Item Rate Contract for SITC of Energy Efficient Centrifugal Pumpsets at Pre Settling (O-Point) Pumping Station and Pre Settling (O-Point) Pumping Station and IPS IInd Kutha Pumping Station under New Tehri Pumping W/s Scheme, Distt. Tehri Garhwal

Rates for SITC of Energy Efficient Centrifugal Pumpsets at Pre Settling (O-Point) Pumping Station and Pre Settling (O-Point) Pumping Station and IPS IInd Kutha Pumping Station under New Tehri Pumping W/s Scheme, Distt. Tehri Garhwal.

Pre Settling (O-Point) Pumping Station

Providing and supply of Energy Efficient Centrifugal pump with discharge capacity 3600 LPM, Head 240 mtr., RPM 2900 with the following specifications:- Suction Casing materials – CI, Casing – WCB, Stage Casing – CI, Impeller – Bronze, Shaft & Sleeve – SS-410

Providing and supply of Energy Efficient Motor (IE3) with rating suitable for above pump.

Supply of Control Panel cum starter suitable for above pumpset. MS Steel fabricated cubical type dust & vermin proof, floor mounted with front door 14/16 SWG, rubber chord lining to prevent dust and moisture duly painted of super enameled gray paint of reputed make with provisions of ventilator on the side of the wings, cable entry holes for cable entry holes for cable for incoming and outgoing with internal wiring in copper wire with copper bus bars (3 Phase + 1 neutral) of suitable capacity having specification as under (as per IE rules)

Supply of Valves as per below for IPS IInd Kutha Pumping Station: a) 200 mm size cast steel D/F sluice valves, class 150 or as compatible to above pumpset, for suction side.

b) 150 mm size cast steel D/F sluice valves, class 600 or as compatible to above pumpset, for delivery.

c) 150 mm cast steel D/F non return valve, class 600 or as compatible to above pumpset, 01 No. for delivery side and 01 No. for rising main.

Making Tee, bend, reducer and enlarge by welding for suction and delivery side both as per requirement of side and piping condition, including pipe, labour, material, T&P etc. complete in all respect.

Supply and fixing of gauges and fittings as per below: i) Pressure gauge 100 mm dial size of 0-100 kg/cm2 or as compatible to above pumpset or as compatible to above pumpset – 01 no. ii) Compound gauge 100 mm dial size of 0-1 Kg/cm2 or as compatible to above pumpset – 01 no. iii) Heavy duty control cock – 01 no. iv) M.S. Nipple, Pipes Elbows etc. required for fixing the above gauges on pump – 01 set.

Supply of copper conductor flat submersible cable 50 mm2, 3 core 1100 volts as per IS: 694.

Dismantling of existing pumping plants and Accessories:- Dismantling and removing of existing pump set and valves etc. and making of new foundation according to the new pumpset & handing over the same to the department as per the direction of Engineer incharge.

Cartage of heavy duty materials like pump motor, starter panel to the site of work by pulling and pushing method upto site from road head of Ghat clear water pump house.

Base Frame, Coupling set, with coupling guard for above pumpset.

EARTHING (For Pre Settling (O-Point) Pumping Station) Double Loop earthing of all electrical equipments (such as motor, starter, panel & transformer etc.) I/C supply of copper earth strips, copper earth plates, GI boxes, funnel, pipe etc. as required as per latest IE rules will be carried out by the contractor, I/C digging of pits, filling of charcoal and salt in pits complete in all respects (As per IE rules) detailed as below – I) For Control panel II) For Transformer

Installation, commissioning & testing of complete pump plant including all valves.

IPS IInd Kutha Pumping Station

Providing and supply of Energy Efficient Centrifugal pump with discharge capacity 2250 LPM, Head 360 mtr., RPM 2900 with the following specifications:- Suction Casing materials – CI, Casing – WCB, Stage Casing – CI, Impeller – Bronze, Shaft & Sleeve – SS-410

Providing and supply of Energy Efficient Motor (IE3) with rating suitable for above pump.

Supply of Control Panel cum starter suitable for above pumpset. MS Steel fabricated cubical type dust & vermin proof, floor mounted with front door 14/16 SWG, rubber chord lining to prevent dust and moisture duly painted of super enameled gray paint of reputed make with provisions of ventilator on the side of the wings, cable entry holes for cable entry holes for cable for incoming and outgoing with internal wiring in copper wire with copper bus bars (3 Phase + 1 neutral) of suitable capacity having specification as under (as per IE rules)

Supply of Valves as per below for IPS IInd Kutha Pumping Station: a) 200 mm size cast steel D/F sluice valves, class 150 or as compatible to above pumpset, for suction side.

b) 150 mm size cast steel D/F sluice valves, class 600 or as compatible to above pumpset, for delivery.

c) 150 mm cast steel D/F non return valve, class 600 or as compatible to above pumpset, 01 No. for delivery side and 01 No. for rising main.

Making Tee, bend, reducer and enlarge by welding for suction and delivery side both as per requirement of side and piping condition, including pipe, labour, material, T&P etc. complete in all respect.

Supply and fixing of gauges and fittings as per below: i) Pressure gauge 100 mm dial size of 0-100 kg/cm2 or as compatible to above pumpset or as compatible to above pumpset – 01 no. ii) Compound gauge 100 mm dial size of 0-1 Kg/cm2 or as compatible to above pumpset – 01 no. iii) Heavy duty control cock – 01 no. iv) M.S. Nipple, Pipes Elbows etc. required for fixing the above gauges on pump – 01 set.

Supply of copper conductor flat submersible cable 50 mm2, 3 core 1100 volts as per IS: 694.

Dismantling of existing pumping plants and Accessories:- Dismantling and removing of existing pump set and valves etc. and making of new foundation according to the new pumpset & handing over the same to the department as per the direction of Engineer incharge.

Cartage of heavy duty materials like pump motor, starter panel to the site of work by pulling and pushing method upto site from road head of Ghat clear water pump house.

Base Frame, Coupling set, with coupling guard for above pumpset.

EARTHING (For IPS IInd Kutha Pumping Station) Double Loop earthing of all electrical equipments (such as motor, starter, panel & transformer etc.) I/C supply of copper earth strips, copper earth plates, GI boxes, funnel, pipe etc. as required as per latest IE rules will be carried out by the contractor, I/C digging of pits, filling of charcoal and salt in pits complete in all respects (As per IE rules) detailed as below – I) For Control panel II) For Transformer

Installation, commissioning & testing of complete pump plant including all valves.

MITTAL MACHINES PVT LTD