PROVN OF FLAG STAFF INCLUDING FLAG BASE, MAST, FOCUS LIGHTING AND A SUITABLE PAVED AREA AROUND IT IN FRONT OF THE HELIPAD AT ICG LAND MUNDRA

Amount

Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose soil.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation laying of pole stay assembly and laying of LT/HT cable and getting out in any type of soil complete all as specified and directed by the Engr-in-Charge

Returning filling in including spreading ,levelling,watering and wall ramming in layers not exc 25cm in any type of soil complete all as specified and directed.

Removing excavated material (soils) n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for cement concrete Type D2 1:4:8 (40 mm graded aggregate) in in foundations, filling and mass concrete.

M&L for hardcore (broken stone / boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

M&L for 150 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

M&L for pre-cast cement concrete block masonry 1:5:8 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete

M & L for sand filling under floors or in foundations including spreading, levelling, watering and consolidation

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4

M&L for 6mm dia steel guy wire including anchoring

M&L for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including poining in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Supply and fixing stainless steel chain (grade 304) as in flag post including all fixing arrangements fixed grouted with and including necessary anchor bolts steel fasteners including welding grinded the corners for smoothening including necessary hook arrangements for flag rope etc. complete all as specified and as directed by Engineer-in-charge.

Supply and fixing GI Flag Mast Pole of varying diameter complete all as specified and as directed by Engineer-in-charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade, with grey cement and pigment complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 in kerb stones

Supply and fix energy saving, environmental friendly LED Flood light 50W IP65 protected SMD LED floodlight with pressure die-cast aluminium housing, complete with driver and all necessary accessories like clamps and angle iron support etc complete all as specified and directed.

Supplying & laying factory made unreinforced Precast concrete cover of class LV, type 1, flat, size 250 mm x 150 mm x40mm for protection for cable all as specified .

M&L for dry Sand filling in cable trenches for protection of cables with two layers below and above cable and punned down to specified thickness complete as directed. Note: Punned down thickness shall only be measured for payment.

Supply and laying / fixing GI tubing light grade of 50 mm dia for cable protection.

Supply, laying, testing & commissioning of LT Cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(heavy duty) with stranded aluminium conductor, 1100 volts grade, of cross sectional area 16 sq mm, 4.0 core all as directed.

S & F PVC flat twin core cable of size 2.5 Sqmm with aluminium conductor complete all as specified and directed by Engineer - in - Charge

S&F FRP based outdoor type Junction box pole Hinged (L) mounted with clamps and complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 Amp complete with connection, testing and commissioning.

S and G Construction

Laxmi Enterprise