Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.1 L
Closing Date
1 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
NOR WORKS
18 conditions · 4 needing a document upload
Financial Eligibility Criteria: as per Clause 10.2 of Part-I of IRSGCC-2022 and as per Railway Board Advance correction slip No.1 dated 14-07-2022 The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less: where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Account duly supported by Audit balance Sheet .
Financial Eligibility Criteria: As per Clause 10.2 of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) and the same is mentioned in Para No.10.2 page no. 15 of this tender document. Tenderer should attach Self-attested/ Digitally signed copy of Certificate showing minimum average annual contractual turnover as per Annexure V I B of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) in Annexure - "F"Page-32 of Master Document - 1 attached to the tender
C.V Any Civil Engineering Work / Zonal Maintenance works
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender .
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the 1.1.1 Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfil technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub-let, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work 1.1.2 experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Instructions to Tenderers and Conditions of Tender: Tenders are refer Annexure-I, Tender Form (Second Sheet) Part-I of IRSGCC-2022 is mentioned from page No. 11 - 26 of Master Document -1 attached to the tender.
17 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e. OS/Tenders/Engg) / BZA Division) as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General Instructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender document and strictly adhere to the instruction and directions given therein.
Annual Zonal contract repairs and maintenance works from Pulla (exclusive) to Kadiyam (exclusive) in ADEN/RJY Jurisdiction for the period from 1.7.2026 to 30.6.2027.
E-ZONE-N5-RJY-2026
E-ZONE-N5-RJY-2026
Open
Works - General
12 Months
Krishna, Andhra Pradesh
₹0
₹2.1 L
1 Jun 2026
8 May 2026
18 May 2026
63 items across 1 schedule · ₹9,00,364 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of chlorimated polyvinil - chloride (CPVC) pipe 15mm outer dia with all contractors transportation, lead & lift, taxes stacking at desired location etc. as per as | Metre | 25.00 | 66 | 1,650 |
| 2 | S u p p l y of Hydraulic d o o r c l o s u r e ISI marked (IS:3564-1996) e t c . of standard make with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 5.00 | 754 | 3,770 |
| 3 | Supply o f Oxidised m i l d s t e e l sliding d o o r bolt 250x16 mm etc. with all contractors transportation, lead & lift, taxes, stacking a t desired location etc. as per as directed by the Engineer In charge at site. | Each | 85.00 | 108 | 9,180 |
| 4 | Supply of Oxidised mild steel handles 125 mm etc. with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 80.00 | 27 | 2,160 |
| 5 | Supply of Nails 25-100mm long etc. with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Kg | 50.00 | 78 | 3,900 |
| 6 | Supply of Glass sheet (Pin headed) 4 mm thick etc. w i t h a l l contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Sqm | 15.00 | 465 | 6,975 |
| 7 | Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 110mm dia etc. with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Metre | 50.00 | 175 | 8,750 |
| 8 | Supply of White plastic W C seat (solid) with lid C.P. brass hinges and rubber buffers etc. with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 10.00 | 552 | 5,520 |
| 9 | Supply of white, vitreous china w etc., - Flat back wash basin of size 600x450 mm e t c w i t h all contractors transportation, l e a d & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 5.00 | 977 | 4,885 |
| 10 | Supply of Vitreous china Orissa type w.c. pan size 580 mm (White) etc. with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 45.00 | 1,738 | 78,210 |
| 11 | Supply of Vitreous china pedestal type water closet (White) e t c . w i t h all contractors transportation, lead & lift, taxes, stacking a t desired location etc. as per as directed by the Engineer In charge at site. | Each | 25.00 | 1,381 | 34,525 |
| 12 | Supply of C.I. bracket for wash basin and sinks etc. w i t h a l l contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Pair | 5.00 | 119 | 595 |
| 13 | Supply of Coloured (other than black)solid P.V.C. seat in European W.C. pan etc. with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 10.00 | 472 | 4,720 |
