as specified and directed By Engr-in -Charge.
Supply & fix in replacement flexible wire 23/.0076 twin core copper conductor complete all as specified and as directed by Engineer-in-Charge
Material & labour for fabrication of fan hook made out of MS strip 32x6mm duly welded with 12mm dia MS rod and fan hook bend to shape 'S' after taking out old one complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement in repair ceiling fan down rod of length 300/450 mm, inner diameter 15mm and thickness not less than 1.5mm with clamps nuts, bolts and washers for existing ceiling fan complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement in repair ceiling fan down rod of length 600 mm, inner diameter 15mm and thickness not less than 1.5mm with clamps nuts, bolts and washers for existing ceiling fan as approved by Engr-in-Charge etc complete all as specified and as directed by Engineer-in-Charge
Supply & fix alluminium fan blades white colour suitable for 1200mm sweep ceiling fan with suitable nuts and bolts complete all as specified and as directed by Engineer-in-Charge
Material & labour for complete painting of ceiling fan including blades by scrapping of old paint, filling of cavities formed, preparation/cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality writing MES/SM with appropriate size letter using black paint complete all as specified and as directed by Engineer-in-Charge.
All as per item No 18 here-in-before but painting of exhaust fans of 300/450 mm sweep complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ alteration to the existing hole to fix the exhaust fan complete all as specified and as directed by Engineer-in-Charge. (Note: Old unserviceable exhaust fan will be deposited in MES store yard).
All as per item No 20 here-in-before but PVC exhaust fan of size 250mm sweep complete all as specified and as directed by Engineer-in-Charge.
All as per item No 20 here-in-before but PVC exhaust fan of size 200mm sweep complete all as specified and as directed by Engineer-in-Charge.
All as per item No 20 here-in-before but PVC exhaust fan of size 150mm sweep complete all as specified and as directed by Engineer-in-Charge.
All as per item No 20 here-in-before but metal exhaust fan of size 300 mm sweep complete all as specified and as directed by Engineer-in-Charge.
All as per item No 20 here-in-before but metal exhaust fan of size 250 mm sweep complete all as specified and as directed by Engineer-in-Charge.
All as per item No 20 here-in-before but metal exhaust fan of size 380 mm sweep complete all as specified and as directed by Engineer-in-Charge.
All as per item No 20 here-in-before but heavy duty exhaust fan of size 450 mm sweep complete all as specified and as directed by Engineer-in-Charge.
Supply & fix wall mounted fan 450mm sweep, 240 volts osillation type sturdy & heavy duty aluminium blade for higher air delivery, nickel chrome plate guard, smooth oscillation complete fix in existing wall etc complete all as specified and as directed by Engineer-in-Charge. ( Note: Old unserviceable flame proof exhaust fan will be deposited in MES AGE E/M store yard).
Supply & fix in replacement energy saving ceilling fan,230 V, 1200mm sweep min air delivery 210 CFM with brushless direct current motor (BLDC) and connecting up including provision of cable from ceilling rose or connector to fan and complete all as specified and as directed by Engineer-in-Charge . (Note:- Old unserviceable Ceiling fan will be deposit in AGE E/M store yard)
Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 25 W light source including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 core copper wire from ceiling rose to light fitting etc complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18/20 W 4 ft indoor decorative with 2 core copper wire freom ceiling rose to light fitting etc complete all as specified and as directed by Engineer-in-Charge
Labour only for attending emergent complaints i.e no light ,earth leakage,short circuit, neutral break, mains/ sub main/internal circuit of existing system of main building /block, making continious electric supply including carrying out minor repairs etc as required to make the system in order/functional including replacing fuse wire,copper cable,copper thimbles, glands,earthing wire complete all as specified and as directed by Engineer-in-Charge Note:- 1.Rate of fuse wire,copper cable of size 1.5,2.5,4 Sqmm upto 3 RM,copper thimbles, glands, earthing wire are deemed to be considered in this item. 2.Minimum One electrician to be present daily during the contract period,if found absent Rs-600 per day will be deducted daily.
Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and as directed by Engineer-in-Charge
Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and as directed by Engineer-in-Charge.
Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with wooden board (1st class teak wood) with laminated sheet top cover, 3mm thick complete all as specified and as directed by Engineer-in-Charge for :-
One light point controlled by one, one way switch single pole piano type
One Fan point controlled by one, one way switch single pole piano type
One 3 pin 5 Amp socket outlet on the same board .
One 3 pin 5 Amps socket out let on independent board
One bell point controlled by one bell push on independent board.
All as per item No.36 here-in-before but with 2.5 Sqmm copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and as directed by Engineer-in-Charge
Supply & fix modular white cover plate with frame of module 1/2 flush ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fix modular white cover plate with frame of module 3 flush ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fix modular white cover plate with frame of module 6 flush ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fix modular white cover plate with frame of module 8 ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fix modular white cover plate with frame of module 12 ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fix modular blank plate module 1 complete all as specified and as directed by Engineer-in-Charge.
Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and as directed by Engineer-in-Charge. (Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)
Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4.0 Sqmm single core, copper conductor drawn through existing conduit and 4.0 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and as directed by Engineer-in-Charge. (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit)
All as per item No 45 but with 4.0 sqmm copper conductor in PVC casing caping complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement, switch piano type, 5 Amp. SP, one way complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement switch socket combination, 2 in 1, 5 Amp, flush type complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement switch socket combination 2 in 1, 5/16A 5 in 1 Amp flush type universal complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement switch bell push, flush type, 5 Amp complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement modular swicth, 16 Amp flush type 1 module complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement modular bell push, flush type, 6 Amp,1 module complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement bell, AC, 230 V, SP, ding dong type complete all as specified and as directed by Engineer-in-Charge
Supply & fix in replacement switch piano flush type 230/250 Volt, 5 Amps single pole two way, complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement PVC rectangular block for ounting,switches,sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 100mmx100m and 50mm deep, complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated etc as reqd single pole 240 volts grade 350 watts heavy duty ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement of ceiling fan regulator 120 Watt 2 module type electronic step type 5 step 360 deg complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement of ceiling rose 3 phase, PVC/Polycarbonate body complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and as directed by Engineer-in-Charge.
All as per item No. 63 above but SPN 8 way with 200 Amp rated busbar complete all as specified and as directed by Engineer-in-Charge.
All as per item No 63 above but SPN, 4 way complete all as specified and as directed by Engineer-in-Charge.
Supply & fix in replacement of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following polse and current capicity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge
MCB TPN 40 to 100 Amp
MCB SP 5 to 32 Amp
MCB SPN 32 Amp
Supply & fix in replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed by Engineer-in-Charge.
Note for above subject work:- Minimum 02 Electricians will be attended the office of AGE E/M GE (AF) Bhuj from 0900 hrs to 1700 hrs(Except Gazetted / Weekly holidays) for attending day to day complaints/work of subject work contract as directed by JE (E/M) .
M/S S. SINGH TRADERS (BID ID -3477406)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
0.50 MB
Tender Documents
Tender Documents • 0.74 MB
BOQ
BOQ • 0.46 MB
Download all tender documents and submit your bid