RESTORATION

Amount

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete in first class Budloo wood.

Removing of the CGI Sheets (45sft)and refixing of CGI sheets including washers, nails, etc (90 sft) the quantity is available at divisional store

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc: 32mm dia. Nominal bore,

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling/Socket For 15.88mm outer dia pipe

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling/Socket For 34mm outer dia pipe

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).For 32 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).For 15.88 mm Outer dia pipe

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).For 34mm Outer dia pipe

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90o Item No. (19.81) For 15.88 mm outer dia pipe

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90o Item No. (19.81)For 34.00 mm outer dia pipe

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling/Socket. Item 19.83. For 34.00 mmx28.58 mm outer dia pipe

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.(Item 19.53) 15mm nominal bore, 105mm long, weighing not less than 138gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.(Item 19.53) 15mm nominal bore, 105mm long 25mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing C.P. Brass extension nipple (size15mmx50mm) of approved make and quality as per direction of Engineer-incharge.(Item 19.43A)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete,(19.12) 15 mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete,(19.12) 25 mm nominal bore.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931.(Item No. 19.43).

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931(Item No.19.39)

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity –White.(Item No. 18.19.1)

Carriage for Wood Appox. 3km.

Labour charges for removal and refixing of CGI sheets/Truss Work.CARPENTER

Labour charges for removal and refixing of CGI sheets/Truss Work.Beldar

ZAHID IMTIYAZ RAINA

MUDASIR HAMID