Loading…
Loading…
Tender Value
₹16.8 L
EMD Value
₹16,900
Closing Date
4 Feb 2026, 5:15 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer - II
Circle 2 Office, Satyanarayanapuram
Construction of urinals and toilets in Dr.NTR commercial shopping complex ground floor in 23rd Division under AE5 Section Circle-II
893331
Rc.E11-120818/2025
OPEN
Civil Engineering Works
NTR, ANDHRA PRADESH
5 documents required · 4 mandatory · 1 optional
₹595
₹16,900
28 Jan 2026
28 Jan 2026
28 Jan 2026
Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. For 300mm dia piles
Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. for up to 300mm dia
Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, as per SS - 20 B (APSS 308)
Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.
Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH
Supply and placing of the RCC M25 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
C) Plinth Beams
E) Roof beams FF
Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete
Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete. FF
Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH
Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete. (Internal) FF
Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete (EXTERNAL) FF
Plastering for Celing in CM (1:3) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete. FF
Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (Internal)
Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (Internal) (2 Couts Plastared surface)
Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (EXTERNAL)
Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap etc., complete. MAT-01789
Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice. LAB-00168
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm BMW-D.05
Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice. BMW-D.06
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm BMW-D.34
Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24)
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.
MAT-07652 (110mm Dia)
MAT-07650 (75mm Dia)
Urinal push cocks
Nylon connections
Waste couplings
Steel jollies 5"
11/4" PVC E lbows
21/2" nany traps
1" tank nipples
3/4" x 1/2" brass elbows
3/4" plain elbows
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)
28.80mm ODPipe - SDR 13.5 BMW-I.222
15.90mm ODPipe - SDR 13.5 BMW-I.220
22.20mm ODPipe - SDR 13.5 BMW-I.221
Supply & Fixing of CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make etc., complete as directed by departmental authorities.(BMW-E.22)
Supply & Fixing of NP soap dish heavy type with NP SCREWS etc., complete as directed by departmental authorities. (BMW-I.28)
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.6Kg/Cm.Sq MAT-07655 For 160MM CHASSING
Construction of 0.60 x 0.60 M (2' x 2') Inspection Chamber depth varying from 0.60 Mt. to 0.90 Mt. with a slope of 30mm in the channel along with sewer lines as per the approved departmental drawings including earth work excavation and laying of M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing coverslab of 75mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including cost and conveyance of all materials, seignorage charges including cost and fabrication of steel used in R.C.C as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325)
Plumbing and drainage charges including all labour charges etc.,complete as directed by the departmental authorities.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ-120818-2025.xlsx
TENDER_DOCUMENT • 0.02 MB
NIT-120818-2025.doc
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid