OWP Repairs to Public toilet unit at Veerabhadra Temple, Lepakshi, Anantapuramu district, A.P. (Re-tender 2nd call)

Items :

Dismantling/ Removal of the existing ceramic flooring tiles and wall dado tiles and other items at inside the existing toilet block including removal and disposal of the same wastage materials to the outside of the monument etc complete Item of the work as directed by the site in charge

Dismantling/ Removal of the dead cement plaster over the walls and ceiling and throwing away the wastage to a distance of 1.00kms etc., complete Item of the work as directed by the Site in charge

Dismantling/ Removal of existing sanitary fittings, wash basins, plumbing and throwing away the wastage to a distance of 1.00kms etc complete Item of the work as directed by the site in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge. The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding etc. complete Item of the work as directed by the site in charge.

Providing 15 mm plastering in C.M (1:4) for superstructure including cost, conveyance of all materials, labour charges, curing, seignorage, loading, unloading and stocking at site, etc complete Item of the work as directed by the site in charge

Providing dado work in the toilet and Tile work for skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) and other applicable charges if any etc. complete Item of the work as directed by the site in charge.

Providing Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in- charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work and other applicable charges if any etc. complete Item of the work as directed by the site incharge.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction including cost, conveyance of all materials, cutting in to required sizes, dressing charges, finishing etc., labour charges, fixing in position with hold fast lugs or with dash fasteners of required dia& length and other applicable charges if any etc. complete Item of the work as directed by the site incharge

Providing and fixing of 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter to new door frames made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanized M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of (For W.C. and bathroom door shutter)etc. complete Item of the work as directed by the site in charge.

Towards cost, supply of materials for Water supply and fixing in position items including conveyance of all materials etc. to the site etc complete work as directed by the site in charge (For Details refer to Annexure – A)

Towards cost, supply of materials for repair/ replacement of damaged electrification system in the toilet block including conveyance of all materials etc. complete Item of the work as directed by the site in charge. (For Details refer to Annexure – B)

Towards Cost, supply and fixing of Sanitary& Plumbing items including conveyance of all materials, labour charges, laying and fixing in position charges etc. complete Item of the work as directed by the site in charge(For Details refer to Annexure – C)

Providing synthetic enamel paint to the wall surfaces in 2 coats etc., including applyng putty to the crevices/cracks etc. wherever necessary, removal/cleaning of the existing surfaces using the iron brushes, cost and conveyance and supply of all materials and labour charges etc. complete Item of the work as directed by the site in charge

Earth work excavation in all types of soil up to 3.07 mtrs depth including initial lead and lift etch complete Item of the work as directed by the site in charge.

Providing and laying cement concrete excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) inclusive of all materials & about involved except scaffolding etc. complete Item of the work as directed by the site incharge.

Providing and construction of septic tank and soak pit by using brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming IS :2222 in super structure in C.M.1:6 including cost, conveyance of all materials, labour charges, curing, seignorage, loading, un loading and stocking at site etc complete Item of the work as directed by the site in charge.

Providing 15mm plastering in C.M.1:4for Septic tank and soak pit including cost, conveyance of all materials, labour charges, curing, seignorage, loading, un loadingandstockingatsiteetc.completeItemoftheworkasdirectedbythesiteincharge

Providing Steel reinforcement for RCC work including straightening, Cutting, bending, placing in position and binding all complete above plinth level. material, labor charges, Transportation, Loading and Unloading, etc complete Item of the work as directed by the site in charge. (12 mm bars of length 6.80m - 29 nos and 10 mm bars of length 2.50m - 25 nos)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, and reinforcement bars in 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm) including labour charges, mixing charges , watering charges, cost of material loading, unloading , lifting, laying, consolidating, segionarge charges etc. complete Item of the work as directed by the site in charge.

Hire charges for centering, shuttering, proping, staging material including erection/fixing at site complete Item of the work as directed by the site incharge.

Providing signage of 18mm thick black granite stone with engraving by sand blast colour filling with apex gold etc. of approved design of size 3’x2’ fixed on the existing grooved granite stone column of size 4”x6” with 3’length as shown in the drawing near the 2nd eastern gate way inside the monument area along the ramps / path ways to know the easy access to the visiting public including cost, conveyance of all materials, labour charges, cutting in to required size, grooving, lettering, labour charges, fixing charges etc. complete Item of the work as directed by the site incharge. (as per the enclosed drawing)

Providing CNB including cost, conveyance of all materials, labour charges, fixing in position as directed by the site in- charge etc. complete Item of the work as directed by the site incharge. (as per the enclosed drawing)

Providing DUST BINS of 1” thick granite stone slabs of size 2’x2’, for 4 sides walls including 10% Wastage, ½” thick granite stone slabs of size 2’x2’, for bottom walls including 10% wastage and 0x50x6mm ‘L’ angles for verticals to support the granite stone slabs 4 no x [email protected] [KG] including cost, conveyance of all materials, labour charges, fixing in position in 3 languages etc. complete Item of the work as directed by the site incharge. (as per the enclosed drawing)

Providing granite stone benches of size 0.45x0.15 for legs, 0.45x0.15 for seat and 0.45x0.10 for back rest including cost, conveyance of all materials, labour charges, quarrying, cutting in to required sizes, assembling, fixing in position etc. complete Item of the work as directed by the site in charge. (as per the enclosed drawing)

Earth work excavation in all types of soil including initial lead and lift and throwing away the debris at 500 mtrs far away etc. complete Item of the work as directed by the site incharge.

Providing Granite stone flooring with stones of size (0.90 to 1.20) x (0.45 to 0.60) x 0.10m over a bed Cement mortar 1:4:8 bed of average 10 cm thickness and filling the joint with cement mortar 1:4 from the main gate to the toilet block including cost, conveyance of all materials, labour charges, curing charges etc. complete Item of the work as directed by the site incharge.

Cost, supply and installation of industrial RO (250LPH) plant and blue star water cooler of 150 ltr capacity Including all taxes etc. complete as directed by site incharge. (For Details refer to Annexure – D)

Cost, supplying of 60x60x6mm square hallow pipes including cost, conveyance of all materials, fabrication, erecting and fixing in position, complete. as directed by the site in charge

Cost, supplying of 50x50x5mm square hallow pipes including cost, conveyance of all materials, fabrication, erecting and fixing in position, complete. as directed by the site in charge

Cost, supplying of powder coated GI sheets including cost, conveyance of all materials, and fixing in position, complete. as directed by the site in charge

Construction of base to the square pipe with stone masonry in C.M. 1:6 to a height of 0.30m etc. complete Item of the work as directed by the site incharge.

Construction of pedestal of size 2.50x2.50m with stone pillars of Size 9’’X9’’X24’’ for feet cleaning including necessary earth work excavation, providing 1½” PVC pipes of 183m length, fixing in position including digging, necessary plumbing fittings and 6nos of SS taps for water supply including cost and conveyance of all materials and labour charges as per enclosed reference photograph and as directed by site incharge.

Supply and fixing of location and direction sign boards of Size 4’x3’, made with 2 nos MS L Angles Vertical posts of size 65x65x6 mm; MS L Angles Frame of size 40x40x4mm, Board of 4mm ACP Sheet and letters cut and fixed in 2 layers of 3M retro high reflective radium sheet including fixing the vertical posts in PCC (1:2:4) blocks of size 0.45x0.45x0.60m and painting to the sign post and frame with two coats of synthetic enamel paint over a primary coat of red oxide including cost and conveyance of all materials and labour charges all complete as per the attached drawing and as directed by site inchrage

T NARASIMHULU NAIDU

M N NAIDU CONSTRUCTIONS