| 14 | Supply of Rectangular shape 453x357 mm Mirror with Plastic moulded frame etc. with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 5.00 | 391 | 1,955 |
| 15 | Supply of Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 7 0 0 m m i/c PVC waste fittings etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 80.00 | 34 | 2,720 |
| 16 | Supply of Unslaked lime with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Quintal | 100.00 | 414 | 41,400 |
| 17 | Supply o f Oxidised m ild steel tower b o l t (barrel t y p e ) 2 0 0 x 1 0 m m with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 140.00 | 46 | 6,440 |
| 18 | Supply of Oxidised mild steel screws 20 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 2000.00 | 0.43 | 860 |
| 19 | Supply o f Anodised Aluminium sliding d o o r bolt 300x16 m m w i t h all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 198 | 1,980 |
| 20 | Supply o f Anodised Aluminium sliding d o o r bolt 250x16 m m w i t h all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 20.00 | 172 | 3,440 |
| 21 | Supply of Anodised Aluminium tower bolt (barrel t y p e ) 1 5 0 x 1 0 m m with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 45.00 | 41 | 1,845 |
| 22 | Supply of Anodised Aluminium tower bolt (barrel t y p e ) 1 0 0 x 1 0 m m with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 50.00 | 30 | 1,500 |
| 23 | Supply of Anodised Aluminium handles 125 mm with plate 175 x 32 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 75.00 | 44 | 3,300 |
| 24 | Supply of Anodised Aluminium hanging type door stopper with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 65.00 | 27 | 1,755 |
| 25 | Supply of Water proofing cement paint / snowcem with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 50.00 | 51 | 2,550 |
| 26 | Supply of Water proofing compound (pH>7, Sp.Gravity 1.06±0.02, conforming to IS:2645) with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 150.00 | 47 | 7,050 |
| 27 | Supply of 15 mm PTMT bib cock with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 90.00 | 88 | 7,920 |
| 28 | Supply of 15 m m PTMT bib cock long body with flange with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 55.00 | 135 | 7,425 |
| 29 | Supply of 15 mm dia PTMT stop cock with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 15.00 | 81 | 1,215 |
| 30 | Supply of PTMT push cock 1 5 m m d i a w i t h all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 240.00 | 74 | 17,760 |
| 31 | Supply of Brass bib-cock 15 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 55.00 | 404 | 22,220 |
| 32 | Supply of C.P.Brass long body bibcock 15mm with a l l contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 60.00 | 674 | 40,440 |
| 33 | Supply of Brass stop-cock 15 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 283 | 2,830 |
| 34 | Supply of C.P. Brass angle valve 1 5 m m w ith all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 472 | 4,720 |
| 35 | Supply of 20 mm dia Gunmetal gate valve with wheel of desired brand / make contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 5.00 | 438 | 2,190 |
| 36 | Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 5.00 | 505 | 2,525 |
| 37 | Supply of Polyethylene water storage tank with cover a n d suitable locking arrangements with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Litre | 11000.00 | 8 | 88,000 |
| 38 | Supply of Unplasticised P.V.C. connection pipe with brass union 45 cm long 15mm b o r e w i t h all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 101.00 | 47 | 4,747 |
| 39 | Supply of G.I. pipes 50 mm dia including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Metre | 20.00 | 485 | 9,700 |
| 40 | Supply of H.P. or L.P. ball valve with polythene floats: 20 mm dia including all contractor's labour, lead and lift, taxes etc., a n d as directed by Engineer in charge at site | Each | 10.00 | 323 | 3,230 |
| 41 | Supply of C.I. sluice valve (with caps) class I : 100 mm dia including all contractor's labour, lead and lift, taxes etc., a n d as directed by Engineer in charge at site | Each | 5.00 | 3,301 | 16,505 |
| 42 | S u p p l y of fine sand(Zone IV) i n c l u d i n g all contractor's labour, l e a d a n d lift, taxes and including stacking a t desired location as per the directions of Engineer in charge at site | cum | 60.00 | 1,436 | 86,160 |
