GDS11OF 2021-22 DATED 13-12-2021MAIN GATE

Amount

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 4.5Mtrx3.5Mtrx1mm + 1.2Mtr x 3.5Mtrx1mm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Spacing for hollow rectangular channels 80mmx40mmx1mm, Qty 20 No, Length 3.5 M,

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded Steel strips 60mmx1mm (Including braces and other allied material)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing bright finished brass hard drawn hooks and eyes 300 mm

Providing and fixing of steel work Length 40 Mtr with spacing of 3 Mtr Angle iron 45x45x6mm, height 1mtr, 14 Posts , Flat iron 40x4mm Vertical 14 x1 Mtr=14 Mtr Horizontal 2x 40mtr=80 Mtr

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.

Providing of graphic matting for 03 No rooms

M/S SONA- ULLAH BHAT

M/S MOHD AMIN PANDIT