Construction, Testing Commissioning of Jeetpur Raikwal Harsinghpur Urf lachhampur Water Supply Scheme with Rising main, Distribution Main an Distribution Pipe Line, E and M work with boundary wall, FHTC, Miscellaneous and Other works etc at Haldwani

Rates for Construction, Testing & Commissioning of Jeetpur Raikwal-Harsinghpur Urf lachhampur Water Supply Scheme with Rising main, Distribution Main & Distribution Pipe Line, E&M work with boundary wall, FHTC, Miscellaneous & Other works etc. at Haldwani Block Dis

CIVIL WORK PIPE LINE WORK

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I pipes confirming to IS : 1239 (PART-1) including supply of all jointing materials like specials, white lead, hemp and oil etc in trenches with its cutting, threading and testing of pipe line etc complete. Medium Duty (Class 'B') : 15 mm (For FHTC)

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm dia nominal bore

100 mm dia nominal bore

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber for Air valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks (01 Nos.)

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

12 mm cement plaster of mix 1:4(1 cement : 4 fine sand)

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand)

560 mm diameter C.I, cover (heavy duty) the weight of the cover to be not less than 108 kg.

House Service Connection.

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials.

Supply of Special vizferul, Clamp, Union, Elbow, Nipple & Socket etc as required at site

S.I.T.C. PUMPING PLANTS & ACCESSORIES FOR TUBEWELL

Submersible pump set of 2000 LPM, 140 Mt. head suitable for 300mm dia Assembly operating at 3 phase 50 Hz AC supply. Supply installation testing and commissioning of three phase digital rolling contact servo voltage stablizer suitable for unbalance voltage and unbalance load including fixing of proper size copper lugs on input and out put cable both end at defferent sites on turnkey basis including five years cost free maintenance.

Input voltage 330-460 volts (phase to phase) capacity - 200 kva

Miscellaneous Works

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 164.70(Outerside)

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Welding Works for repairing of existing water supply line of different sizes.

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and earth work (Note :- This item shall be paid with the reusable.) 50 mm Pipe

Re-Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete.

Supply & Fixing of Sluice Valves of ISI Mark on existing Pipe lines 65 mm.

E & M WORK AND ACCESSORIES FOR TUBEWELL WORK

Supply, Installation, Testing & Commissioning on turnkey basis for fully automatic pump automation control pannel of suitable for 1500 lpm 175 m head capacity having intelegent unit having" FIELD PROGRAMMABLE LOGIC CONTROLER based SCADA operated pump motor startRun Control Protactagainst faults automatically operated controle and management system" for supervisory control and data acquasition system at pumping water supply schemes & two year freeof cost AMC for warranty period of following dutiesas per specifications sheet enclosed &suaitable for integrationsin the existing system including cartage from works of manufactures up to site of work Capacity of suitable for 1500 lpm 175 m.

Supply and fixing of 400 Amp TPN main switch 3 phase, 415 volt, 50 H havells make heavy duty double break main switch with HRC fuse making connection at this testing complete work etc at dewalatallatubewell.

Supply of 150mm dia MSERW Column pipe, 6.4 mm thick -

Supply of 100mm dia MSERW Column pipe, 6.4 mm thick -

Supply and fixing of suitable 16 mm thick MS Flange for column pipe 150 mm dia both end with fixing trangle support and cutting of groove for cable all complete with labour& T&P

Supply of 150mm dia size column pipe clamps specified as per direction of Engineer-in-charge.

Supply of 3 Core flat submersible cable KSB make Continuous Cable 3/35.0 sq.mm suitable for Submersible

INJECTING DOSER

Supply, Installation, Testing and Commissioning of Microprocessor based chemical dosing system suitable for providing automatically variable controlled dose of chemical to maintain required PPM of chemical with required accessories and 200 litres tank, wall mounting suitable for delivery up to 8 litters of chemical solution /sodium Hypo chloride solution per hours under maximum delivery pressure up to 10 kg/cm2 and Suction lift not less than 1.5 meter with accessories (i.e. Valve, Nozzle,200 litres PVC Tank etc complete)

Supply of Tool Kits specified as per direction of Engineer-in-charge.

Supply of Lifting tackle 10 tonne capacity Chain pulley. taparia make

BOUNDARY WALL AND GATE : Supply of all labour, materials, and T&P etc. and construct boundary wall at proposed water works site.

Boundary No. – 1 For 90 mtr. Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand)

Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand) Flush/ Ruled/ Struck or weathered pointing

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Fencing with angle iron post placed at required distance embedded incement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with 01/05/2012 - 1horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire.

Supplying at site Angle iron post & strut of required size including bottom kilogram 73.30 41121 to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. Size 50×50×6mm

Boundary No. – 2 For 60 mtr.

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand)

Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand) Flush/ Ruled/ Struck or weathered pointing

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Fencing with angle iron post placed at required distance embedded incement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with 01/05/2012 - 1horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire.

Supplying at site Angle iron post & strut of required size including bottom kilogram 73.30 41121 to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. Size 50×50×6mm

Supply of all labour, materials, and T&P etc and privide 3.6 m wide M.S. gate with pillars as per departmental type design, at proposed water works site. (02 Gate) 3.60 M WIDE MILD STEEL GATE WITH PILLARS: (2 Nos.)

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I, rain 100 mm diameter

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Reinforcement for R.C.C. Work Using Mild Steel and Medium /Tensile Steel Bars

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

12mm thick Plaster in mix 1:6 (1 cement : 6 fine sand)

Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand) Flush/ Ruled/ Struck or weathered pointing

Providing and Fixing of 40 mm dia G.I. conduit pipes including specials, cutting & threading etc. including supply of all materials, labour T&P etc. required for proper completion of the work.

Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as permanufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and sq.m 3,452.80 43722 diagonal braces of 40x40x6mm angle iron, 3mm M.S. Gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer.

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Provide and fixing glass panes of 28 cm × 10 cm. (2Nos.)

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Supplying and filling in plinth with Jamuna sand including watering, ramming, consolidating and drassing complete in proposed water works.

M/S VIDDUT KUMAR JAIN