| 43 | S u p p l y o f b l e a c h i n g p o w d e r i n c l u d i n g all contractor's l a b o u r , l e a d a n d lift, taxes and including stacking a t desired location as per the directions of Engineer in charge at site | Quintal | 15.00 | 2,435 | 36,525 |
| 44 | Supply of uPVC coupler for UPVC drainage pipes 110 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 53 | 530 |
| 45 | Supply of UPVC plain shoe 110 mm bend with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 63 | 630 |
| 46 | Supply of UPVC pipe clip 1 1 0 m m bend w ith all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 12.00 | 19 | 228 |
| 47 | Supply of C.I. grating 100x100 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 77.00 | 54 | 4,158 |
| 48 | Supply of Vitreous china pedestal for wash basin with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 5.00 | 1,280 | 6,400 |
| 49 | Supply of Coloured Orissa pattern W.C. pan 580x440 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 2,156 | 21,560 |
| 50 | Supply of Coloured High density polyethylene / poly propylene 10 lit. (full flush) capacity controlled low l e v e l fl u s h i n g c i s t e r n w i t h fi t t i n g s w i t h all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 741 | 7,410 |
| 51 | Supply of Flushing Cistern P.V.C. 1 0 litre capacity (low level) (White) (with fittings,accessories and flush pipe) with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 44.00 | 775 | 34,100 |
| 52 | Supply o f Vitreous c h i n a fl a t b a c k wash basin 630x450 mm including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 5.00 | 977 | 4,885 |
| 53 | Supply of C.P. Brass bibcock 1 5 m m including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 10.00 | 674 | 6,740 |
| 54 | Supply of PTMT push cock 15 mm dia including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 25.00 | 74 | 1,850 |
| 55 | Supply of Mirror of superior make glass 60x45 cm including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 5.00 | 606 | 3,030 |
| 56 | Supply of G.I.pipes 15mm dia including all contractor's labour, lead & lift, taxes etc and as directed by the Engineer in charges at site. | Metre | 20.00 | 128 | 2,560 |
| 57 | Supply of G.I.pipes 20mm dia including all contractor's labour, lead & lift, taxes etc and as directed by the Engineer in charges at site. | Metre | 50.00 | 175 | 8,750 |
| 58 | Supply of G.I.pipes 25mm dia including all contractor's labour, lead & lift, taxes etc and as directed by the Engineer in charges at site. | Metre | 20.00 | 264 | 5,280 |
| 59 | Supply of G.I.pipes 32mm dia including all contractor's labour, lead & lift, taxes etc and as directed by the Engineer in charges at site. | Metre | 30.00 | 303 | 9,090 |
| 60 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia with all contractors transportation, lead & lift, taxes stacking at desired location etc as per as directed by the Engineer in charges at site | Metre | 40.00 | 108 | 4,320 |
| 61 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia with all contractors transportation, lead & lift, taxes stacking at desired location etc as per as directed by the Engineer in charges at site | Metre | 40.00 | 172 | 6,880 |
| 62 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia with all contractors transportation, lead & lift, taxes stacking at desired location etc as per as directed by the Engineer in charges at site | Metre | 20.00 | 310 | 6,200 |
| 63 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia with all contractors transportation, lead & lift, taxes stacking at desired location etc as per as directed by the Engineer in charges at site | Metre | 336.00 | 506 | 1,70,016 |
| Schedule total | ₹9,00,364 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
15STEELSPECIALCONDITIONS.pdf
ATTACHMENT
schedulerjyzone.pdf
ATTACHMENT
1MasterDOCZoneRJY.pdf
ATTACHMENT
2ADRMsanction.pdf
ATTACHMENT
5GeneralConditions.pdf
ATTACHMENT
6SPECIALCONDITIONSFORBUILDINGWORKS.pdf
ATTACHMENT
8ESO79-SystemImprovementregarding-OperationofZonalContracts.pdf
ATTACHMENT
9RevisedApprovedlistofBrandsandMakes2026withallenclosures26-02-26.pdf
ATTACHMENT
10SimilarNatureofWorks02-12-25.pdf
ATTACHMENT
11SAFETYPRECAUTIONSTOBETAKENATWORKSITE.pdf
ATTACHMENT
12SPECIFICATIONSOFCONTROLLEDCONCRETE.pdf
ATTACHMENT
13SPECIFICATIONSFORROOFINGWITHCOLOURCOATEDGALVALUMESHEETS.pdf
ATTACHMENT
7DESIGNMIXHQrsLETTERONSPECIALCONDITIONSFORDESIGNMIX2123-03-2022.pdf
ATTACHMENT
14Sr.DFMzonevetted2026-27pdf.pdf
ATTACHMENT
16TRDConditions.pdf
ATTACHMENT
MasterDoc0219-03-2026.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
4NSitemsRjy.pdf
ATTACHMENT
schedulerjyzone.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .