ADDN/ALTN TO BLDG NO P-104 AT AF STN AWANTIPUR

B/R PORTION

Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in soft / loose soil all as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling & mass concrete all as specified and directed.

Reinforced cement concrete design mix M- 30 (using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete (reinforcement to be measured separately).

Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete (reinforcement to be measured separately).

M&L for reinforced cement concrete (design mix) M-30 using 20mm graded stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span; all as specified and directed. Note : Reinforcement shall be measured and paid separately.

M&L for reinforced cement concrete (design mix) M-30 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; all as specified and directed. Note : Reinforcement shall be measured and paid separately.

S&F for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F for TMT bars 6 mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish surface of concrete flat all as specified and directed.

M&L for formwork to sides of pillars, columns etc; rough finish surface of concrete square, rectangular or polygonal all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, etc. also splays between floors and beams, etc. rough finish surface of concrete flat all as specified and directed.

Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm all complete as specified in soil.

Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point all as directed.

S&F Roof trusses (framed), trussed, posts, struts, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm, deep and getting out in soft/loose soil complete all as specified and directed.

M&L 100 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directed

M&L for sand filling of 25mm thick in floors or in foundations including watering and consolidation all specified and directed

M & L Machine pressed precast concrete interlocking pavour block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with glossy finish colour shade complete all as specified and directed by Engr-in-Charge.(Sand will be measured & paid separately )

M&L 25mm PCC 1:2:4 Type B-0 (Using 12:5mm stone agg) as in sub base floor , complete all as directed and specified .

S&F 2nd class hardwood of 30 mm thick, planed one sided & edges tongued and grooved or reabatedd, and boarding in floors and skirting etc all as specified and directed by engineer in charge.

M&L coloured/printed non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the white tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 450x300x7mm / 350x 250x 7 mm / 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L coloured/printed ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

Taking down (Steel/ Wooden) chowkhats of frames of any description n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed.

All as per Srl Item No 11 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed.

S&F of 2nd class hard wood Plain solid straight chowkhats of wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of surface in contact with walls all as specified & directed

S&F of 2nd class hard wood 30mm thick glazed & skeleton shutters for windows , open rebated & prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of member of shutters as spd in SSR part-1 sec 8 clause 8.24(b) supplied and fitted to chowkats all as specified and directed ,carving ,designing on shutters as per direction of engineer in charge .

S&F for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads/ MS square tube in square panes not exc 0.50 sqm each fixed with steel frame work complete all as specified and directed.

S&F for 5 mm thick Figured glass, pin head type and glazing with oil putty in squares/rectangular n exc 0.5 sq. m in each pane complete all as specified and directed.

4.8 mm thick sheet glass, ground or obscured or frosted/ tinted and glazing with oil putty or fixed with bead/glazing pins in squares of exe 0.5 sqm in each pane all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

Supply and fixing of Toughened glass of 12mm as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required (toughened glass at the centre with 8fbsu emblems embedded & black/any preferable colour as per the design directed by Engineer-in-Charge) of comprising of the including all connecting accessories ie joining cleats, glazing clips, rubber neoprene packing, long size handles 2 Nos in each door, hinges etc. complete all as specified

S&F Anodised aluminium frame for doors, windows and ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing of 0.55 kg/RM including fixed with aluminum beading, silicon lining and gaskets, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed

S&F anodised aluminium door shutters, aluminium section weighing 1.10kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Taking down aluminium shutter n. exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured separately as supply and fix.

Taking down aluminium shutter exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured separately as supply and fix.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheets all as per specification & drawing

S&F of factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F 125 mm long stainless steel butt hinges medium weight with stainless steel screw complete.

S&F extruded aluminum alloy handles of size 150mm fabricated type anodised complete.

S&F Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed complete.

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long complete all as specified and directed.

S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F of door closer cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair brass 4-levers Mortice lock, vertical type, size 100mm for aluminium door complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/blankets any thickness including grid work/aluminium frame work, cover fillets complete all as specified.

S & F of decorative type wall panelling incl polishing with PU wood polish on wooden surface of approved shade with necessary fitting with complete all as specified.

Providing and Fixing False ceiling with semi perforated 12mm thick micro GRG false ceiling tiles at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tiles of size 595 x 595mm of approved texture , design and patterns having moisture content less then 2% humidity resistance of 99%, NRCO. 52 to 0.75 as per is 8225: 987,non combustible as per BS476 (part 4) -970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metals-Grid of hot dipped galvanised iron section of 0.33mm thick (Galvanised @ 120 gms per Sqm including both sides) comprising of main-T runners of size 15 x 32mm of length 3000mm, cross - T of size 15 x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to from grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (Galvanizing 80 gms per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- Shape level adjuster of size 85 x 25 x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engr-In-Charge.

M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.

Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified.

M&L for Preparation of newly plastered or un-plastered surfaces of walls and applying two coats of Acrylic washable distemper over coat of 3 mm putty and make surface smooth finishing , complete all as specified and directed.

Preparing new plastered or un-plastered surfaces of walls and applying two coats of Acrylic exterior emulsion paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown) over a coat of acrylic primer, complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson

S & F in repair curtain rails of stainless steel with fixing brackets, stops, rollers, funnels etc complete.

S&F in repair floor mounted vitreous china any colour, wash hand basin, box type flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste fitting , brass, chromium plated with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC connection and 15mm size with CP brass coupling nuts of length 450mm, trap, grating and union for discharge pipe, chain and plug and porcelain stopper and all accessories fixed in repair, complete all as specified and directed.

S&F in repair European wall mounted white Vitreous China wash down water closet including hydraulic seat cover made using high quality material fine finishing for elegant aesthetic look P/S trap , connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, fixed complete including demolition of old unserviceable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed.

Taking up or down steel tubing of 15mm bore and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing of 20mm bore and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI tubes medium grade 20 mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

M&L for cutting chases, pinning in making good to facing where required and pointed in CM 1:3 to ends or edge of landing, steps cills, sunshade, shelves etc and cutting chases for concealed water tubing in stone concrete block or slab walls etc and making good cutting n exc 10 cm girth complete all as specified and directed

S&F 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water storage tanks of capacity more than 500 to 1000 litres capacity complete all as specified and directed.

S&F in repair ball brass valve ,high pressure with polythene float and flynut complete screwed for iron pipe or ferrule 20mm bore fixed complete all as specified and directed

S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair CP Stop valve/Angle valve 15mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure, screwed both ends for pipe or for unions, complete all as specified and directed.

S&F in repair 15 mm bore PVC connection with PTMT of length 450 mm complete all as specified and directed.

S&F in repair wall mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed

S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection complete all as specified and directed.

S&F in repair Brass CP sink mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed.

S&F in repairs Health Faucet CP with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook . Make : (Hindware :- Cat Part No - F160027) , ( Prayag : CAT Part No : BEA-40S ) , complete all as specified and directed.

S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement , complete all specified and directed.

S&F in repair of PVC (SWR) floor trap of 75mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair of PVC (SWR) floor trap of 110mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair of PVC (SWR) bends any radius of 75mm bore, complete all as specified and directed.

S&F in repair of PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed.

Dismantling of PVC drain pipes, jointed in cement mortar and taking out of renches, if required complete all as specified and directed.

S&F PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.

S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.

Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 grade, all as specified and directed.

Dismantling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/cladding/eave etc complete all as specified.

S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge.

S&F Galvanised plain mild steel sheeting 0.63mm thickness fixed with 'L' type or 'J' or cranked hook boltes with washers, in roofs as in ridge etc all as specified and directed.

S&F 1.00mm thick Plain, galvanised, mild steel sheeting, in eave board & straight flashings (length & girth as fixed) with welded and shouldered joint to be provided all as specified and directed by Engr in charge.

Preparation of new surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown) over a coat of acrylic primer complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson

Preparation of old painted surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown), complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson.

Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, moss and efflorescence salts and trading oil and greasy spots etc and applying two coat of exterior acrylic emulsion paint over a coat of primer in camouflaging (Disruptive) pattern in three colours (Green, grey and brown), complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson

E/M PORTION

Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface complete all as specified.

M&L carefully taking down existing electric geyser (storage or instant type) from its installed position without damage, keeping it in safe custody of the contractor; refixing the same at the desired new location including mounting arrangement and necessary repairing, reconnection of plumbing and electrical connections, testing for proper operation, and making good any disturbed surfaces, all complete as directed.

M&L for carefully taking down and shifting existing split-type air conditioner (indoor and outdoor units) along with its voltage stabilizer, ensuring refrigerant gas is properly pumped down and retained; keeping all components in safe custody of the contractor. Refixing the same at the desired new location, including mounting of units, reconnection of refrigerant piping, electrical wiring, drain pipe in concealed wall suitable pipe internally, stabilizer installation, testing for proper operation, and making good all disturbed surfaces complete all as specified and as directed. Note : Gas filling, if required during reinstallation, shall be deemed to be included in the rate quoted by the contractor

M&L for point wiring with 2 runs of 1.5 sqmm, 1100V grade, FRLS/FRLSH multistranded copper conductor cable drawn through rigid PVC conduit (minimum 20mm dia) fixed concealed in walls surface with all necessary accessories (bends, tees, saddles, etc.) Includes 1 run of 1.5 sqmm copper earth wire, modular pvc box with suitable modular type cover plate and frame for mounting modular switches, sockets, or fan regulators, connected to common earth dolly, complete all as specified for: (a) One light/fan/bell point controlled by one no. one-way 5/6A modular switch.

(b) All as per srl item No 97.00 here-in-before but using One 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch.

(c) All as per srl item No 97.00 here-in-before but using One 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch.

All as per srl item No 97.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 1.5 sqmm as continuous earth cable for 15/16 Amps socket outlet, independent controlled by one nos, one way switch complete all as specified.

S&F in replacement of modular piano type switch one way one module, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified.

S&F in replacement of modular piano type socket outlet flush type 2 module, 5 pin, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.

S&F in replacement of modular piano type switch one way one module, SP, flush type 15 Amps, 230 volts AC, 50 Hz complete all as specified.

S&F in replacement of modular piano type socket outlet flush type 2 module, 5 pin, 5/15 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.

S&F in replacement of ceiling rose 3 terminals, PVC/polycarbonate/bakelite, isolated body 230 volts AC, 50 Hz complete all as specified.

Supply, laying and testing cable XPLE insulated,screened,PVC bedded, galvenised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 Sqmm,4 core.

Supply and fix in replacement submain wiring with 2x4 sqmm PVC insulated unsheathed multi-stranded single core FRLS/FRLSH copper conductor cables (1100 volts grade), drawn in ISI marked conduit pipe in concealed with accessories, along with 1x4 sqmm PVC insulated unsheathed copper conductor for continuous earth wire, including making good the disturbed surfaces, complete as specified. (For ACs & Geysers)

Supply and fix in replacement submain wiring with 2x6 sqmm PVC insulated unsheathed multi-stranded single core FRLS/FRLSH copper conductor cables (1100 volts grade), drawn in ISI marked pvc conduit in concealed with accessories, along with 1x6 sqmm PVC insulated unsheathed copper conductor for continuous earth wire, including making good the disturbed surfaces, complete as specified.

Supply, laying and testing cable XPLE insulated,screened,PVC bedded, galvenised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm,4 core.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of new/serviceable cables or for fault finding in existing cable and getting out soil in soft/loose soil complete all as specified.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified.

Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point of any type of soil complete all as specified

M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable all as specified. Note: Punned thickness of sand shall be measured & paid.

M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to length of brick complete all as specified.

S&F in replacement LED tube light fitting 1x20/22 watts, 220 volts AC, 1200 mm, with aluminium housing & integrated electronic driver complete with driver with polycarbonate diffuser & thd< 10% including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make- Havells / Wipro/ Crompton

Supply and fixing in replacement of LED tube light fitting, box type, 230 Volts AC, suitable for 2 feet, 10 Watt, 220 V AC mirror type LED tube light with high output diffuser, decorative type, including integrated driver, lamp, and holder, fixed on wall/ceiling, and connected with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engineer-in-Charge. Make: Havells / Wipro / Philips

S&F in replacement Inverter LED batten 20/22 Watt with Opal Diffuser, 6000 K IP 20, battery back up to 3 hrs & Functioning as per product TDS complete all including and connecting up including mounting with all accessories.

S&F in replacement of decorative wall light, gold finish fixture with white glass suitable for 2X 7.5W led filament lamp / 9 W led lamp E 27 base of suitable size complete all including and connecting up including mounting with all accessories.

S&F Decorative Eros casting pole (length 3 meter) with Eros decorative arms(orbit Plus D Round Arm for pole) cast iron embellishments, Cast aluminium lighting fixtures, polycarbonate diffuser, stainless steel screws, Corrosion and UV ray resistant coating and including Eros LED post top IP 66 72 Watt victorian type light with aluminium enclosure and including base plate size 250X250X10m cast iron, including cable junction box having one 6 amp mcb and provision of 6 sqmm ,4 core cable incoming and outgoing and as per suitable size busbar concealed in PCC base of pole connecting up with all accessories complete all as specified and rectified ( PCC Work is paid and measured separately)

M&L for plain cement concrete in foundation 1:2:4 type B-2 with 40 mm graded stone aggregate to support the pipe/ angle/ as required on site including breaking of existing complete plastering work complete all as specified.

S&F in replacement of Vintage outdoor wall light, gold finish fixture with white glass suitable for 24 W led lamp E 27 base of suitable size and weight 1890 gm ,Dimensions 28x14X45cm complete all including and connecting up including mounting with all accessories

Supply and fixing Rimless Round metal panel light for ceiling 15 watt Led surface light 220 volts AC,Dimensions 14.5Lx14.5Wx3.8H centimeter recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating material like polyester epoxy quoted surface mounting 4 way TPN 415 volts, vertical type, surface mounting/ recess in wall & concealed with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete with & including one No. MCCB 100 Amps 3 pole/4 Pole 25 kA fixed type for incoming, complete all as specified and as directed.

S&F in replacement of sheet metal enclosure DB SPN 12 way, double door, 230 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.

S&F in replacement of sheet metal steel plug & socket DB SP with metal clad 2 pin & earth plug and socket SPN, 20 Amps, 230 volts AC, surface mounting type complete with one MCB SP, 20 Amps, 10 kA complete all as specified. (For ACs & Kitchen appliances)

S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, C curve type complete all as specified.

S&F in replacement of MCBs, SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified.

M&L for fixing of exhaust fan 300 mm sweep 220 V, single phase 50 Hz metal body four nos of blade, double ball bearing along with louvers & bird repellers including cutting chases and making good disturbed surfaces by cement mortar along with fixing with help of hole fastener. Complete all as specified and as directed.

S&F gun metal globe valve (in replacement) with iron handle screwed both ends for iron pipe and fixed of size 20 mm bore :- Make- Zoloto, Audcu, L&T

Supply and laying of galvanised steel water tubing medium grade (in replacement) trenches / wall /floor with all fittings , connections as required at site of size 20 mm bore.

Supply and laying of galvanised steel water tubing medium grade (in replacement) trenches / wall /floor with all fittings , connections as required at site of size 15mm bore.

S&F in replacement of wall mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed

S&F in replacement of 6 light candle chandelier gold transparent finish fixture with metal glass crystal suitable for 7.5W led filament lamp / 9 W led lamp including 6 Nos light and weight 4050gm,Dimensions 58X58X60cm ,Cord length 65 Cm , E14 holder type and suitable size complete all including and connecting up including mounting and hanging arrangement with all accessories.

Note :- An amount of Rs. 30,976.00 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.